<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4937.800" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=443112614-12042005><FONT face=Arial color=#0000ff size=2>only
other one that i've come that affected media cut through was 'voice call
send-alert'. But all of these were pre-SIP stack as far as I can
tell.</FONT></SPAN></DIV>
<DIV><SPAN class=443112614-12042005><FONT face=Arial color=#0000ff
size=2></FONT></SPAN> </DIV>
<DIV><SPAN class=443112614-12042005><FONT face=Arial color=#0000ff
size=2>/Wes</FONT></SPAN></DIV>
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B>
cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net]<B>On Behalf Of </B>Karl
Smith<BR><B>Sent:</B> Tuesday, April 12, 2005 10:20 AM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> [cisco-voip] Early
media<BR><BR></FONT></DIV>
<DIV>
<DIV>Hi,</DIV>
<DIV> </DIV>
<DIV>thanks a lot for your help, but unfortunately the rtp send-recv did
not solve the problem. I have also upgraded the IOS but still no success.</DIV>
<DIV> </DIV>
<DIV>Any other ideas??</DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV> </DIV>
<DIV>Carmelo</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>From: "Teodor Georgiev" <<A
href="mailto:tgeorgiev@is-bg.net">tgeorgiev@is-bg.net</A>></DIV>
<DIV>To: <<A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A>></DIV>
<DIV>Sent: Tuesday, April 12, 2005 15:42</DIV>
<DIV>Subject: Re: [cisco-voip] Early media</DIV>
<DIV><BR></DIV>> <BR>> <BR>> voice rtp send-recv<BR>> <BR>> issue
that command in global configuration mode. It shall solve your problem.<BR>>
The issue you have described below is an usual behaviour - the reverse <BR>>
"bearer" path won't be opened until a CONNECT message is received.<BR>>
<BR>> <BR>> <BR>> On Tuesday 12 April 2005 11:40, Karl Smith
wrote:<BR>> > Hi,<BR>> ><BR>> > I am using a 2610 as a sip to
isdn gateway. It appears that there is an<BR>> > issue with early media.
When the gateway receives rtp in early media on the<BR>> > ip side it does
not switch it through on the isdn bearer channel. Hence if<BR>> > any
announcements or tones are provided on a media server just after the<BR>>
> 183 session progress and before the 200 OK, these cannot be heard on
the<BR>> > ISDN side.<BR>> ><BR>> > This problem does not
exist in the reverse direction; i.e. if an<BR>> > anno! uncement is
available on the isdn side before the connect message, the<BR>> > gateway
will swith it on an rtp stream and sends it to the ua.<BR>> ><BR>> >
The IOS image that I am using is the c2600-is3x-mz.123-6b.bin<BR>>
><BR>> > Does any one knows whether this problem was resolved in more
recent<BR>> > releases? If yes, any ideas which release?<BR>>
><BR>> > Thanks and regards,<BR>> ><BR>> > Carmelo<BR>>
><BR>> ><BR>> ><BR>> > Send instant messages to your online
friends <A
href="http://uk.messenger.yahoo.com">http://uk.messenger.yahoo.com</A><BR>>
_______________________________________________<BR>> cisco-voip mailing
list<BR>> <A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR>>
<A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></DIV>
<P>Send instant messages to your online friends http://uk.messenger.yahoo.com
</P></BODY></HTML>