<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-7">
<META content="MSHTML 6.00.2800.1491" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Garamond color=#0000ff>Hi all,</FONT></DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff> i have i
very serious problem in one of fresh ip telephony implementations: when i reset
the phone everything seems to work fine. But when the phone gets unplugged (the
power cord) the port of the switch on which the phone is attached goes down and
only through command line the problem is fixed (i give a "no shut" command in
the interface). I cannot fix the problem through the CMS, since when i give
enable the port does not get enabled!!</FONT></DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff> I have
tried to change the IOS but the same thing happened so i guess it is something
else. </FONT></DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff>DOES anyone has a clue of
what is going on? The customer is going crazy with that cisco bizzare thing!! He
wants to replace them with 3COM switches and i don't know what to tell
him!!</FONT></DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff></FONT> </DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff>P.S. The same thing with
port disabling is happening when an attached laptop for example goes in suspend
mode!! When you logged back, the port is disabled!!</FONT></DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff></FONT> </DIV>
<DIV align=justify><FONT face=Garamond color=#0000ff>Thanks,</FONT></DIV>
<DIV align=justify><FONT face=Garamond
color=#0000ff>Anthony</FONT></DIV></BODY></HTML>