[cisco-voip] Different MOH for multi site

[Kent Roberts]

Sorry, I said DevicePool. Its not.    If you are running SRST at the remote sites, multicast would do this very well with almost no work.  

Otherwise device level, or other options that have been listed.



> On Jan 5, 2021, at 1:17 PM, fred at browardcommunications.com wrote:
> 
> That’s where I’m confused, I don’t see where you can set a specific audio source per site, or device pool, in the device pool settings, you can just set a mrgl.
> 
> There will be many sites, more than 2, and the idea is if I call a phone at site A, I would get the Site A MOH audio source file, if I call site B I would get the site B audio source file, and so on.
> 
> 
> 
> Sent from my iPhone
> 
>> On Jan 5, 2021, at 3:05 PM, Kent Roberts <kent at fredf.org> wrote:
>> 
>> Multicast is easy since it’s 2 different sites
>> 
>> Otherwise use unicast. Setup your music in cucm, one fir each site and assign it-in the device pool or on each device 
>> 
>> 
>> Kent
>> 
>>> On Jan 5, 2021, at 12:52, fred at browardcommunications.com wrote:
>>> 
>>> Does anyone have a recommendation on how to have different MOH depending on what number / site is called?
>>> Cucm 12.5
>>> 2 node cluster
>>> Multi site
>>> 
>>> Thank you
>>> 
>>> Sent from my iPhone
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>