try adding <br> isdn channel-id invert extend-bit<br><br>Under your serial interface, i.e.<br><br>int ser0/0/0:23<br> isdn channel-id invert extend-bit<br><br>I had the same problem with a Nortel 61C and the above fixed it.
<br><br><div><span class="gmail_quote">On 12/29/05, <b class="gmail_sendername">Ryan Ratliff</b> <<a href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
The first call appears to be rejected by your PBX but I think the<br>debug is missing info. The "Cause i = 0x81B6 - Incoming calls are<br>barred" should probably appear in a Disconnect or Release message<br>from the PBX.
<br><br>The second one is also rejected by the PBX. I would guess because of<br>the Display IE but the second Release message is a bit confusing.<br><br>Is this H.323 or MGCP?<br><br>-Ryan<br><br>On Dec 29, 2005, at 8:13 AM, Sullivan, Gary, GREENWICH, Information
<br>Services wrote:<br><br>We have a PRI between are CCM and Nortel M1 pbx. Was working fine<br>until we upgraded.<br>We upgraded are CCM from 3.3.4 to 4.1.3 . Now we can't make any<br>calls. the D-channel is established.
<br>but when I try to make a call from my IP phone it disconnects right<br>away. when I call from Nortel to IP<br>it rings once then disconnects. I did a debug isdn q931 and see the<br>Messages.<br>Any help is appreciated
<br><br><br>ec 20 09:41:28.853: ISDN Se2/0:23 Q931: TX -> SETUP pd = 8 callref =<br>0x0001<br> Bearer Capability i = 0x8090A2<br> Standard = CCITT<br> Transer Capability = Speech
<br> Transfer Mode = Circuit<br> Transfer Rate = 64 kbit/s<br> Channel ID i = 0xA98381<br> Exclusive, Channel 1<br> Display i = 0xB1, 'Gary Sullivan'<br> Calling Party Number i = 0x0081, '3102'
<br> Plan:Unknown, Type:Unknown<br> Called Party Number i = 0x80, '0400'<br> Plan:Unknown, Type:Unknown<br><br>81<br> Cause i = 0x81B6 - Incoming calls are barred<br>GCTRT03#
<br>GCTRT03#<br>GCTRT03#<br>GCTRT03#<br>GCTRT03#<br>Dec 20 09:41:38.894: ISDN Se2/0:23 Q931: RX <- SETUP pd = 8 callref<br>= 0x17<br> Bearer Capability i = 0x8090A2<br> Standard = CCITT<br> Transer Capability = Speech
<br> Transfer Mode = Circuit<br> Transfer Rate = 64 kbit/s<br> Channel ID i = 0xE9808317<br> Exclusive, Interface 0, Channel 23<br> Display i = 0xB1, 'GARY SULLIVAN'
<br> Calling Party Number i = 0x0980, '0543'<br> Plan:Private, Type:Unknown<br> Called Party Number i = 0x89, '3102'<br> Plan:Private, Type:Unknown<br><br><br> Channel ID i = 0xA98397
<br> Exclusive, Channel 23<br>Dec 20 09:41:39.206: ISDN Se2/0:23 Q931: TX -> ALERTING pd = 8<br>callref = 0x97<br>Dec 20 09:41:39.210: ISDN Se2/0:23 Q931: TX -> NOTIFY pd = 8 callref<br>= 0x97<br> Connected Address i = 0x80, '3102'
<br> Notification Ind i = 0xF1<br> Display i = 0xB2, 'Gary Sullivan'<br>Dec 20 09:41:39.222: ISDN Se2/0:23 Q931: RX <- RELEASE pd = 8<br>callref = 0x17<br> Cause i = 0x81E4 - Invalid information element contents
<br>Dec 20 09:41:39.230: ISDN Se2/0:23 Q931: RX <- RELEASE pd = 8<br>callref = 0x17<br> Cause i = 0x81E0 - Mandatory information element missing<br><br><br>_______________________________________________<br>cisco-voip mailing list
<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br>_______________________________________________
<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip
</a><br></blockquote></div><br><br clear="all"><br>-- <br>--Patrick