[cisco-voip] Outbound CLI based on location

[Mark Turpin]

It is going to be a chore to configure it, but you could do this with device mobility, device-pool driven standard local route groups, and masking on the route list/route group.

LMK if that's enough to get you started or not.
________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of James Dust <james.dust at charles-stanley.co.uk>
Sent: Wednesday, March 9, 2022 1:10 PM
To: cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: [cisco-voip] Outbound CLI based on location


Good evening all,



I am using CUCM 12.5, and all of our users are signing into their desk phones with extension mobility. When the users dial outbound we are sending a standard CLI, which is set via a calling party transform mask.



I now have a need to send a different outbound CLI, based on what location the end user is working from (two different sites, two separate CLI’s)



Is this possible?



Many thanks in advance.



James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220309/bbaeae0b/attachment.htm>