[cisco-voip] 8851 phone question

[Brian Meade]

You can have a different ring-tone per line.  You could use the route call
based on calling party number to send calls from a specific number to a
different line on the phone.

On Fri, Feb 4, 2022 at 11:31 AM James Dust <james.dust at charles-stanley.co.uk>
wrote:

> Afternoon all,
>
>
>
> I have been asked if it is possible to have a different ring tone on a
> Cisco 8851 when a specific CLI calls it? (so not the selected ring tone)
>
>
>
> We are using CUCM 12.5
>
>
>
> I personally I have never heard of this, but I though I’d ask.
>
>
>
> Thanks allot
>
>
>
> James
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and any
> attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220204/346b2e05/attachment.htm>