[cisco-voip] [EXTERNAL] quick question about UCCX license

[Terry Oakley]

Thank you all.   I will restart everything as I have uploaded the new file and the old one is still being displayed.   MAC and counts appear to match identically but will see what happens after the restart.  

 

Terry

 

From: JASON BURWELL <JASON.BURWELL at foundersfcu.com> 
Sent: Tuesday, April 11, 2023 10:40 AM
To: Terry Oakley <Terry.Oakley at rdpolytech.ca>
Cc: voip puck <cisco-voip at puck.nether.net>
Subject: Re: [EXTERNAL] [cisco-voip] quick question about UCCX license

 

	
You don't often get email from jason.burwell at foundersfcu.com <mailto:jason.burwell at foundersfcu.com> . Learn why this is important <https://aka.ms/LearnAboutSenderIdentification> 

	

CAUTION: This email is from an external source. Do not click links or open attachments unless you recognize the sender and know the content is safe.

You should not need to restart but if I were you (out on vacation when the old license expires) I would restart both nodes during a maintenance window to make sure it likes the new license and verify license counts. I’ve had licenses issued before that had incorrect seat and feature counts. It’s very hard to work with Cisco on hard licenses for UCCX now as well. They are forcing everyone to smart licensing. 

 

Jason





On Apr 11, 2023, at 12:07 PM, Terry Oakley <Terry.Oakley at rdpolytech.ca <mailto:Terry.Oakley at rdpolytech.ca> > wrote:

 

We just received an updated license for our UCCX cluster. (On pub one sub). I have loaded the license but want to confirm that to apply the license I need to restart the two VM’s or is there a command line that I can run to apply the 

We just received an updated license for our UCCX cluster.  (On pub one sub).   I have loaded the license but want to confirm that to apply the license I need to restart the two VM’s or is there a command line that I can run to apply the license?   Leaving on vacation in 4 days and the current license expires in 6 days hence the new license to apply and also why I am hoping my mind is mush and I am unsure of required steps.  

 

Thank you in advance for your kind assistance.

 

Terry

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net> 
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20230411/a75b04f5/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4232 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20230411/a75b04f5/attachment.p7s>