<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2769" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>I have CME and CM4.1 installed. When I create
a conference from a CME IP Phone to other CME phones and CM IP
Phones,</FONT></DIV>
<DIV><FONT face=Arial size=2>it works correctly. However, when I
conference from CM IP phones and conference in CME IP Phones, it connects, then
immediately</FONT></DIV>
<DIV><FONT face=Arial size=2>drops the entire call and says "can not join
calls". Is there something onCall Manager I need to enable? I am
only using 2 CME phones and 1 CM IP Phone.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Thanks</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=kthorngr@cisco.com href="mailto:kthorngr@cisco.com">Kevin
Thorngren</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=bababooey@cox.net
href="mailto:bababooey@cox.net">Bob A. Bowie</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Cc:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, November 30, 2005 11:01
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: [cisco-voip] CME to CM 4.1
SCCP Call info</DIV>
<DIV><BR></DIV>Hi Bob,<BR><BR>Yes, that is the expected behavior. A call
between two phones on the same CME will have RTP streams directly between the
two phones. If the call is to another destination through the CME then the CME
is used as an MTP device for the call.<BR><BR>Kevin<BR>On Nov 30, 2005, at
12:51 AM, Bob A. Bowie wrote:<BR><BR>
<BLOCKQUOTE><?fontfamily><?param Arial><?smaller>Hello, I have a remote site
with CME 3.3 and my Call Manager Cluster 4.1.3 configured as H323 trunk<?/smaller><?/fontfamily><BR><?fontfamily><?param Arial><?smaller>through
the WAN. I have a question about call setup, as I am viewing the CME
side with a packet analyzer,<?/smaller><?/fontfamily><BR><?fontfamily><?param Arial><?smaller>I
see the CM IP phone stream to the CME router, and the CME router to the CME
IP Phone.<?/smaller><?/fontfamily><BR><?fontfamily><?param Arial><?smaller>QUestion:
since these are both sccp phones on a WAN, I thought the media stream should
be direct, once<?/smaller><?/fontfamily><BR><?fontfamily><?param Arial><?smaller>call
setup is completed? Is what I am seeing correct?<?/smaller><?/fontfamily><BR> <BR><?fontfamily><?param Arial><?smaller>Tx<?/smaller><?/fontfamily><BR> _______________________________________________<BR>cisco-voip
mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>