<br><font size=2 face="sans-serif">Francisco,</font>
<br>
<br><font size=2 face="sans-serif">You say that the phone is new, but from your description it looks to me like the phone has </font>
<br><font size=2 face="sans-serif">already some certificates loaded (CTL). Can you look up Settings>Security Settings and </font>
<br><font size=2 face="sans-serif">see if there is some Hex lines displaying under CTL? If this is the case then you have</font>
<br><font size=2 face="sans-serif">to erase all config on the phone and it should boot up again.</font>
<br><font size=2 face="sans-serif">http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7905g/admin/ccm40/lowptrb.htm#wp1020434</font>
<br>
<br><font size=2 face="sans-serif">From what I've seen the phones (in my case it was a 7940) stop the boot sequence after </font>
<br><font size=2 face="sans-serif">having a mismatch between a previously used TFTP server that must be hidden somewhere</font>
<br><font size=2 face="sans-serif">in the CTL string and the new DHCP advertisement of a different TFTP server. The phone </font>
<br><font size=2 face="sans-serif">keeps looping in DHCP.</font>
<br>
<br><font size=2 face="sans-serif">HTH</font>
<br><font size=2 face="sans-serif">Mat</font>
<br><font size=2 face="sans-serif">---------------------------------------------------------------------------<br>
Matthias Schaerer<br>
Network Engineer<br>
<br>
AnyWeb - your certified Cisco Silver Partner<br>
http://www.anyweb.ch<br>
<br>
AnyWeb-Osys - your certified Cisco Learning Solutions Partner<br>
http://www.anyweb-osys.ch<br>
---------------------------------------------------------------------------</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td>
<td><font size=1 face="sans-serif"><b>Nick Marus <nmarus@gmail.com></b></font>
<br><font size=1 face="sans-serif">Sent by: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">29.10.2004 00:49</font>
<br><font size=1 face="sans-serif">Please respond to Nick Marus</font>
<br>
<td><font size=1 face="Arial"> </font>
<br><font size=1 face="sans-serif"> To: "Faus, Francisco Jose (Francisco)" <faus@lucent.com></font>
<br><font size=1 face="sans-serif"> cc: cisco-voip@puck.nether.net</font>
<br><font size=1 face="sans-serif"> Subject: Re: [cisco-voip] 7905G phone does not boot up</font></table>
<br>
<br>
<br><font size=2><tt>I've had this happen before on some 7905's that are attached to ports<br>
at 100Full. Setting the ports to 100half or back to auto has fixed it<br>
for me.<br>
</tt></font>
<br>
<br><font size=2><tt>On Thu, 28 Oct 2004 14:52:41 +0200, Faus, Francisco Jose (Francisco)<br>
<faus@lucent.com> wrote:<br>
> We have a new 7905G that does not boot up properly and keeps on lightening<br>
> the HOLD (RED) and Menu (Green) buttons while the screen remains blank.<br>
><br>
> I think this happens since the first time we switched it to our LAN to<br>
> register it with CCM (3.3.4) it was accidentally powered off. Maybe this<br>
> corrupted the load or boot image?<br>
><br>
> Using a sniffer I can only see that the phone is continously requesting<br>
> DHCP, receives the IP settings (I have configured a DHCP server to assign<br>
> also the TFTP server address) and broadcasts 3 CDP messages without any<br>
> answer.<br>
><br>
> It doesn't try to TFTP anything either so I don't know whether an image<br>
> reload is still possible.<br>
><br>
> Is this phone recoverable? Any hint?<br>
><br>
> Thanks in advance.<br>
> Francisco<br>
><br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> cisco-voip@puck.nether.net<br>
> https://puck.nether.net/mailman/listinfo/cisco-voip<br>
><br>
</tt></font>
<br>
<br><font size=2><tt>--<br>
Nick Marus<br>
nmarus@gmail.com<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net</tt></font>
<br><font size=2><tt>https://puck.nether.net/mailman/listinfo/cisco-voip</tt></font>
<br>
<br>