[cisco-voip] CUC 10.5 to 14 ER Not working

[Lelio Fulgenzi]

How did this work out?

Sent from my iPhone

On Jan 3, 2022, at 3:52 PM, Mathew Miller <miller.mathew at gmail.com> wrote:



CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp at uoguelph.ca


It was failing the upgrade, so I went to try the tool again. It seems I had an expired ip-sec cert which was causing the problem. I regenerated that and a couple of magic reboots and it seems to be working now.

On Jan 3, 2022, at 11:46 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com> wrote:


It won’t upgrade or you are running the check and it’s failing?  It’s been a while since I’ve done one of these myself, but if it’s just the  check tool, try to just run the actual upgrade.

I believe the tool is intended to be run on all servers before you start anything.

From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Mathew Miller
Sent: Monday, January 3, 2022 1:54 PM
To: James Buchanan <james.buchanan2 at gmail.com>
Cc: Cisco VOIP <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] CUC 10.5 to 14 ER Not working

[EXTERNAL]

The subscriber will not upgrade.
I'm getting a failure on the pre-upgrade check for the subscriber.

1.1  FAIL      Network status (NTP, DNS, Cluster Connectivity)
     validate_network    : Error, intra-cluster communication is broken, unable
     to connect to X.X.X.X


On Mon, Jan 3, 2022 at 10:22 AM James Buchanan <james.buchanan2 at gmail.com<mailto:james.buchanan2 at gmail.com>> wrote:
Hello,

Have you upgraded the subscriber? That needs to be done before database replication will work.

Thanks?

James


On 3 Jan 2022, at 18:15, Mathew Miller <miller.mathew at gmail.com<mailto:miller.mathew at gmail.com>> wrote:

Hello,

Working on an upgrade from CUC 10.5 to 14.

Publisher finished and didn't seem to have any issues.

After running the post upgrade check COP file it fails

1.1  FAIL      Cluster Database Status (Node authentication and replication status)


When I do a utils dbreplication status it shows

Enterprise Replication not active  (62)
command failed -- unable to connect to server specified  (5)



utils dbreplication runtimestate it says


Cluster Detailed View from CUC-01 (2 Servers):

                                      PING      DB/RPC/   REPL.    Replication    REPLICATION SETUP
SERVER-NAME         IP ADDRESS        (msec)    DbMon?    QUEUE    Group ID       (RTMT) & Details
-----------         ----------        ------    -------   -----    -----------    ------------------
CUC-01           X.X.X.X     0.018     Y/Y/Y     --       (-)            (-) Replication Not Setup
CUC-02           X.X.X.X     0.125     Y/Y/Y     --       (-)            (-) DB-diff


I've attempted to reset replication this way.

https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-connection/116942-technote-uc-00.html


It doesn't seem to be working for me. Replication status always just says not setup

Any ideas?


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220104/031a3ba5/attachment.htm>