<DIV>Hello,</DIV>
<DIV> </DIV>
<DIV>My gateway as5350 has two E1 interface.</DIV>
<DIV>I have defined </DIV>
<DIV>radius-server host zzzz auth-port 1812 acc-port 1813</DIV>
<DIV> </DIV>
<DIV>I work gw-to-gw.</DIV>
<DIV> </DIV>
<DIV>call application voice remote_ip <BR>flash:app_remote_ip_authenticate.2.0.0.tcl<BR></DIV>
<DIV>dial-peer voice 200 voip<BR> permission orig<BR> huntstop<BR> application remote_ip<BR> incoming called-number ^9054T<BR>!<BR>dial-peer voice 1 pots<BR> permission term<BR> huntstop<BR> destination-pattern 9054T<BR> port 3/1:0<BR> forward-digits 11<BR> prefix ,<BR></DIV>
<DIV> </DIV>
<DIV>I terminate calls with GSM channel bank.</DIV>
<DIV> </DIV>
<DIV>controller E1 3/0<BR> ds0-group 0 timeslots 1-15,17-28 type r2-digital<BR></DIV>
<DIV>controller E1 3/1<BR> ds0-group 1 timeslots 1-15,17-28 type r2-digital<BR></DIV>
<DIV>till here all thing is normal. I work properly. But now I want to work with the following scenario:</DIV>
<DIV>
<DIV>I will define two radius with </DIV>
<DIV>aaa group server radius rad1</DIV>
<DIV>server xxxx</DIV>
<DIV>aaa group server radius rad2</DIV>
<DIV>server yyyy</DIV></DIV>
<DIV> </DIV>
<DIV>I want to use rad1 for controller e1 3/0 and rad2 for controller e1 3/1.</DIV>
<DIV>Two different types of call come with prefix 3547#number(to e1 3/0) and 9878#number (to e1 3/1).</DIV>
<DIV> </DIV>
<DIV>But I dont know how can I define rad1 to e1 3/0 and rad2 to e1 3/1. </DIV>
<DIV>I think that I must define rad1 and rad2 to dial-peers separately. But how?</DIV>
<DIV>can you help me,pls?</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV><p>
<hr size=1>Do you Yahoo!?<br>
<a href="http://advision.webevents.yahoo.com/yahoo/votelifeengine/">Vote for the stars of Yahoo!'s next ad campaign!</a>