<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>That's essentially what you do, but I'm not sure about
dial-peers. We just use a route pattern as a catchall that forwards any unknown
calls to the PBX. It's very important to remember a few things:</FONT></DIV>
<UL>
<LI><FONT size=2>The calling search space you assign to the trunks from the
PBX to CCM should not include the partition which has the default route
pattern back to itself. This could result in loops, which would be
bad.</FONT></LI>
<LI><FONT size=2>The PBX has to handle the 'unknown' extensions with either
error tone or message. It can not send unknown extensions to the Call Manager.
Well, it could, as long as you programmed things properly as mentioned above,
but it would be dangerous.</FONT></LI></UL>
<DIV><FONT size=2></FONT> </DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=Scott.Voll@wesd.org href="mailto:Scott.Voll@wesd.org">Voll, Scott</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, July 26, 2004 10:23
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] CMM 6 Pri's</DIV>
<DIV><BR></DIV>Currently I have a configuration of 3 PRI's going into our PBX
and one<BR>PRI from the PBX to My IPT network. Due to the qsig signaling
we have<BR>to run this PRI as a H323 Gateway.<BR><BR>We have just purchased a
CMM and PRI card for our 6509, and would like<BR>to put my IPT network in
front of the PBX. Looking like 3 PRI's coming<BR>in on the CMM (MGCP)
then three PRI's going into the PBX (h323). <BR><BR>So the question; with this
setup do I just make a Dial peer that says<BR>XXXX go to PBX? CM will
route any extensions it knows about (closest<BR>match routing) to the IPT
network and route the rest to the PBX?
<BR><BR>TIA<BR><BR>Scott<BR><BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></BODY></HTML>