<html>
<body>
<dl><br>
</dl>You're half right. It's true that you can't go back to
unsigned loads, but both of these are signed loads. However,
6.0-3 was the first signed load for both CM versions 3.x and
4.x<br><br>
Candace<br><br>
At 03:54 PM 11/23/2004, Hering, Marc wrote:<br>
<blockquote type=cite class=cite cite>I could be wrong,,(usually am) but
isn't the 5.0 loads unsigned and the<br>
6.0 loads signed? IIRC once you put a signed load onto a phone
you<br>
cannot go back to an unsigned load (Again, I could be wrong)<br><br>
<M> <br><br>
-----Original Message-----<br>
From: cisco-voip-bounces@puck.nether.net<br>
[<a href="mailto:cisco-voip-bounces@puck.nether.net" eudora="autourl">mailto:cisco-voip-bounces@puck.nether.net</a>]
On Behalf Of Candace Holman<br>
Sent: Tuesday, November 23, 2004 3:44 PM<br>
To: cisco-voip@puck.nether.net<br>
Subject: [cisco-voip] 7960 firmware load P00306000400<br><br>
I have a phone stuck with firmware load P00306000400 (6.0-3). I set
the<br>
device record in CM (3.3.3) to force it to use P00305000400 (5.0-4)
and<br>
it will not pick up the older load on a reset. There are no errors
in<br>
the status messages on the phone, and no tftp errors on the server.<br>
Does anyone know a workaround?<br><br>
Thanks,<br><br>
=====================================================================<br>
Candace Holman<br><br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
<a href="https://puck.nether.net/mailman/listinfo/cisco-voip" eudora="autourl">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>
<br>
<br>
<br>
<br>
<br>
<br>
<br>
The Gale Company is one of the largest real estate companies in the
industry with a global portfolio exceeding 60 million square feet of
office space. For more information contact 973-301-9500 or visit
<a href="http://www.thegalecompany.com/" eudora="autourl">www.TheGaleCompany.com</a>
<br><br>
<br><br>
</blockquote></body>
</html>