[cisco-voip] Outbound CLI based on location

[Scott Shaw]

You could use a combination of Geolocation fields and a LUA script or if
you are connecting to a CUBE you could use SIP manipulations there.

On Wed, Mar 9, 2022 at 2:10 PM James Dust <james.dust at charles-stanley.co.uk>
wrote:

> Good evening all,
>
>
>
> I am using CUCM 12.5, and all of our users are signing into their desk
> phones with extension mobility. When the users dial outbound we are sending
> a standard CLI, which is set via a calling party transform mask.
>
>
>
> I now have a need to send a different outbound CLI, based on what location
> the end user is working from (two different sites, two separate CLI’s)
>
>
>
> Is this possible?
>
>
>
> Many thanks in advance.
>
>
>
> James
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and any
> attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220310/244e242c/attachment.htm>