<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.0.6556.0">
<TITLE>RE: [cisco-voip] Q.SIG: problem with partitions</TITLE>
</HEAD>
<BODY dir=ltr>
<DIV>Hello,</DIV>
<DIV> </DIV>
<DIV>is working now with the same configuration... The only diference is that my
publisher crashed one hour ago and when it was restarted, this worked... </DIV>
<DIV>Now I have to troubleshoot what has happened: no eventviewer logs, no
network connectivity but port up... Something very strange!!! We are putting
this cluster in production next week and I doesn't feel vey comfortable with
that...</DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV> </DIV>
<DIV>ruben</DIV>
<BLOCKQUOTE dir=ltr style="MARGIN-RIGHT: 0px">
<DIV><FONT size=2>-----Mensaje original----- <BR><B>De:</B> Erick Bergquist
[mailto:erickbe@yahoo.com] <BR><B>Enviado el:</B> mié 30/11/2005 13:30
<BR><B>Para:</B> Ruben Montes; Kevin Thorngren <BR><B>CC:</B>
cisco-voip@puck-nether.net <BR><B>Asunto:</B> RE: [cisco-voip] Q.SIG: problem
with partitions<BR><BR></FONT></DIV>
<P><FONT size=2>How about the CSS under the Incoming calls section of<BR>the
gateway config page? Did you reset the gateway in<BR>CCM after making
changes?<BR><BR>--- Ruben Montes <Ruben.Montes@eu.didata.com>
wrote:<BR><BR>> Hello Kevin,<BR>> <BR>> I have tried that,
adding the CSS in the mgcp<BR>> endpoint configuration page with no luck...
It's a<BR>> little bit strange what is happening...<BR>><BR>>
-----Mensaje original-----<BR>>
De: Kevin Thorngren [<A
href="mailto:kthorngr@cisco.com">mailto:kthorngr@cisco.com</A>]<BR>>
Enviado el: mi� 30/11/2005 13:03<BR>>
Para: Ruben Montes<BR>>
CC: cisco-voip@puck-nether.net<BR>>
Asunto: Re: [cisco-voip] Q.SIG: problem
with<BR>> partitions<BR>> <BR>>
<BR>><BR>>
The Calling Search Space assigned to the MGCP GW<BR>> will determine
what<BR>> devices (Partitions) it can
call. Sounds like you<BR>> need to assign a CSS<BR>>
to the GW that contains the partition(s) that
the<BR>> phones are in.<BR>> <BR>>
Kevin<BR>> On
Nov 30, 2005, at 6:03 AM, Ruben Montes wrote:<BR>>
<BR>> >
Hello,<BR>> ><BR>>
> <BR>>
><BR>>
> I have configured an MGCP QSIG (C2851 with 2xE1<BR>> and CCM4.1(3))
with an<BR>> > Ericsson MD110. All the
calls to the PBX numbers<BR>> from IP phones work<BR>>
> fine.<BR>>
><BR>>
> The problem apperas when I try to call an IP<BR>> phone from the PBX:
I can<BR>> > only reach those phones
which aren't assigned to<BR>> any partition or CSS.<BR>>
> When I change the partition, the result
from a<BR>> debug q931 is<BR>> >
'Unassigned/unallocated number' and I cannot<BR>> reach the phone.<BR>>
><BR>>
> It is my first QSIG with MGCP and partitions so I<BR>> assume it's
a<BR>> > configuration issue related with
partitions, but<BR>> I don't know where to<BR>>
> search...<BR>>
><BR>>
> I have followed the Cisco doc " Cisco<BR>> Callmanager4.1-PBX<BR>>
> Interoperability Ericsson MD-110" with no
luck...<BR>> ><BR>>
> Thanks in advance;<BR>>
><BR>>
><BR>> Ruben_______________________________________________<BR>>
> cisco-voip mailing list<BR>>
> cisco-voip@puck.nether.net<BR>>
><BR>> <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>>
<BR>>
<BR>><BR>> >
_______________________________________________<BR>> cisco-voip mailing
list<BR>> cisco-voip@puck.nether.net<BR>> <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>><BR><BR><BR><BR> <BR>
<BR>__________________________________<BR>Yahoo!
Mail - PC Magazine Editors' Choice 2005<BR><A
href="http://mail.yahoo.com">http://mail.yahoo.com</A><BR></FONT></P></BLOCKQUOTE>
</BODY>
</HTML>