<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>
<DIV><FONT face=Arial size=2>Hi </FONT></DIV>
<DIV><FONT face=Arial size=2>I have an mc3810 router working as a sip ua to
connect a voip network to an Ericsson MD110 pabx via the 3810's E1 voice
interface. I'm using qsig as the E1 sig protocol</FONT></DIV>
<DIV><FONT face=Arial size=2>It works pretty well, voice, ringing etc all work
ok between the two systems, however can only get Calling Line ID (I think ANI in
the US) to work one way - ie the pabx extension number is displayed on the sip
handset on an incoming call, however the voip extension number is not displayed
on the pabx handset when calling the other way.</FONT></DIV>
<DIV><FONT face=Arial size=2>Debug q931 and voip ccapi shows the ANI and
dnis numbers in the signalling exchange so I'm inclined to think it could be a
pabx setting?</FONT></DIV>
<DIV><FONT face=Arial size=2>I can't find any cisco specific interface
commands related to the passing of CLI information across an E1. Would
appreciate it if anybody has any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2>thanks</FONT></DIV>
<DIV><FONT face=Arial size=2>paul</FONT> </DIV></DIV></BODY></HTML>