Yeah, I found out the hard way that if the line in question is not in
the first two positions on a 7960, it will not register... <br><br><div><span class="gmail_quote">On 1/19/06, <b class="gmail_sendername">Erick Bergquist</b> <<a href="mailto:erickbe@yahoo.com">erickbe@yahoo.com</a>> wrote:
</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Thats a start for outbound calls depending on what you<br>want to call, etc, but did you check the other things
<br>for the inbound calls? is 6701 assigned to a phone<br>and up/registered in fallback mode?<br><br>When the phones go into SRST mode, they will be<br>registered to router as virtual? dial-peers. Your<br>fallback configuration allows for 24 phones and 48
<br>DNs. 7910, 7935 and 7940 are allowed to have 1 DN in<br>fallback mode. So 6701 has to be first line on a phone<br>if it is a 7910/7935/7940 model. In fallback , try<br>calling 6701 from another IP phone in fallback and see
<br>if it rings.<br><br><br><br>> ip source-address <a href="http://10.200.7.253">10.200.7.253</a> port<br><br>--- Travis Llewellyn <<a href="mailto:travisll@comfedcu.org">travisll@comfedcu.org</a>> wrote:<br><br>
><br>> First, thanks to all that have replied.<br>> I think I understand what I am missing.<br>><br>> If I were to change these three lines from this<br>> dial-peer voice 99920 pots<br>> application mgcpapp
<br>> port 2/0<br>> !<br>> dial-peer voice 99921 pots<br>> application mgcpapp<br>> port 2/1<br>> !<br>> dial-peer voice 99922 pots<br>> application mgcpapp<br>> port 2/2<br>><br>> To This
<br>><br>> dial-peer voice 99920 pots<br>> application mgcpapp<br>> destination-pattern 9T<br>> port 2/0<br>> !<br>> dial-peer voice 99921 pots<br>> application mgcpapp<br>> destination-pattern 9T
<br>> port 2/1<br>> !<br>> dial-peer voice 99922 pots<br>> application mgcpapp<br>> destination-pattern 9T<br>> port 2/2<br>><br>> Should that work once it switches to SRST / H.323?<br>> Or do I need new dial-peers for when it goes into
<br>> fallback?<br>><br>> I do not know much about H.323 yet so what would I<br>> need to setup for the incoming dial peers?<br>><br>><br>> Travis Llewellyn<br>> Network Administrator<br>> Communication Federal Credit Union
<br>> <a href="mailto:travisll@comfedcu.org">travisll@comfedcu.org</a><br>><br>><br>-------------------------------------------------------------------------<br>><br>> Psalms 16:8 I have set the Lord always before me.
<br>> Because he is at my right hand, I will not be<br>> shaken.<br>> ________________________________________<br>> From: <a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>
<br>> [mailto:<a href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>] On<br>> Behalf Of Jonathan Charles<br>> Posted At: Thursday, January 19, 2006 12:00 PM<br>> Posted To: Cisco VOIP List
<br>> Conversation: [cisco-voip] SRST What am I missing<br>> Subject: Re: [cisco-voip] SRST What am I missing<br>> �<br>> First off, do the phones register via SRST and say<br>> "CCM Fallback" when the WAN connection goes down?
<br>><br>> Do a 'show ephone registered' when in fallback to<br>> see if they do register (or check the log<br>> afterwards, you should see the devices registering.<br>><br>> Assuming they do register, you are going to need
<br>> H.323 dial-peers to get outbound calls:<br>><br>> For example:<br>><br>> dial-peer voice 318 pots<br>> �destination-pattern 9T<br>> �port 2/0<br>><br>> etc...<br>><br>> You will also need an incoming dial-peer.
<br>><br>> Because when you are in SRST mode, MGCP is down, so<br>> you need to be in H.323 mode and need those<br>> dial-peers to route calls.<br>><br>><br>><br>><br>> Jonathan<br>> On 1/19/06, Travis Llewellyn <
<a href="mailto:travisll@comfedcu.org">travisll@comfedcu.org</a>><br>> wrote:<br>><br>> We have a 1760 that has 3 FXO ports that connect<br>> directly to SBC for<br>> incoming calls.<br>> Everything works perfectly with MGCP when the line
<br>> between that location<br>> and the Callmanager is up.<br>> But when the line drops there phones no longer work<br>> for incoming or<br>> outgoing calls.<br>> I expected the calls to come in on the fxo port and
<br>> goto station 6701<br>> and then roll to the rest all in the 670? Numbers.<br>> I also want them to be able to dial out those lines<br>> when the connection<br>> goes down.<br>><br>> So what am I missing?
<br>> Thanks for any help.<br>><br>><br>><br>> ccm-manager fallback-mgcp<br>> ccm-manager redundant-host <a href="http://10.200.9.250">10.200.9.250</a><br>> ccm-manager mgcp<br>> ccm-manager music-on-hold
<br>> ccm-manager config server <a href="http://10.200.9.250">10.200.9.250</a> <a href="http://10.200.9.249">10.200.9.249</a><br>> ccm-manager config<br>> control-plane !<br>> !<br>> call application alternate default
<br>> !<br>> voice-port 2/0<br>> timing hookflash-out 50<br>> !<br>> voice-port 2/1<br>> timing hookflash-out 50<br>> !<br>> voice-port 2/2<br>> timing hookflash-out 50<br>> !<br>> voice-port 2/3
<br>> !<br>> mgcp<br>> mgcp call-agent <a href="http://10.200.9.249">10.200.9.249</a> 2427 service-type mgcp<br>> version 0.1 mgcp<br>> dtmf-relay voip codec all mode out-of-band mgcp rtp<br>> unreachable timeout
<br>> 1000 action notify mgcp package-capability<br>> rtp-package no mgcp<br>> package-capability res-package mgcp<br>> package-capability sst-package no<br>> mgcp package-capability fxr-package no mgcp timer
<br>> receive-rtcp mgcp sdp<br>> simple mgcp fax t38 inhibit mgcp rtp payload-type<br>> g726r16 static mgcp<br>> bind control source-interface FastEthernet0/0.80 !<br>> mgcp profile default<br>> !<br>> !
<br>> !<br>> dial-peer cor custom<br>> !<br>> !<br>> !<br>> dial-peer voice 99920 pots<br>> application mgcpapp<br>> port 2/0<br>> !<br>> dial-peer voice 99921 pots<br>> application mgcpapp
<br>> port 2/1<br>> !<br>> dial-peer voice 99922 pots<br>> application mgcpapp<br>> port 2/2<br>> !<br>> !<br>> call-manager-fallback<br>> max-conferences 4<br>> limit-dn 7910 1<br>> limit-dn 7935 1
<br>> limit-dn 7940 1<br>> ip source-address <a href="http://10.200.7.253">10.200.7.253</a> port<br>> 2000��max-ephones 24��max-dn 48<br>> default-destination 6701��call-forward busy 670.<br>> call-forward noan 670. timeout 10
<br>><br>><br>><br>><br>> Travis Llewellyn<br>> Network Administrator<br>> Communication Federal Credit Union<br>> <a href="mailto:travisll@comfedcu.org">travisll@comfedcu.org</a><br>><br>><br>
------------------------------------------------------------------------<br>> -<br>> Proverbs 3:35 The wise inherit honor...<br>><br>><br>><br>-----------------------------------------------------------------
<br>> This e-mail and the files transmitted with it are<br>> the property<br>> of the sender and/or its affiliates, are<br>> confidential, and are<br>> intended solely for use of the individual or entity<br>
> to whom<br>> this e-mail is addressed. If you are not one of the<br>> named<br>> recipient(s) or otherwise have reason to believe<br>> that you have<br>> received this message in error, please notify the
<br>> sender by<br>> replying to the e-mail you received and delete this<br>> message<br>> from your computer immediately. Any other use,<br>> retention,<br>> dissemination, forwarding, printing, or copying of
<br>> this e-mail<br>> is strictly prohibited.<br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net
</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br>><br>><br>><br>-----------------------------------------------------------------
<br>> This e-mail and the files transmitted with it are<br>> the property<br>> of the sender and/or its affiliates, are<br>> confidential, and are<br>> intended solely for use of the individual or entity<br>
> to whom<br>> this e-mail is addressed. If you are not one of the<br>> named<br>> recipient(s) or otherwise have reason to believe<br>> that you have<br>> received this message in error, please notify the
<br>> sender by<br>> replying to the e-mail you received and delete this<br>> message<br>> from your computer immediately. Any other use,<br>> retention,<br>> dissemination, forwarding, printing, or copying of
<br>> this e-mail<br>> is strictly prohibited.<br>><br>> _______________________________________________<br>> cisco-voip mailing list<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net
</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br><br><br>__________________________________________________<br>Do You Yahoo!?<br>
Tired of spam? Yahoo! Mail has the best spam protection around<br><a href="http://mail.yahoo.com">http://mail.yahoo.com</a><br></blockquote></div><br>