<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=UTF-8">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7232.36">
<TITLE>Re: [cisco-voip] RE:4.1.2 to 3</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Ouch. How do you do most updates/upgrades then?<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net <cisco-voip-bounces@puck.nether.net><BR>
To: Lelio Fulgenzi <lelio@uoguelph.ca>; Brad Waldbauer <Brad@isccorp.net>; cisco-voip@puck.nether.net <cisco-voip@puck.nether.net><BR>
Sent: Thu Apr 07 12:27:41 2005<BR>
Subject: RE: [cisco-voip] RE:4.1.2 to 3<BR>
<BR>
I only have a 1.5 hour window to do this on a pub and a sub. Do you think I can get it done in that time?<BR>
<BR>
<BR>
<BR>
Scott<BR>
<BR>
<BR>
<BR>
________________________________<BR>
<BR>
From: Lelio Fulgenzi [<A HREF="mailto:lelio@uoguelph.ca">mailto:lelio@uoguelph.ca</A>]<BR>
Sent: Thursday, April 07, 2005 9:23 AM<BR>
To: Voll, Scott; Brad Waldbauer; cisco-voip@puck.nether.net<BR>
Subject: Re: [cisco-voip] RE:4.1.2 to 3<BR>
<BR>
<BR>
<BR>
it's a 685MB file which takes a while to decompress. There was one reboot almost immediately after the install started, then i think only one more after the install was done. I can't remember the time it took, i left the box for a while.<BR>
<BR>
<BR>
<BR>
Make sure you have ample free space, at least 4GB.<BR>
<BR>
----- Original Message -----<BR>
<BR>
From: Voll, Scott <<A HREF="mailto:Scott.Voll@wesd.org">mailto:Scott.Voll@wesd.org</A>> <BR>
<BR>
To: Brad Waldbauer <<A HREF="mailto:Brad@isccorp.net">mailto:Brad@isccorp.net</A>> ; cisco-voip@puck.nether.net<BR>
<BR>
Sent: Thursday, April 07, 2005 12:21 PM<BR>
<BR>
Subject: RE: [cisco-voip] RE:4.1.2 to 3<BR>
<BR>
<BR>
<BR>
How long was the .3 upgrade from the .2? how many reboots?<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net<BR>
[<A HREF="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</A>] On Behalf Of Brad Waldbauer<BR>
Sent: Thursday, April 07, 2005 9:17 AM<BR>
To: cisco-voip@puck.nether.net<BR>
Subject: [cisco-voip] RE:4.1.2 to 3<BR>
<BR>
I just did a new install to 4.1.2 and then to .3 and it went fine. I<BR>
just hit the exe and away it went. I'm just starting to program my<BR>
pieces and I haven't had any problems.... yet. LOL.<BR>
<BR>
Brad<BR>
ISC - Information Systems Consulting<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net<BR>
[<A HREF="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</A>] On Behalf Of<BR>
cisco-voip-request@puck.nether.net<BR>
Sent: Thursday, April 07, 2005 06:35 AM<BR>
To: cisco-voip@puck.nether.net<BR>
Subject: cisco-voip Digest, Vol 26, Issue 33<BR>
<BR>
Send cisco-voip mailing list submissions to<BR>
cisco-voip@puck.nether.net<BR>
<BR>
To subscribe or unsubscribe via the World Wide Web, visit<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
or, via email, send a message with subject or body 'help' to<BR>
cisco-voip-request@puck.nether.net<BR>
<BR>
You can reach the person managing the list at<BR>
cisco-voip-owner@puck.nether.net<BR>
<BR>
When replying, please edit your Subject line so it is more specific<BR>
than "Re: Contents of cisco-voip digest..."<BR>
<BR>
<BR>
Today's Topics:<BR>
<BR>
1. 4.1.2 to 3 (Voll, Scott)<BR>
2. can not upgrade lic on cue (james)<BR>
3. Re: AS5400-HPX platform restriction (Jon Lewis)<BR>
4. install ccm 4.12 erroe ( ??? )<BR>
5. IPCC Express 3.1 calls stuck in queue problem<BR>
(Gawie Herholdt (GSP))<BR>
6. : Question about Java programming (Aurelien FACHAUX)<BR>
7. RE: 7. (the BIG mystery) Callmanager Express and ATAfax<BR>
Passthrough (Boda Gy?rgy)<BR>
8. Phone stuck in Forward.. (Tamer Mohamed Bayomy)<BR>
9. Berbee InformaCast (Eric McKinney)<BR>
<BR>
<BR>
----------------------------------------------------------------------<BR>
<BR>
Message: 1<BR>
Date: Wed, 6 Apr 2005 15:51:12 -0700<BR>
From: "Voll, Scott" <Scott.Voll@wesd.org><BR>
Subject: [cisco-voip] 4.1.2 to 3<BR>
To: <cisco-voip@puck.nether.net><BR>
Message-ID: <D713462ED535184D830F6F6301753E7E01511C20@VISHNU.wesd.org><BR>
Content-Type: text/plain; charset="US-ASCII"<BR>
<BR>
Anyone upgrade from 4.1.2 to 4.1.3 yet? The PDF attached is really<BR>
designed for 4.0 and 3.3 to 4.1 so I'm looking for a better doc. Do I<BR>
just need to install it like a SR?<BR>
<BR>
Thanks for any input.<BR>
<BR>
Scott<BR>
<BR>
<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 2<BR>
Date: Tue, 5 Apr 2005 20:21:33 -0400<BR>
From: "james" <jgrace@digitelusa.net><BR>
Subject: [cisco-voip] can not upgrade lic on cue<BR>
To: <cisco-voip@puck.nether.net><BR>
Message-ID: <000201c53afc$8e6a2de0$320d020a@digitelcorp.com><BR>
Content-Type: text/plain; charset="iso-8859-1"<BR>
<BR>
I having a problem with upgrading the lic pkg on my cue nm . i was fine<BR>
with the software upgrade. and unity is working at this time. but cue<BR>
will not take the lic pkg file. the ftp transfer goes fine and<BR>
completes. i reload and nothing, it still have the same 12 mailboxs. im<BR>
trying to up grade to a 100mb pkg. i call tac in on it and ive had no<BR>
luck....<BR>
<BR>
James Grace<BR>
System Engineer /Professional Srvc.<BR>
MCSE MCSA MCDBA CCNA CCNP CQS<BR>
<BR>
-------------- next part --------------<BR>
An HTML attachment was scrubbed...<BR>
URL:<BR>
<A HREF="https://puck.nether.net/pipermail/cisco-voip/attachments/20050406/96ffc1">https://puck.nether.net/pipermail/cisco-voip/attachments/20050406/96ffc1</A><BR>
38/attachment-0001.html<BR>
<BR>
------------------------------<BR>
<BR>
Message: 3<BR>
Date: Wed, 6 Apr 2005 23:12:18 -0400 (EDT)<BR>
From: Jon Lewis <jlewis@lewis.org><BR>
Subject: Re: [cisco-voip] AS5400-HPX platform restriction<BR>
To: Ryan Fields <jryan.fields@gmail.com><BR>
Cc: cisco-voip@puck.nether.net<BR>
Message-ID: <Pine.LNX.4.58.0504062305030.12430@web1.mmaero.com><BR>
Content-Type: TEXT/PLAIN; charset=US-ASCII<BR>
<BR>
On Wed, 6 Apr 2005, Ryan Fields wrote:<BR>
<BR>
> We are currently running voip service using an AS5400-HPX<BR>
> and would like to have off-ramp faxing as well. I did a couple<BR>
> of tries of having both voice calls and off-ramp process at the<BR>
> same time. So far its working fine but to be on the safe side<BR>
> and not degrade its performance, I'd like to find its platform<BR>
> restrictions. How can I verify the maximum simultaneous<BR>
<BR>
AFAIK, cisco does not publicly release such specs. I had a customer<BR>
trying to do fax broadcasting with a AS5400-HPX about year and a half<BR>
ago.<BR>
You might find something in the cisco-nas archive around Aug 2003...but<BR>
off the top of my head, I think we got up to somewhere around 150<BR>
simultaneous outgoing faxes, but that was with the box doing absolutely<BR>
nothing else (other than the occasional crash), dedicating all its CPU<BR>
to<BR>
faxing. I wouldn't expect it to do reasonable VOIP quality with<BR>
anywhere<BR>
near that number of faxes going on at the same time.<BR>
<BR>
----------------------------------------------------------------------<BR>
Jon Lewis | I route<BR>
Senior Network Engineer | therefore you are<BR>
Atlantic Net |<BR>
_________ <A HREF="http://www.lewis.org/~jlewis/pgp">http://www.lewis.org/~jlewis/pgp</A> for PGP public key_________<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 4<BR>
Date: Thu, 7 Apr 2005 13:59:36 +0800 (CST)<BR>
From: " ??? " <jianghb@netease.com><BR>
Subject: [cisco-voip] install ccm 4.12 erroe<BR>
To: cisco-voip@puck.nether.net<BR>
Message-ID: <4254CC43.000019.10977@m217.mail.netease.com><BR>
Content-Type: text/plain; charset="gb2312"<BR>
<BR>
04/08/2005 14:13:02.326 CCMSetup.cpp fnrsPreinstall iuRunCommand:<BR>
szCmd_ = "C:\utils\shutdown.exe" /L /R /Y /T:0<BR>
04/08/2005 14:13:02.876 CCMSetup.cpp fnrsPreinstall CreateProcess:<BR>
Error: 3: The system cannot find the path specified.<BR>
<BR>
04/08/2005 14:12:58.019 CCMSetup.cpp fnrsInitialize Did not find<BR>
file: "C:\DOCUME~1\ADMINI~1.CCM\LOCALS~1\CCMServices.ctl"<BR>
04/08/2005 14:12:58.019 CCMSetup.cpp fnrsInitialize FindFirstFile:<BR>
Error: 2: The system cannot find the file specified.<BR>
<BR>
WHO???<BR>
<BR>
<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 5<BR>
Date: Thu, 7 Apr 2005 10:17:42 +0200<BR>
From: "Gawie Herholdt \(GSP\)" <herholgs@telkom.co.za><BR>
Subject: [cisco-voip] IPCC Express 3.1 calls stuck in queue problem<BR>
To: <cisco-voip@puck.nether.net><BR>
Message-ID:<BR>
<BR>
<4561B54D504B79499D37BB32C86A67FE01C75411@CNTRRA20-XCS00.telkom.co.za><BR>
Content-Type: text/plain; charset="us-ascii"<BR>
<BR>
<BR>
Hi<BR>
<BR>
<BR>
<BR>
I have a problem with a 3.1(2) IPCC Express system where 1 call is<BR>
stuck in the queue for more than 3 hours now. The system works fine -<BR>
all incoming calls are being queued / de-queued but just this one call<BR>
is stuck in the queue. Is there a way to clear this call without<BR>
restarting the engine? I have about 6 call center groups on there and<BR>
do not want to affect all of them.<BR>
<BR>
<BR>
<BR>
Thanks<BR>
<BR>
Gawie<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
Thanks and regards,<BR>
<BR>
Gawie Herholdt<BR>
<BR>
Snr Network Specialist, CCIE 7668 (R&S)<BR>
<BR>
Telkom SA (Pty) Ltd<BR>
<BR>
27-84-607-7371 (Mobile)<BR>
<BR>
27-12-680-7991 (IP Phone)<BR>
<BR>
27-12-680-0028 (Fax)<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
==================================================================<BR>
This e-mail and its contents are subject to the Telkom SA Limited<BR>
e-mail legal notice available at<BR>
<A HREF="http://www.telkom.co.za/TelkomEMailLegalNotice.PDF">http://www.telkom.co.za/TelkomEMailLegalNotice.PDF</A><BR>
-------------- next part --------------<BR>
An HTML attachment was scrubbed...<BR>
URL:<BR>
<A HREF="https://puck.nether.net/pipermail/cisco-voip/attachments/20050407/309e42">https://puck.nether.net/pipermail/cisco-voip/attachments/20050407/309e42</A><BR>
cb/attachment-0001.html<BR>
<BR>
------------------------------<BR>
<BR>
Message: 6<BR>
Date: Thu, 07 Apr 2005 10:19:48 +0200<BR>
From: "Aurelien FACHAUX" <aurelienfachaux@hotmail.com><BR>
Subject: [cisco-voip] : Question about Java programming<BR>
To: cisco-voip@puck.nether.net<BR>
Message-ID: <BAY106-F13A7D90921846C9D7934C2A23E0@phx.gbl><BR>
Content-Type: text/plain; charset=iso-8859-1; format=flowed<BR>
<BR>
Hi everybody,<BR>
<BR>
I have a real problem with the CISCOIPPHONESTATUS AXL tag... In fact, I<BR>
want<BR>
to know if it exists a way to use it with Java in order to implement an<BR>
interface with JTAPI...<BR>
<BR>
I need to generate a call and to display caller informations on IP PHONE<BR>
<BR>
screen.<BR>
<BR>
If you have some sourcecode or advice, don't hesitate ton contact me.<BR>
<BR>
Best regards.<BR>
<BR>
Aur?lien.<BR>
<BR>
_________________________________________________________________<BR>
Ne cherchez plus, trouvez ! Avec le nouveau MSN Search.<BR>
<A HREF="http://search.msn.fr/">http://search.msn.fr/</A><BR>
<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 7<BR>
Date: Thu, 7 Apr 2005 10:41:51 +0200<BR>
From: Boda Gy?rgy <gyorgy.boda@nextiraone.hu><BR>
Subject: RE: [cisco-voip] 7. (the BIG mystery) Callmanager Express and<BR>
ATAfax Passthrough<BR>
To: "Andre Beck" <cisco-voip@ibh.net>, <cisco-voip@puck.nether.net><BR>
Message-ID:<BR>
<BR>
<F3CFD039AAEB4244B1FE1F48B2821A16116B3D@aebserver01.alcatel-ebs.intra><BR>
Content-Type: text/plain; charset="iso-8859-1"<BR>
<BR>
ATA to GK registration:<BR>
<BR>
configure via ATA's web page<BR>
GK= 21.3.3.3<BR>
GKID=<zone name><BR>
AutMethod = 0x00000004<BR>
PWD0 = 1#<BR>
AudioMode=0x00150015 for fax pass thru<BR>
[even though you will see stars, just type 1# in this field]<BR>
UID0 = 3003 <DN><BR>
LBR = 3 for G729<BR>
<BR>
Regs,<BR>
<BR>
Gy?rgy Boda<BR>
<BR>
-----Original Message-----<BR>
From: Andre Beck [<A HREF="mailto:cisco-voip@ibh.net">mailto:cisco-voip@ibh.net</A>]<BR>
Sent: 2005. ?prilis 6. 18:16<BR>
To: cisco-voip@puck.nether.net<BR>
Subject: Re: [cisco-voip] 7. (the BIG mystery) Callmanager Express and<BR>
ATAfax Passthrough<BR>
<BR>
On Sat, Apr 02, 2005 at 06:43:09PM +0200, Lasse Christiansen wrote:<BR>
><BR>
> I've really been confused as to Cisco's recommendations on the ATA.<BR>
> I've seen H.323 specified on CCO while a Cisco SE advised me to use<BR>
> SCCP.<BR>
<BR>
There has been lengthy discussion on this list regarding the issues of<BR>
faxing vs. ATAs. I have no first hand experience yet (coming soon), but<BR>
AFAIK it should work with skinny as long as you tweak the ATA correctly.<BR>
You have to set at least one bit mask in the device so it forcibly talks<BR>
G.711u/a. I've tested this only briefly and against a CCM, but CCME is<BR>
on the agenda.<BR>
<BR>
> Have anyone tried registering CME DN's with a GK ?<BR>
<BR>
Yes, works out of the box. If subscribed to a GK CCME registers all its<BR>
EPhone-DNs at the GK. Together with a RAS dialpeer you can easily<BR>
distri-<BR>
bute DNs dynamically over a cloud of CCMEs and dial to every of them,<BR>
the<BR>
closesed thing to dynamic call routig I've found so far.<BR>
<BR>
> and also registering ATA's with a GK ?<BR>
<BR>
With Skinny they are just ephones so it works out of the box. I don't<BR>
know how they would register in H.323 mode, though - they should<BR>
register<BR>
themselves then, needing correct config for it, if that's at all<BR>
possible.<BR>
<BR>
> I've created Service Provider setup's with ATA's running SIP. But in<BR>
> this scenario it looks like H.323 would be the right choice for the<BR>
CME<BR>
> solution.<BR>
<BR>
Only if you absolutely don't get it running with Skinny. If there are<BR>
any known bugs which reliably prevent this and have no known and/or<BR>
acceptable workarounds, I'd like to know more about them as well.<BR>
Sales dropped in ATAs because they are cheaper than VWIC-*FXS and I've<BR>
got to deal with it :-/<BR>
<BR>
HTH,<BR>
Andre.<BR>
--<BR>
The _S_anta _C_laus _O_peration<BR>
or "how to turn a complete illusion into a neverending money source"<BR>
<BR>
-> Andre Beck +++ ABP-RIPE +++ IBH Prof. Dr. Horn GmbH, Dresden <-<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
<BR>
<BR>
<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 8<BR>
Date: Thu, 7 Apr 2005 14:02:34 +0200<BR>
From: "Tamer Mohamed Bayomy" <tamer.bayomy@xceedcc.com><BR>
Subject: [cisco-voip] Phone stuck in Forward..<BR>
To: <cisco-voip@puck.nether.net><BR>
Message-ID:<BR>
<BR>
<72C99EF734F5AA449E45D132B979D1D901642875@XCEEDMAIL.Masreya.local><BR>
Content-Type: text/plain; charset="us-ascii"<BR>
<BR>
Dear All,<BR>
<BR>
I have a weird problem with one of Cisco IP phone 7940 that is<BR>
registered in<BR>
CCM 4, the user using this IP phone once made forward to another Cisco<BR>
IP phone 7940 then he wanted to cancel this forward he is unsuccessful,<BR>
can anyone help with this problem as I even deleted the 2nd phone and<BR>
still the 1st phone still forwarding the calls can't stop this<BR>
forward?!!!<BR>
<BR>
Any help?!!<BR>
Regards..<BR>
<BR>
<BR>
<BR>
<BR>
------------------------------<BR>
<BR>
Message: 9<BR>
Date: Thu, 7 Apr 2005 08:40:42 -0400<BR>
From: "Eric McKinney" <emckinney@fuquay-varina.org><BR>
Subject: [cisco-voip] Berbee InformaCast<BR>
To: <cisco-voip@puck.nether.net><BR>
Message-ID: <200504071234.j37CYnUc072188@puck.nether.net><BR>
Content-Type: text/plain; charset="us-ascii"<BR>
<BR>
We are looking at putting in Berbee's InformaCast for paging, has anyone<BR>
used this? Looking to get any pro's or con's on it.<BR>
<BR>
<BR>
<BR>
Thanks,<BR>
<BR>
<BR>
<BR>
Eric<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
-------------- next part --------------<BR>
An HTML attachment was scrubbed...<BR>
URL:<BR>
<A HREF="https://puck.nether.net/pipermail/cisco-voip/attachments/20050407/445605">https://puck.nether.net/pipermail/cisco-voip/attachments/20050407/445605</A><BR>
56/attachment.html<BR>
<BR>
------------------------------<BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
<BR>
<BR>
End of cisco-voip Digest, Vol 26, Issue 33<BR>
******************************************<BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
<BR>
</FONT>
</P>
</BODY>
</HTML>