<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1476" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>This certainly sounds serious. The best would be to start
looking at the trace files, I know it might take a few minutes but that is your
best bet. The trace will show you the results of the dialed numbers and whether
or not the calling search spaces are still valid.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>A call to the TAC might be in order as well.</FONT></DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=cwhitten@nexband.com href="mailto:cwhitten@nexband.com">Chad
Whitten</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, October 20, 2004 9:54
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] cant dial out
from ip phone</DIV>
<DIV><BR></DIV>apparently this is worse than i had feared, turns out, once a
phone reboots, <BR>it cant dial out, no matter what partition its
in.<BR><BR>On Wednesday 20 October 2004 08:45, Chad Whitten wrote:<BR>> i
came in this morning and found that all phones in one partition could
not<BR>> place outbound calls (to the pstn and to other ip phones within
the same<BR>> partition or other partitions). I get a fast busy as
soon as I hit any<BR>> key.<BR>><BR>> I moved my phone to this
partition in question and observed the same<BR>> behavior. then, I tried
moving my phone back to its normal partition and I<BR>> still could not
place outbound calls, but other phones in that partition<BR>> could.
I then just replaced the phone with another (7940) and still had<BR>> the
same problem.<BR>><BR>> Inbound calls work fine (both from the pstn and
from an ip phone), the<BR>> phone is registered with the
callmanager.<BR>><BR>> I tried just deleting the phone and readding
it. changing the line number,<BR>> etc. nothing
works.<BR><BR>-- <BR>Chad Whitten<BR>Network Administrator<BR>neXband
Communications<BR><A
href="mailto:cwhitten@nexband.com">cwhitten@nexband.com</A><BR>601-944-4801
Phone<BR>601-944-4803
Fax<BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></BODY></HTML>