<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.0.6556.0">
<TITLE>Re: [cisco-voip] Q.SIG: problem with partitions</TITLE>
</HEAD>
<BODY dir=ltr>
<DIV>Thank you very much Ryan,</DIV>
<DIV> </DIV>
<DIV>I didn't know that about 'ccm-manager config': I've put this command in all
my mgcp gateways ;)</DIV>
<DIV> </DIV>
<DIV>My server is an MCS7825 HP with two RAID disks. I have the OS2000.4.2. I've
seen it has appeared in the cisco web page the SR1 for the OS 200.4.2: has
anybody already installed it?</DIV>
<DIV>Ryan, what are the bios upgrades that are you talking about? Are they
downloadable from cisco? I have also problems with one of the RAID disks, I
think I have to rebuild it, but I'm not sure.</DIV>
<DIV>Where can I find documentation about the hardware? In HP web page, in
Cisco's?</DIV>
<DIV> </DIV>
<DIV>Thanks,</DIV>
<DIV> </DIV>
<DIV>Ruben</DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV><FONT size=2>-----Mensaje original----- <BR><B>De:</B> Ryan Ratliff
[mailto:rratliff@cisco.com] <BR><B>Enviado el:</B> mié 30/11/2005 16:02
<BR><B>Para:</B> Ruben Montes <BR><B>CC:</B> erickbe@yahoo.com; Kevin
Thorngren; cisco-voip@puck-nether.net <BR><B>Asunto:</B> Re: [cisco-voip]
Q.SIG: problem with partitions<BR><BR></FONT></DIV>
<P><FONT size=2>The reason your calls work is because your gateway
unregistered. <BR>For a CSS change to take affect you have to
reset the gateway in <BR>question. If you are using the
'ccm-manager config' feature then a <BR>reset via the CCMAdmin will
work. If you aren't using this feature <BR>on the gateway you have
to do a 'no mgcp' and then 'mgcp' to <BR>reregister the gw.<BR><BR>As for
the crash if your server is an HP make sure you are running
OS <BR>2000.4.2. I've had two cases this week where HP recommended
bios <BR>upgrades due to "unpredictable issues" including system
hangs, <BR>reboots, etc. Supposedly the latest microcode in the
9/15/2004 bios <BR>addresses these.<BR><BR>-Ryan<BR><BR>On Nov 30, 2005,
at 9:16 AM, Ruben Montes wrote:<BR><BR>Hello,<BR><BR>is working now with the
same configuration... The only diference is <BR>that my publisher crashed
one hour ago and when it was restarted, <BR>this worked...<BR>Now I have
to troubleshoot what has happened: no eventviewer logs, no <BR>network
connectivity but port up... Something very strange!!! We are <BR>putting
this cluster in production next week and I doesn't feel
vey <BR>comfortable with
that...<BR><BR>Regards,<BR><BR>ruben<BR>-----Mensaje original-----<BR>De:
Erick Bergquist [<A
href="mailto:erickbe@yahoo.com">mailto:erickbe@yahoo.com</A>]<BR>Enviado el:
mié 30/11/2005 13:30<BR>Para: Ruben Montes; Kevin Thorngren<BR>CC:
cisco-voip@puck-nether.net<BR>Asunto: RE: [cisco-voip] Q.SIG: problem with
partitions<BR><BR>How about the CSS under the Incoming calls section of<BR>the
gateway config page? Did you reset the gateway in<BR>CCM after making
changes?<BR><BR>--- Ruben Montes <Ruben.Montes@eu.didata.com>
wrote:<BR><BR> > Hello Kevin,<BR> ><BR> > I have tried
that, adding the CSS in the mgcp<BR> > endpoint configuration page
with no luck... It's a<BR> > little bit strange what is
happening...<BR> ><BR> >
-----Mensaje original-----<BR> >
De: Kevin Thorngren [<A
href="mailto:kthorngr@cisco.com">mailto:kthorngr@cisco.com</A>]<BR> >
Enviado el: mi� 30/11/2005
13:03<BR> > Para: Ruben
Montes<BR> > CC:
cisco-voip@puck-nether.net<BR> >
Asunto: Re: [cisco-voip] Q.SIG: problem with<BR> >
partitions<BR> ><BR> ><BR> ><BR> >
The Calling Search Space assigned to the MGCP GW<BR> > will determine
what<BR> > devices (Partitions) it
can call. Sounds like you<BR> > need to assign a
CSS<BR> > to the GW that contains
the partition(s) that the<BR> > phones are
in.<BR> ><BR> >
Kevin<BR> > On Nov 30, 2005, at
6:03 AM, Ruben Montes
wrote:<BR> ><BR> > >
Hello,<BR> >
><BR> >
><BR> >
><BR> > > I have configured
an MGCP QSIG (C2851 with 2xE1<BR> > and CCM4.1(3)) with
an<BR> > > Ericsson MD110. All
the calls to the PBX numbers<BR> > from IP phones
work<BR> > >
fine.<BR> >
><BR> > > The problem
apperas when I try to call an IP<BR> > phone from the PBX: I
can<BR> > > only reach those
phones which aren't assigned to<BR> > any partition or
CSS.<BR> > > When I change the
partition, the result from a<BR> > debug q931
is<BR> > >
'Unassigned/unallocated number' and I cannot<BR> > reach the
phone.<BR> >
><BR> > > It is my first
QSIG with MGCP and partitions so I<BR> > assume it's
a<BR> > > configuration issue
related with partitions, but<BR> > I don't know where
to<BR> > >
search...<BR> >
><BR> > > I have followed
the Cisco doc " Cisco<BR> >
Callmanager4.1-PBX<BR> > >
Interoperability Ericsson MD-110" with no
luck...<BR> >
><BR> > > Thanks in
advance;<BR> >
><BR> > ><BR> >
Ruben_______________________________________________<BR> >
> cisco-voip mailing list<BR> >
>
cisco-voip@puck.nether.net<BR> >
><BR> > <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR> ><BR> ><BR> ><BR> >
> _______________________________________________<BR> > cisco-voip
mailing list<BR> > cisco-voip@puck.nether.net<BR> > <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR> ><BR><BR><BR><BR><BR><BR>__________________________________<BR>Yahoo!
Mail - PC Magazine Editors' Choice 2005<BR><A
href="http://mail.yahoo.com">http://mail.yahoo.com</A><BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR>cisco-voip@puck.nether.net<BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR><BR></FONT></P></BLOCKQUOTE>
</BODY>
</HTML>