<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1498" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<H3 class=p_H_Head2><FONT face=Arial size=2>from </FONT><A
href="http://www.cisco.com/en/US/customer/products/sw/voicesw/ps556/products_installation_guide_chapter09186a00803fd70b.html#wp1063972"><FONT
face=Arial size=2>Upgrading Your Cisco CallManager (If You Are Not Replacing
Hardware)</FONT></A></H3>
<H3 class=p_H_Head2><FONT face=Arial size=2>
<HR>
</FONT></H3>
<H3 class=p_H_Head2><FONT face=Arial size=2>Removing a Drive, Inserting a
Replacement Drive, and Drive Mirroring (Strongly Recommended) </FONT></H3><A
name=wp1064180></A>
<P class=pBl_BlockLabel><FONT face=Arial size=2>Item Needed: Newly Purchased
Hard Drive </FONT></P><A name=wp1064181></A>
<P class=pB1_Body1><FONT face=Arial size=2>You cannot remove a drive if you have
the MCS-7815, MCS-7820, MCS-7822, MCS-7825, or the customer-provided IBM xSeries
330 server. </FONT></P><A name=wp1064182></A>
<P class=pB1_Body1><FONT face=Arial size=2>After you verify that you have a good
backup of the data, you can remove a drive to save configured data; however, you
must insert a replacement drive into the server before you begin the operating
system procedures. This task may require that you purchase a new drive.
</FONT></P><A name=wp1064183></A>
<P class=pB1_Body1><FONT face=Arial size=2>This process may take between 30
minutes to 60 minutes, depending on the size of the drive. </FONT></P><A
name=wp1064184></A>
<P class=pB1_Body1><FONT face=Arial size=2>Perform the following steps to remove
a drive, to insert a replacement drive, and to mirror the drives: </FONT></P>
<P class=pB1_Body1><FONT face=Arial size=2>
<HR>
</FONT></P>
<P class=pB1_Body1><FONT face=Arial size=2></FONT> </P></DIV>
<DIV>-----
-----<BR>Lelio Fulgenzi,
B.A.
<A href="mailto:lelio@uoguelph.ca.eh">lelio@uoguelph.ca.eh</A><BR>Network
Analyst (CCS)<BR>University of
Guelph
FAX:(519) 767-1060 JNHN<BR>Guelph, Ontario N1G
2W1
TEL:(519) 824-4120
x56354<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^<BR>mob
lawyer: your people insulted my brother.<BR>dr. house: what? romano in the
parmesan cheese shaker again?</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=rogerssa@hscast.com href="mailto:rogerssa@hscast.com">Shane
Rogers</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, April 22, 2005 7:29
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] IBM 345 and
upgrade</DIV>
<DIV><BR></DIV>Anyone had any issues with the IBM 345 mirrored
drives?<BR><BR>I pulled one drive out before I do my 3.3.x to 4.1 upgrade.
Just incase something goes wrong. Then I started the server back up
chose F10 on the error saying it saw the mirror was broken but I want to
continue without any changes. Well it then only wants to boot to the
floppy drive. I'm at a loss here.
Anyone?<BR><BR>Shane<BR><BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE></BODY></HTML>