<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1480" name=GENERATOR></HEAD>
<BODY>
<DIV><SPAN class=365131514-29122005><FONT face=Arial color=#0000ff size=2>When I
try to add that I get </FONT></SPAN></DIV>
<DIV><SPAN class=365131514-29122005> <FONT face=Arial
color=#0000ff size=2>GCTRT03(config-if)#isdn channel-id invert
extend-bit<BR>
^<BR>% Invalid input detected at '^' marker.<BR></FONT></SPAN></DIV>
<DIV><SPAN class=365131514-29122005><FONT face=Arial color=#0000ff size=2>The
router has is run image c3725-is-mz.122-15.T2.bin</DIV></FONT></SPAN>
<BLOCKQUOTE>
<DIV class=OutlookMessageHeader dir=ltr align=left><FONT face=Tahoma
size=2>-----Original Message-----<BR><B>From:</B> Patrick Aland
[mailto:paland@gmail.com]<BR><B>Sent:</B> Thursday, December 29, 2005 8:41
AM<BR><B>To:</B> Ryan Ratliff<BR><B>Cc:</B>
Sullivan,Gary,GREENWICH,Information Services;
cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] PRI between CCM
(3725) and Nortel M1<BR><BR></FONT></DIV>try adding <BR> isdn channel-id
invert extend-bit<BR><BR>Under your serial interface, i.e.<BR><BR>int
ser0/0/0:23<BR> isdn channel-id invert extend-bit<BR><BR>I had the same
problem with a Nortel 61C and the above fixed it. <BR><BR>
<DIV><SPAN class=gmail_quote>On 12/29/05, <B class=gmail_sendername>Ryan
Ratliff</B> <<A href="mailto:rratliff@cisco.com">rratliff@cisco.com</A>>
wrote:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0pt 0pt 0pt 0.8ex; BORDER-LEFT: rgb(204,204,204) 1px solid">The
first call appears to be rejected by your PBX but I think the<BR>debug is
missing info. The "Cause i = 0x81B6 - Incoming calls
are<BR>barred" should probably appear in a Disconnect or Release
message<BR>from the PBX. <BR><BR>The second one is also rejected by the PBX.
I would guess because of<BR>the Display IE but the second Release message is
a bit confusing.<BR><BR>Is this H.323 or MGCP?<BR><BR>-Ryan<BR><BR>On Dec
29, 2005, at 8:13 AM, Sullivan, Gary, GREENWICH, Information <BR>Services
wrote:<BR><BR>We have a PRI between are CCM and Nortel M1 pbx. Was working
fine<BR>until we upgraded.<BR>We upgraded are CCM from 3.3.4 to 4.1.3 . Now
we can't make any<BR>calls. the D-channel is established. <BR>but when I try
to make a call from my IP phone it disconnects right<BR>away. when I call
from Nortel to IP<BR>it rings once then disconnects. I did a debug isdn q931
and see the<BR>Messages.<BR>Any help is appreciated <BR><BR><BR>ec 20
09:41:28.853: ISDN Se2/0:23 Q931: TX -> SETUP pd = 8 callref
=<BR>0x0001<BR> Bearer
Capability i =
0x8090A2<BR>
Standard =
CCITT<BR>
Transer Capability = Speech
<BR>
Transfer Mode =
Circuit<BR>
Transfer Rate = 64
kbit/s<BR> Channel ID i =
0xA98381<BR>
Exclusive, Channel 1<BR>
Display i = 0xB1, 'Gary
Sullivan'<BR> Calling Party
Number i = 0x0081, '3102'
<BR>
Plan:Unknown,
Type:Unknown<BR> Called
Party Number i = 0x80,
'0400'<BR>
Plan:Unknown,
Type:Unknown<BR><BR>81<BR>
Cause i = 0x81B6 - Incoming calls are barred<BR>GCTRT03#
<BR>GCTRT03#<BR>GCTRT03#<BR>GCTRT03#<BR>GCTRT03#<BR>Dec 20 09:41:38.894:
ISDN Se2/0:23 Q931: RX <- SETUP pd = 8 callref<BR>=
0x17<BR> Bearer Capability i
=
0x8090A2<BR>
Standard =
CCITT<BR>
Transer Capability = Speech
<BR>
Transfer Mode =
Circuit<BR>
Transfer Rate = 64
kbit/s<BR> Channel ID i =
0xE9808317<BR>
Exclusive, Interface 0, Channel
23<BR> Display i = 0xB1,
'GARY SULLIVAN' <BR> Calling
Party Number i = 0x0980,
'0543'<BR>
Plan:Private,
Type:Unknown<BR> Called
Party Number i = 0x89,
'3102'<BR>
Plan:Private,
Type:Unknown<BR><BR><BR>
Channel ID i = 0xA98397
<BR>
Exclusive, Channel 23<BR>Dec 20 09:41:39.206: ISDN Se2/0:23 Q931: TX ->
ALERTING pd = 8<BR>callref = 0x97<BR>Dec 20 09:41:39.210: ISDN Se2/0:23
Q931: TX -> NOTIFY pd = 8 callref<BR>=
0x97<BR> Connected Address i
= 0x80, '3102' <BR>
Notification Ind i =
0xF1<BR> Display i = 0xB2,
'Gary Sullivan'<BR>Dec 20 09:41:39.222: ISDN Se2/0:23 Q931: RX <- RELEASE
pd = 8<BR>callref = 0x17<BR>
Cause i = 0x81E4 - Invalid information element contents <BR>Dec 20
09:41:39.230: ISDN Se2/0:23 Q931: RX <- RELEASE pd = 8<BR>callref =
0x17<BR> Cause i = 0x81E0 -
Mandatory information element
missing<BR><BR><BR>_______________________________________________<BR>cisco-voip
mailing list <BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR><BR>_______________________________________________
<BR>cisco-voip mailing list<BR><A
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip
</A><BR></BLOCKQUOTE></DIV><BR><BR clear=all><BR>-- <BR>--Patrick
</BLOCKQUOTE></BODY></HTML>