[cisco-voip] SIP to iTSP best practices

[Brian Meade]

I'd do E.164 inbound/outbound on the CUBE side even if you don't do E.164
in CUCM.

On Thu, Feb 10, 2022 at 11:15 AM Matthew Huff <mhuff at ox.com> wrote:

> We are in the process of migrating for a legacy PTSN voice gateway (PRI)
> to a new CUBE based SIP connection to a iTSP connected via a private metro
> ethernet (not Internet based). Does anyone have a good source for recipes /
> dial-plans recommendations / best practices for this?
>
>
>
>
>
>
>
> *Matthew Huff* | Director of Technical Operations | OTA Management LLC
>
>
>
> *Office: 914-460-4039*
>
> *mhuff at ox.com <mhuff at ox.com> | **www.ox.com <http://www.ox.com>*
>
>
> *...........................................................................................................................................*
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220210/b9543ba7/attachment.htm>