[cisco-voip] CUC 10.5 to 14 ER Not working

[Lelio Fulgenzi]

I wonder if it’s like cucm where you upgrade pub first without switch version then upgrade sub without switch version, then switch version on pub then on sub.

Sent from my iPhone

On Jan 3, 2022, at 2:07 PM, Mathew Miller <miller.mathew at gmail.com> wrote:



CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp at uoguelph.ca


Yes, Publisher upgraded and is on 14.X.

The post upgrade COP file when run on the pub says.

1.1  FAIL      Cluster Database Status (Node authentication and replication status)


When I do a utils dbreplication status it shows

Enterprise Replication not active  (62)
command failed -- unable to connect to server specified  (5)

Is that normal when in a cluster that the post upgrade COP file fails with this message or a symptom of the bug? You don't happen to have a bug ID do you?







On Mon, Jan 3, 2022 at 10:55 AM James Buchanan <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>> wrote:
Oh, the publisher moved to the new version, didn’t it? I remember Unity Connection doing that. It’s on version 14 already right? I think that’s a bug.

Probably the most straightforward way to resolve is to rebuild the subscriber from scratch.

On 3 Jan 2022, at 18:52, Mathew Miller <miller.mathew at gmail.com<mailto:miller.mathew at gmail.com>> wrote:


The subscriber will not upgrade.
I'm getting a failure on the pre-upgrade check for the subscriber.


1.1  FAIL      Network status (NTP, DNS, Cluster Connectivity)
     validate_network    : Error, intra-cluster communication is broken, unable
     to connect to X.X.X.X





On Mon, Jan 3, 2022 at 10:22 AM James Buchanan <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>> wrote:
Hello,

Have you upgraded the subscriber? That needs to be done before database replication will work.

Thanks?

James

On 3 Jan 2022, at 18:15, Mathew Miller <miller.mathew at gmail.com<mailto:miller.mathew at gmail.com>> wrote:


Hello,

Working on an upgrade from CUC 10.5 to 14.

Publisher finished and didn't seem to have any issues.

After running the post upgrade check COP file it fails

1.1  FAIL      Cluster Database Status (Node authentication and replication status)


When I do a utils dbreplication status it shows

Enterprise Replication not active  (62)
command failed -- unable to connect to server specified  (5)



utils dbreplication runtimestate it says


Cluster Detailed View from CUC-01 (2 Servers):

                                      PING      DB/RPC/   REPL.    Replication    REPLICATION SETUP
SERVER-NAME         IP ADDRESS        (msec)    DbMon?    QUEUE    Group ID       (RTMT) & Details
-----------         ----------        ------    -------   -----    -----------    ------------------
CUC-01           X.X.X.X     0.018     Y/Y/Y     --       (-)            (-) Replication Not Setup
CUC-02           X.X.X.X     0.125     Y/Y/Y     --       (-)            (-) DB-diff


I've attempted to reset replication this way.

https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/116942-technote-uc-00.html


It doesn't seem to be working for me. Replication status always just says not setup

Any ideas?


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220103/80567ead/attachment.htm>