[cisco-voip] Outbound CLI based on location

[Mark Turpin]

Exactly. It's all the same infrastructure just duplicate the SLRG hierarchy for your two device pools. DP for Site A and DP for Site B and the membership to the DP is controlled by the DMI/DMG.

________________________________
From: Lelio Fulgenzi <lelio at uoguelph.ca>
Sent: Wednesday, March 9, 2022 1:27 PM
To: Mark Turpin <mark at 9line911.com>; James Dust <james.dust at charles-stanley.co.uk>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
Subject: RE: Outbound CLI based on location


Mark – this is where you setup ip address ranges for “home” and then other ip address ranges for other stuff right?



They’d be using the same gateways, but just different route patterns to apply the clid?



From: cisco-voip <cisco-voip-bounces at puck.nether.net> On Behalf Of Mark Turpin via cisco-voip
Sent: Wednesday, March 9, 2022 2:22 PM
To: James Dust <james.dust at charles-stanley.co.uk>; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Outbound CLI based on location



CAUTION: This email originated from outside of the University of Guelph. Do not click links or open attachments unless you recognize the sender and know the content is safe. If in doubt, forward suspicious emails to IThelp at uoguelph.ca<mailto:IThelp at uoguelph.ca>



It is going to be a chore to configure it, but you could do this with device mobility, device-pool driven standard local route groups, and masking on the route list/route group.



LMK if that's enough to get you started or not.

________________________________

From: cisco-voip <cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>> on behalf of James Dust <james.dust at charles-stanley.co.uk<mailto:james.dust at charles-stanley.co.uk>>
Sent: Wednesday, March 9, 2022 1:10 PM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> <cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>>
Subject: [cisco-voip] Outbound CLI based on location



Good evening all,



I am using CUCM 12.5, and all of our users are signing into their desk phones with extension mobility. When the users dial outbound we are sending a standard CLI, which is set via a calling party transform mask.



I now have a need to send a different outbound CLI, based on what location the end user is working from (two different sites, two separate CLI’s)



Is this possible?



Many thanks in advance.



James

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220309/4ecabc39/attachment.htm>