[cisco-voip] Expressway Clustering...

[Brian V]

A few thoughts.
Clustering does require H323 to be enabled.
Check DNS resolution
if Expressway-E,  you can statically define name resolution for peers in
the case where the defined DNS might not be able to resolve the peers
"inside" address

On Thu, May 12, 2022 at 4:19 PM Jonathan Charles <jonvoip at gmail.com> wrote:

> Howdy!
>
> We are seeing an error on our Expressway E nodes right after we form a
> cluster.
> The cluster is up and fully operational, however, we get:
>
> Peer Not Responding
> A peer address for the LocalZone local zone is down and unreachable.
>
> It then tells you to check the zones page and verify the failing peer
> address...
>
> There are no zones configured, as of yet... just the DefaultZone and it
> has no option for peers to be configured.
>
> The LocalZone also has no peer configuration as an option.
>
> Any ideas?
>
>
> Thanks!
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20220512/6845dda2/attachment.htm>