<br><font size=2 face="sans-serif">Hello,</font>
<br><font size=2 face="sans-serif">I try to configure a Cisco 2811 with
VIC2-2BRI-NT/TE and a PVDM2-16 to act as gateway between our CCM and our
PBX.</font>
<br><font size=2 face="sans-serif">We had a test-equipment in July 2000
for 6 months with 2600 and a CCM 3.00, and it worked with the following
config (see below).</font>
<br><font size=2 face="sans-serif">Now I tried to get the 2811 working
with a new CCM 4.1, I know it is a different config, but no success, and
after hours and hours of </font>
<br><font size=2 face="sans-serif">reading, I don't know any further...
I think I read every single CCO-Document ;-).</font>
<br>
<br><font size=2 face="sans-serif">When I turn on a "debug isdn q931"
I can see that an IP-Phone-Call (8200-->1234) reaches the router, </font>
<br><font size=2 face="sans-serif">but will not be forwarded to the PBX
(Cause i = 0x85B2 - Requested facility not subscribed).</font>
<br><font size=2 face="sans-serif">When I call an IP-Phone (8200) from
the PBX (1234), the call reaches the router, but will not be forwarded
</font>
<br><font size=2 face="sans-serif">to the CCM (Cause i = 0x80A2 - No circuit/channel
available). Debugs see below.</font>
<br>
<br><font size=2 face="sans-serif">We have a CCIE-Voice-Consultant here
to help us next week, but I want to get this work, that I can play around
a little bit.</font>
<br><font size=2 face="sans-serif">The rest works fine, CCM 4.1, 7912,
7940, 7960 with 7914, ATA with analog phone, SRST-Fallback, Phone Services,
</font>
<br><font size=2 face="sans-serif">Global Directory and all the stuff,
but this router.....</font>
<br>
<br><font size=2 face="sans-serif">Sorry for the "newbie"-question,
maybe you can help me or point me to a newbie-discussion/forum.</font>
<br>
<br><font size=2 face="sans-serif">Thanks in advance and have a nice weekend,</font>
<br><font size=2 face="sans-serif">HP</font>
<br>
<br>
<br><font size=2 face="sans-serif">============= Config from July 2000
===================================</font>
<br><font size=2 face="sans-serif">voice-port 1/0/0</font>
<br><font size=2 face="sans-serif"> input gain -6</font>
<br><font size=2 face="sans-serif"> cptone DE</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-port 1/0/1</font>
<br><font size=2 face="sans-serif"> input gain -6</font>
<br><font size=2 face="sans-serif"> cptone DE</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 2 voip</font>
<br><font size=2 face="sans-serif"> destination-pattern .</font>
<br><font size=2 face="sans-serif"> codec g711alaw</font>
<br><font size=2 face="sans-serif"> no vad</font>
<br><font size=2 face="sans-serif"> session target ipv4:10.200.112.10</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 10 pots</font>
<br><font size=2 face="sans-serif"> destination-pattern .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 1/0/0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 11 pots</font>
<br><font size=2 face="sans-serif"> destination-pattern .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 1/0/1</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">gateway</font>
<br>
<br><font size=2 face="sans-serif">============= IP-Phone -8200 -->
PBX-Phone -1234: =============================</font>
<br>
<br><font size=2 face="sans-serif"> Bearer Capability
i = 0x8090A2 </font>
<br><font size=2 face="sans-serif">
Standard = CCITT </font>
<br><font size=2 face="sans-serif">
Transfer Capability = Speech </font>
<br><font size=2 face="sans-serif">
Transfer Mode = Circuit </font>
<br><font size=2 face="sans-serif">
Transfer Rate = 64 kbit/s </font>
<br><font size=2 face="sans-serif"> Channel
ID i = 0x81 </font>
<br><font size=2 face="sans-serif"> Calling
Party Number i = 0x0081, '8200' </font>
<br><font size=2 face="sans-serif">
Plan:Unknown, Type:Unknown </font>
<br><font size=2 face="sans-serif"> Called Party
Number i = 0x80, '1234' </font>
<br><font size=2 face="sans-serif">
Plan:Unknown, Type:Unknown</font>
<br><font size=2 face="sans-serif">Sep 9 17:16:55.964: ISDN BR0/0/0
Q931: RX <- CALL_PROC pd = 8 callref = 0x8D </font>
<br><font size=2 face="sans-serif"> Channel
ID i = 0x89</font>
<br><font size=2 face="sans-serif">Sep 9 17:16:56.016: ISDN BR0/0/0
Q931: RX <- DISCONNECT pd = 8 callref = 0x8D </font>
<br><font size=2 face="sans-serif"> Cause i
= 0x85B2 - Requested facility not subscribed</font>
<br>
<br><font size=2 face="sans-serif">=============PBX-Phone -1234 -->
IP-Phone -8200 =============================</font>
<br>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.300: ISDN BR0/0/0
**ERROR**: host_information: Unexpected INFO - call id 0x8010</font>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.340: ISDN BR0/0/1
Q931: RX <- SETUP pd = 8 callref = 0x2C </font>
<br><font size=2 face="sans-serif"> Bearer Capability
i = 0x8890 </font>
<br><font size=2 face="sans-serif">
Standard = CCITT </font>
<br><font size=2 face="sans-serif">
Transfer Capability = Unrestricted Digital </font>
<br><font size=2 face="sans-serif">
Transfer Mode = Circuit </font>
<br><font size=2 face="sans-serif">
Transfer Rate = 64 kbit/s </font>
<br><font size=2 face="sans-serif"> Channel
ID i = 0x8A </font>
<br><font size=2 face="sans-serif"> Calling
Party Number i = 0x0080, '1234' </font>
<br><font size=2 face="sans-serif">
Plan:Unknown, Type:Unknown </font>
<br><font size=2 face="sans-serif"> Called Party
Number i = 0x80, '8200' </font>
<br><font size=2 face="sans-serif">
Plan:Unknown, Type:Unknown</font>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.360: ISDN BR0/0/1
Q931: TX -> CALL_PROC pd = 8 callref = 0xAC </font>
<br><font size=2 face="sans-serif"> Channel
ID i = 0x8A</font>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.368: ISDN BR0/0/0
Q931: Applying typeplan for sw-type 0x1 is 0x0 0x0, Calling num 1234</font>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.368: ISDN BR0/0/0
**ERROR**: CC_CHAN_GetIdleChanbri: All channels busy</font>
<br><font size=2 face="sans-serif">Sep 9 17:17:48.392: ISDN BR0/0/1
Q931: TX -> DISCONNECT pd = 8 callref = 0xAC </font>
<br><font size=2 face="sans-serif"> Cause i
= 0x80A2 - No circuit/channel available</font>
<br>
<br>
<br>
<br><font size=2 face="sans-serif">============= Config 2811tdsvoip1 =======================================</font>
<br>
<br><font size=2 face="sans-serif">version 12.4</font>
<br><font size=2 face="sans-serif">service timestamps debug datetime msec</font>
<br><font size=2 face="sans-serif">service timestamps log datetime msec</font>
<br><font size=2 face="sans-serif">no service password-encryption</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">hostname 2811tdsvoip1</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">boot-start-marker</font>
<br><font size=2 face="sans-serif">boot system flash c2800nm-ipvoicek9-mz.124-3.bin</font>
<br><font size=2 face="sans-serif">boot-end-marker</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">logging buffered 10000 debugging</font>
<br><font size=2 face="sans-serif">enable secret 5 $1$Yzkh$43RdMyrIkzoUSXl.EfzGN0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">aaa new-model</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">aaa authentication login default group
tacacs+ enable</font>
<br><font size=2 face="sans-serif">aaa authentication enable default group
tacacs+ enable</font>
<br><font size=2 face="sans-serif">aaa accounting commands 15 default start-stop
group tacacs+</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">aaa session-id common</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">resource policy</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">clock timezone MET 1</font>
<br><font size=2 face="sans-serif">clock summer-time MESZ recurring last
Sun Mar 2:00 last Sun Oct 3:00</font>
<br><font size=2 face="sans-serif">network-clock-participate wic 0 </font>
<br><font size=2 face="sans-serif">network-clock-participate wic 1 </font>
<br><font size=2 face="sans-serif">ip subnet-zero</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">ip cef</font>
<br><font size=2 face="sans-serif">no ip dhcp use vrf connected</font>
<br><font size=2 face="sans-serif">ip dhcp excluded-address 10.200.0.1
10.200.0.9</font>
<br><font size=2 face="sans-serif">ip dhcp ping packets 5</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">ip dhcp pool VOIP</font>
<br><font size=2 face="sans-serif"> network 10.200.0.0 255.255.252.0</font>
<br><font size=2 face="sans-serif"> dns-server XXX</font>
<br><font size=2 face="sans-serif"> domain-name tds.de</font>
<br><font size=2 face="sans-serif"> default-router 10.200.0.1
</font>
<br><font size=2 face="sans-serif"> option 150 ip 10.200.210.180
</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">no ip domain lookup</font>
<br><font size=2 face="sans-serif">isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-card 0</font>
<br><font size=2 face="sans-serif"> dspfarm</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface Loopback0</font>
<br><font size=2 face="sans-serif"> description Management-Interface
2811tdsvoip1</font>
<br><font size=2 face="sans-serif"> ip address 10.128.16.14 255.255.255.255</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface FastEthernet0/0</font>
<br><font size=2 face="sans-serif"> description Test-VLAN YY</font>
<br><font size=2 face="sans-serif"> ip address 10.200.210.66 255.255.255.0</font>
<br><font size=2 face="sans-serif"> duplex full</font>
<br><font size=2 face="sans-serif"> speed 100</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface FastEthernet0/1</font>
<br><font size=2 face="sans-serif"> description VLAN XX - VoIP-Telefone</font>
<br><font size=2 face="sans-serif"> ip address 10.200.0.1 255.255.252.0</font>
<br><font size=2 face="sans-serif"> duplex full</font>
<br><font size=2 face="sans-serif"> speed 100</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface BRI0/0/0</font>
<br><font size=2 face="sans-serif"> no ip address</font>
<br><font size=2 face="sans-serif"> isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif"> isdn point-to-point-setup</font>
<br><font size=2 face="sans-serif"> isdn incoming-voice voice</font>
<br><font size=2 face="sans-serif"> isdn static-tei 0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface BRI0/0/1</font>
<br><font size=2 face="sans-serif"> no ip address</font>
<br><font size=2 face="sans-serif"> isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif"> isdn point-to-point-setup</font>
<br><font size=2 face="sans-serif"> isdn incoming-voice voice</font>
<br><font size=2 face="sans-serif"> isdn static-tei 0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface BRI0/1/0</font>
<br><font size=2 face="sans-serif"> no ip address</font>
<br><font size=2 face="sans-serif"> isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif"> isdn point-to-point-setup</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface BRI0/1/1</font>
<br><font size=2 face="sans-serif"> no ip address</font>
<br><font size=2 face="sans-serif"> isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif"> isdn point-to-point-setup</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">interface BRI0/3/0</font>
<br><font size=2 face="sans-serif"> no ip address</font>
<br><font size=2 face="sans-serif"> isdn switch-type basic-net3</font>
<br><font size=2 face="sans-serif"> isdn point-to-point-setup</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">ip classless</font>
<br><font size=2 face="sans-serif">ip route 0.0.0.0 0.0.0.0 10.200.210.1</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">ip http server</font>
<br><font size=2 face="sans-serif">no ip http secure-server</font>
<br><font size=2 face="sans-serif">ip tacacs source-interface Loopback0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">access-list 100 deny ip any host
10.200.210.180</font>
<br><font size=2 face="sans-serif">access-list 100 permit ip any any</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">tacacs-server host XXX</font>
<br><font size=2 face="sans-serif">tacacs-server host XXX</font>
<br><font size=2 face="sans-serif">tacacs-server directed-request</font>
<br><font size=2 face="sans-serif">tacacs-server key 7 XXX</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">control-plane</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-port 0/0/0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-port 0/0/1</font>
<br><font size=2 face="sans-serif"> input gain -6</font>
<br><font size=2 face="sans-serif"> cptone DE</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-port 0/1/0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">voice-port 0/1/1</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 2 voip</font>
<br><font size=2 face="sans-serif"> description Weiterleitung von
TK zu Callmanager</font>
<br><font size=2 face="sans-serif"> destination-pattern 8200</font>
<br><font size=2 face="sans-serif"> session target ipv4:10.200.210.180</font>
<br><font size=2 face="sans-serif"> codec g711ulaw</font>
<br><font size=2 face="sans-serif"> no vad</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">dial-peer voice 10 pots</font>
<br><font size=2 face="sans-serif"> destination-pattern .</font>
<br><font size=2 face="sans-serif"> direct-inward-dial</font>
<br><font size=2 face="sans-serif"> port 0/0/0</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">gateway </font>
<br><font size=2 face="sans-serif"> timer receive-rtp 1200</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">call-manager-fallback</font>
<br><font size=2 face="sans-serif"> max-conferences 8 gain -6</font>
<br><font size=2 face="sans-serif"> ip source-address 10.128.16.14
port 2000</font>
<br><font size=2 face="sans-serif"> max-ephones 42</font>
<br><font size=2 face="sans-serif"> max-dn 144</font>
<br><font size=2 face="sans-serif"> system message primary Server
TDS NSU nicht erreichbar</font>
<br><font size=2 face="sans-serif"> system message secondary Backupmodus</font>
<br><font size=2 face="sans-serif"> time-zone 28</font>
<br><font size=2 face="sans-serif"> time-format 24</font>
<br><font size=2 face="sans-serif"> date-format dd-mm-yy</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">alias exec dhcp1 sh ip dhcp binding
</font>
<br><font size=2 face="sans-serif">alias exec dhcp2 sh ip dhcp pool</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">line con 0</font>
<br><font size=2 face="sans-serif">line aux 0</font>
<br><font size=2 face="sans-serif">line vty 0 4</font>
<br><font size=2 face="sans-serif"> exec-timeout 0 0</font>
<br><font size=2 face="sans-serif">line vty 5 20</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">warm-reboot</font>
<br><font size=2 face="sans-serif">scheduler allocate 20000 1000</font>
<br><font size=2 face="sans-serif">ntp clock-period 17208792</font>
<br><font size=2 face="sans-serif">ntp source Loopback0</font>
<br><font size=2 face="sans-serif">ntp access-group peer 30</font>
<br><font size=2 face="sans-serif">ntp server XX</font>
<br><font size=2 face="sans-serif">ntp server XX</font>
<br><font size=2 face="sans-serif">!</font>
<br><font size=2 face="sans-serif">end</font>
<br>
<br>
<br>
<br>
<br>