<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1498" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>not sure if this helps at all, but I have the same 
symptoms when I connect a PRI to a Nortel. The fix is to use the hidden command 
"isdn flip-chan-flag" on the interface. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Hope this helps!</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT>&nbsp;</DIV>
<DIV>&nbsp;</DIV>
<BLOCKQUOTE 
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
  <A title=Hans-Peter.Walter@tds.de 
  href="mailto:Hans-Peter.Walter@tds.de">Hans-Peter Walter</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net 
  href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, September 09, 2005 1:44 
  PM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] Problems with 2811 
  as H.323-Gateway, CCM 4.1</DIV>
  <DIV><BR></DIV><BR><FONT face=sans-serif size=2>Hello,</FONT> <BR><FONT 
  face=sans-serif size=2>I try to configure a Cisco 2811 with VIC2-2BRI-NT/TE 
  and a PVDM2-16 to act as gateway between our CCM and our PBX.</FONT> <BR><FONT 
  face=sans-serif size=2>We had a test-equipment in July 2000 for 6 months with 
  2600 and a CCM 3.00, and it worked with the following config (see 
  below).</FONT> <BR><FONT face=sans-serif size=2>Now I tried to get the 2811 
  working with a new CCM 4.1, I know it is a different config, but no success, 
  and after hours and hours of </FONT><BR><FONT face=sans-serif size=2>reading, 
  I don't know any further... I think I read every single CCO-Document 
  ;-).</FONT> <BR><BR><FONT face=sans-serif size=2>When I turn on a "debug isdn 
  q931" I can see that an IP-Phone-Call (8200--&gt;1234) reaches the router, 
  </FONT><BR><FONT face=sans-serif size=2>but will not be forwarded to the PBX 
  (Cause i = 0x85B2 - Requested facility not subscribed).</FONT> <BR><FONT 
  face=sans-serif size=2>When I call an IP-Phone (8200) from the PBX (1234), the 
  call reaches the router, but will not be forwarded </FONT><BR><FONT 
  face=sans-serif size=2>to the CCM (Cause i = 0x80A2 - No circuit/channel 
  available). Debugs see below.</FONT> <BR><BR><FONT face=sans-serif size=2>We 
  have a CCIE-Voice-Consultant here to help us next week, but I want to get this 
  work, that I can play around a little bit.</FONT> <BR><FONT face=sans-serif 
  size=2>The rest works fine, CCM 4.1, 7912, 7940, 7960 with 7914, ATA with 
  analog phone, SRST-Fallback, Phone Services, </FONT><BR><FONT face=sans-serif 
  size=2>Global Directory and all the stuff, but this router.....</FONT> 
  <BR><BR><FONT face=sans-serif size=2>Sorry for the "newbie"-question, maybe 
  you can help me or point me to a newbie-discussion/forum.</FONT> <BR><BR><FONT 
  face=sans-serif size=2>Thanks in advance and have a nice weekend,</FONT> 
  <BR><FONT face=sans-serif size=2>HP</FONT> <BR><BR><BR><FONT face=sans-serif 
  size=2>============= Config from July 2000 
  ===================================</FONT> <BR><FONT face=sans-serif 
  size=2>voice-port 1/0/0</FONT> <BR><FONT face=sans-serif size=2>&nbsp;input 
  gain -6</FONT> <BR><FONT face=sans-serif size=2>&nbsp;cptone DE</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>voice-port 1/0/1</FONT> <BR><FONT face=sans-serif size=2>&nbsp;input 
  gain -6</FONT> <BR><FONT face=sans-serif size=2>&nbsp;cptone DE</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>dial-peer voice 2 voip</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;destination-pattern .</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;codec g711alaw</FONT> <BR><FONT face=sans-serif size=2>&nbsp;no 
  vad</FONT> <BR><FONT face=sans-serif size=2>&nbsp;session target 
  ipv4:10.200.112.10</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>dial-peer voice 10 pots</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;destination-pattern .</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;direct-inward-dial</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;port 1/0/0</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>dial-peer voice 11 
  pots</FONT> <BR><FONT face=sans-serif size=2>&nbsp;destination-pattern 
  .</FONT> <BR><FONT face=sans-serif size=2>&nbsp;direct-inward-dial</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;port 1/0/1</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>gateway</FONT> <BR><BR><FONT face=sans-serif size=2>============= 
  IP-Phone -8200 --&gt; PBX-Phone -1234: =============================</FONT> 
  <BR><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Bearer 
  Capability i = 0x8090A2 </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Standard = CCITT </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 
  Transfer Capability = Speech &nbsp;</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Transfer Mode = 
  Circuit </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; Transfer Rate = 64 kbit/s </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Channel ID i = 0x81 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Calling 
  Party Number i = 0x0081, '8200' </FONT><BR><FONT face=sans-serif size=2>&nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Plan:Unknown, Type:Unknown 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Called 
  Party Number i = 0x80, '1234' </FONT><BR><FONT face=sans-serif size=2>&nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Plan:Unknown, 
  Type:Unknown</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 17:16:55.964: 
  ISDN BR0/0/0 Q931: RX &lt;- CALL_PROC pd = 8 &nbsp;callref = 0x8D 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Channel ID 
  i = 0x89</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 17:16:56.016: 
  ISDN BR0/0/0 Q931: RX &lt;- DISCONNECT pd = 8 &nbsp;callref = 0x8D 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Cause i = 
  0x85B2 - Requested facility not subscribed</FONT> <BR><BR><FONT 
  face=sans-serif size=2>=============PBX-Phone -1234 --&gt; IP-Phone -8200 
  =============================</FONT> <BR><BR><FONT face=sans-serif size=2>Sep 
  &nbsp;9 17:17:48.300: ISDN BR0/0/0 **ERROR**: host_information: Unexpected 
  INFO - call id 0x8010</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 
  17:17:48.340: ISDN BR0/0/1 Q931: RX &lt;- SETUP pd = 8 &nbsp;callref = 0x2C 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Bearer 
  Capability i = 0x8890 </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Standard = CCITT </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; 
  Transfer Capability = Unrestricted Digital </FONT><BR><FONT face=sans-serif 
  size=2>&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Transfer Mode = 
  Circuit </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; Transfer Rate = 64 kbit/s </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Channel ID i = 0x8A 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Calling 
  Party Number i = 0x0080, '1234' </FONT><BR><FONT face=sans-serif size=2>&nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Plan:Unknown, Type:Unknown 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Called 
  Party Number i = 0x80, '8200' </FONT><BR><FONT face=sans-serif size=2>&nbsp; 
  &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; Plan:Unknown, 
  Type:Unknown</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 17:17:48.360: 
  ISDN BR0/0/1 Q931: TX -&gt; CALL_PROC pd = 8 &nbsp;callref = 0xAC 
  </FONT><BR><FONT face=sans-serif size=2>&nbsp; &nbsp; &nbsp; &nbsp; Channel ID 
  i = 0x8A</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 17:17:48.368: 
  ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x0, Calling num 
  1234</FONT> <BR><FONT face=sans-serif size=2>Sep &nbsp;9 17:17:48.368: ISDN 
  BR0/0/0 **ERROR**: CC_CHAN_GetIdleChanbri: All channels busy</FONT> <BR><FONT 
  face=sans-serif size=2>Sep &nbsp;9 17:17:48.392: ISDN BR0/0/1 Q931: TX -&gt; 
  DISCONNECT pd = 8 &nbsp;callref = 0xAC </FONT><BR><FONT face=sans-serif 
  size=2>&nbsp; &nbsp; &nbsp; &nbsp; Cause i = 0x80A2 - No circuit/channel 
  available</FONT> <BR><BR><BR><BR><FONT face=sans-serif size=2>============= 
  Config 2811tdsvoip1 =======================================</FONT> 
  <BR><BR><FONT face=sans-serif size=2>version 12.4</FONT> <BR><FONT 
  face=sans-serif size=2>service timestamps debug datetime msec</FONT> <BR><FONT 
  face=sans-serif size=2>service timestamps log datetime msec</FONT> <BR><FONT 
  face=sans-serif size=2>no service password-encryption</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>hostname 
  2811tdsvoip1</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>boot-start-marker</FONT> <BR><FONT face=sans-serif 
  size=2>boot system flash c2800nm-ipvoicek9-mz.124-3.bin</FONT> <BR><FONT 
  face=sans-serif size=2>boot-end-marker</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>logging buffered 10000 
  debugging</FONT> <BR><FONT face=sans-serif size=2>enable secret 5 
  $1$Yzkh$43RdMyrIkzoUSXl.EfzGN0</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>aaa new-model</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>aaa authentication login 
  default group tacacs+ enable</FONT> <BR><FONT face=sans-serif size=2>aaa 
  authentication enable default group tacacs+ enable</FONT> <BR><FONT 
  face=sans-serif size=2>aaa accounting commands 15 default start-stop group 
  tacacs+</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>aaa session-id common</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>resource policy</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>clock timezone MET 1</FONT> <BR><FONT face=sans-serif size=2>clock 
  summer-time MESZ recurring last Sun Mar 2:00 last Sun Oct 3:00</FONT> 
  <BR><FONT face=sans-serif size=2>network-clock-participate wic 0 
  </FONT><BR><FONT face=sans-serif size=2>network-clock-participate wic 1 
  </FONT><BR><FONT face=sans-serif size=2>ip subnet-zero</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>ip cef</FONT> <BR><FONT face=sans-serif 
  size=2>no ip dhcp use vrf connected</FONT> <BR><FONT face=sans-serif size=2>ip 
  dhcp excluded-address 10.200.0.1 10.200.0.9</FONT> <BR><FONT face=sans-serif 
  size=2>ip dhcp ping packets 5</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>ip dhcp pool VOIP</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp;network 10.200.0.0 255.255.252.0</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp; &nbsp;dns-server XXX</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp;domain-name tds.de</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp;default-router 10.200.0.1 </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp; &nbsp;option 150 ip 10.200.210.180 
  </FONT><BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>no ip domain lookup</FONT> 
  <BR><FONT face=sans-serif size=2>isdn switch-type basic-net3</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>voice-card 
  0</FONT> <BR><FONT face=sans-serif size=2>&nbsp;dspfarm</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>interface Loopback0</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;description Management-Interface 2811tdsvoip1</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;ip address 10.128.16.14 255.255.255.255</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>interface FastEthernet0/0</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;description Test-VLAN YY</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;ip address 10.200.210.66 255.255.255.0</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;duplex full</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;speed 100</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>interface FastEthernet0/1</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;description VLAN XX - VoIP-Telefone</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;ip address 10.200.0.1 
  255.255.252.0</FONT> <BR><FONT face=sans-serif size=2>&nbsp;duplex full</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;speed 100</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>interface 
  BRI0/0/0</FONT> <BR><FONT face=sans-serif size=2>&nbsp;no ip address</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn switch-type basic-net3</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn point-to-point-setup</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn incoming-voice voice</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn static-tei 0</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>interface 
  BRI0/0/1</FONT> <BR><FONT face=sans-serif size=2>&nbsp;no ip address</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn switch-type basic-net3</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn point-to-point-setup</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn incoming-voice voice</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn static-tei 0</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>interface 
  BRI0/1/0</FONT> <BR><FONT face=sans-serif size=2>&nbsp;no ip address</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn switch-type basic-net3</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;isdn point-to-point-setup</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>interface BRI0/1/1</FONT> <BR><FONT face=sans-serif size=2>&nbsp;no ip 
  address</FONT> <BR><FONT face=sans-serif size=2>&nbsp;isdn switch-type 
  basic-net3</FONT> <BR><FONT face=sans-serif size=2>&nbsp;isdn 
  point-to-point-setup</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>interface BRI0/3/0</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;no ip address</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;isdn switch-type basic-net3</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;isdn point-to-point-setup</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>ip classless</FONT> <BR><FONT 
  face=sans-serif size=2>ip route 0.0.0.0 0.0.0.0 10.200.210.1</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>ip http 
  server</FONT> <BR><FONT face=sans-serif size=2>no ip http secure-server</FONT> 
  <BR><FONT face=sans-serif size=2>ip tacacs source-interface Loopback0</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>access-list 100 deny &nbsp; ip any host 10.200.210.180</FONT> <BR><FONT 
  face=sans-serif size=2>access-list 100 permit ip any any</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>tacacs-server host XXX</FONT> <BR><FONT 
  face=sans-serif size=2>tacacs-server host XXX</FONT> <BR><FONT face=sans-serif 
  size=2>tacacs-server directed-request</FONT> <BR><FONT face=sans-serif 
  size=2>tacacs-server key 7 XXX</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>control-plane</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>voice-port 0/0/0</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>voice-port 0/0/1</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;input gain -6</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;cptone DE</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>voice-port 0/1/0</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>voice-port 0/1/1</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>dial-peer 
  voice 2 voip</FONT> <BR><FONT face=sans-serif size=2>&nbsp;description 
  Weiterleitung von TK zu Callmanager</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;destination-pattern 8200</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;session target ipv4:10.200.210.180</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;codec g711ulaw</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;no vad</FONT> <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT 
  face=sans-serif size=2>dial-peer voice 10 pots</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;destination-pattern .</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;direct-inward-dial</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;port 0/0/0</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>gateway </FONT><BR><FONT 
  face=sans-serif size=2>&nbsp;timer receive-rtp 1200</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>call-manager-fallback</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;max-conferences 8 gain -6</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;ip source-address 10.128.16.14 port 2000</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;max-ephones 42</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;max-dn 144</FONT> <BR><FONT face=sans-serif 
  size=2>&nbsp;system message primary Server TDS NSU nicht erreichbar</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;system message secondary 
  Backupmodus</FONT> <BR><FONT face=sans-serif size=2>&nbsp;time-zone 28</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;time-format 24</FONT> <BR><FONT 
  face=sans-serif size=2>&nbsp;date-format dd-mm-yy</FONT> <BR><FONT 
  face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif size=2>alias exec 
  dhcp1 sh ip dhcp binding </FONT><BR><FONT face=sans-serif size=2>alias exec 
  dhcp2 sh ip dhcp pool</FONT> <BR><FONT face=sans-serif size=2>!</FONT> 
  <BR><FONT face=sans-serif size=2>line con 0</FONT> <BR><FONT face=sans-serif 
  size=2>line aux 0</FONT> <BR><FONT face=sans-serif size=2>line vty 0 4</FONT> 
  <BR><FONT face=sans-serif size=2>&nbsp;exec-timeout 0 0</FONT> <BR><FONT 
  face=sans-serif size=2>line vty 5 20</FONT> <BR><FONT face=sans-serif 
  size=2>!</FONT> <BR><FONT face=sans-serif size=2>warm-reboot</FONT> <BR><FONT 
  face=sans-serif size=2>scheduler allocate 20000 1000</FONT> <BR><FONT 
  face=sans-serif size=2>ntp clock-period 17208792</FONT> <BR><FONT 
  face=sans-serif size=2>ntp source Loopback0</FONT> <BR><FONT face=sans-serif 
  size=2>ntp access-group peer 30</FONT> <BR><FONT face=sans-serif size=2>ntp 
  server XX</FONT> <BR><FONT face=sans-serif size=2>ntp server XX</FONT> 
  <BR><FONT face=sans-serif size=2>!</FONT> <BR><FONT face=sans-serif 
  size=2>end</FONT> <BR><BR><BR><BR><BR>
  <P>
  <HR>

  <P></P>_______________________________________________<BR>cisco-voip mailing 
  list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>