<HTML><BODY style="word-wrap: break-word; -khtml-nbsp-mode: space; -khtml-line-break: after-white-space; ">FXO prevents you from receiving called party number from the PSTN, so you have to PLAR each of those lines.<DIV><BR class="khtml-block-placeholder"></DIV><DIV>looks like your VOIP dial-peer is pointing to an h323 destination, CM?</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>once the gateway sends the h323 call setup to CM, you can choose how you want the call routed in CM. you can: </DIV><DIV>configure the destination number as a shared lines on all phones with max calls=4 on the phone</DIV><DIV>configure the destiantion number as a hunt pilot to a huntlist to a linegroup of all the desired destination lines and ring broadcast, longest idle, etc.</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV>/Wes</DIV><DIV><BR class="khtml-block-placeholder"></DIV><DIV><BR><DIV><DIV>On Feb 15, 2006, at 11:23 AM, James Dust wrote:</DIV><BR class="Apple-interchange-newline"> <DIV dir="ltr" align="left"><SPAN class="719442116-15022006"><FONT face="Arial" color="#0000ff" size="2">Can anyone help us with this as we are no further forward.</FONT></SPAN></DIV><BR> <DIV class="OutlookMessageHeader" lang="en-us" dir="ltr" align="left"> <HR tabindex="-1"> <FONT face="Tahoma" size="2"><B>From:</B> cisco-voip-bounces@puck.nether.net [<A href="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of </B>Nick Kassel<BR><B>Sent:</B> 10 February 2006 14:24<BR><B>To:</B> <A href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><B>Subject:</B> [cisco-voip] Analog line / FXO Port issues<BR></FONT><BR></DIV> <DIV></DIV> <DIV class="Section1"><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">We are currently trying to set up one of our small remote sites utilising there 4 existing analogue lines, which have one number spread across them, we are a using a 4 port vic2-4fxo card in a 1760. We can make outgoing and incoming calls but are having issues with multiple incoming calls, we would like each phone to have just the one shared DN 86820 but can’t seem to get it to work so have been playing about with the voiceport and dialpeer configuration by adding another number to connection plar and on line 2 on the phones, please can any one help out with the correct way to set it up, below is our current config so far.</SPAN></FONT></P><DIV><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> <BR class="khtml-block-placeholder"></DIV><DIV><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> <BR class="khtml-block-placeholder"></DIV><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> !</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">voice-port 1/0</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> supervisory disconnect anytone</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> signal groundStart</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> output attenuation -4</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> cptone GB</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> connection plar 86820</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> impedance complex2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> description Wimborne Main Line</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">voice-port 1/1</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> supervisory disconnect anytone</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> signal groundStart</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> output attenuation -4</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> cptone GB</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> connection plar 86821</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> impedance complex2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> description Wimborne Main Line 2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">voice-port 1/2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> supervisory disconnect anytone</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> signal groundStart</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> output attenuation -4</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> cptone GB</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> connection plar 86820</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> impedance complex2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> description Wimborne Main Line 3</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">voice-port 1/3</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> supervisory disconnect anytone</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> signal groundStart</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> output attenuation -4</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> cptone GB</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> connection plar 86820</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> impedance complex2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> description Wimborne Main Line 4</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">no mgcp package-capability res-package</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">no mgcp package-capability fxr-package</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">no mgcp timer receive-rtcp</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">dial-peer voice 1 voip</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> preference 1</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> destination-pattern 86820</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> progress_ind setup enable 3</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> session target ipv4:172.30.0.2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> dtmf-relay h245-alphanumeric</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> no vad</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">dial-peer voice 20 pots</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> preference 8</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> destination-pattern 9.T</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> port 1/3</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">dial-peer voice 21 pots</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> preference 9</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> destination-pattern 9.T</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> port 1/2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">dial-peer voice 22 pots</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> preference 10</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> destination-pattern 9.T</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> port 1/1</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">!</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">dial-peer voice 2 voip</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> preference 2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> destination-pattern 86820</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> progress_ind setup enable 3</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> session target ipv4:172.30.0.2</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> dtmf-relay h245-alphanumeric</SPAN></FONT></P><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"> no vad</SPAN></FONT></P><DIV><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> <BR class="khtml-block-placeholder"></DIV><DIV><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> <BR class="khtml-block-placeholder"></DIV><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Regards</SPAN></FONT></P><DIV><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial"></SPAN></FONT> <BR class="khtml-block-placeholder"></DIV><P class="MsoNormal"><FONT face="Arial" size="2"><SPAN style="FONT-SIZE: 10pt; FONT-FAMILY: Arial">Nick </SPAN></FONT></P></DIV><BR><BR> <TABLE style="COLOR: black" bgcolor="white"> <TBODY><TR><TD><BR>***********************************************************************************************<BR><BR>The information contained in this e-mail is strictly confidential, some or all<BR>of which may be legally privileged. It is for the intended recipient only.<BR>Access to this e-mail by any other person is prohibited. If you are not the<BR>intended recipient, any use, disclosure, copying, printing, distribution of,<BR>replying to or any action taken or omitted to be taken in reliance on this<BR>e-mail, is prohibited and may be unlawful. Please contact the sender immediately<BR>should this e-mail have been incorrectly addressed or transmitted.<BR><BR>You accept that any instructions are deemed to have been given at the time the<BR>recipient(s) accesses them and that delivery receipt does not constitute<BR>acknowledgement or receipt by the intended recipient(s). You accept that there<BR>may be a delay in processing the instructions received from e-mails after<BR>Charles Stanley has received them. You are advised that urgent, time sensitive<BR>and confidential communications should not be sent by e-mail. <BR><BR>You acknowledge that e-mails are not secure and you accept the risk of<BR>malfunction, viruses, unauthorised interference, mis-delivery or delay.<BR>************************************************************************************************<BR><BR><BR>Charles Stanley & Co. Ltd<BR>Registered Office: 25 Luke Street London EC2A 4AR<BR><BR>Tel: 0207 739 8200 Fax: 0207 739 7798<BR>Registered in England No. 1903304<BR><BR>Charles Stanley Sutherlands and Tozer Wingate are divisions of Charles Stanley & Co. Ltd<BR><BR>Authorised and Regulated by the Financial Services Authority, Member of the<BR>London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<BR>Options Exchange.<BR><BR>This footnote also confirms that this email message has been swept by McAfee<BR>VirusScan and SurfControl Email Filter software.<BR></TD></TR></TBODY></TABLE><BR><BR><TABLE bgcolor="white" style="color:black"><TBODY><TR><TD><BR>***********************************************************************************************<BR> <BR> The information contained in this e-mail is strictly confidential, some or all<BR> of which may be legally privileged. It is for the intended recipient only.<BR> Access to this e-mail by any other person is prohibited. If you are not the<BR> intended recipient, any use, disclosure, copying, printing, distribution of,<BR> replying to or any action taken or omitted to be taken in reliance on this<BR> e-mail, is prohibited and may be unlawful. Please contact the sender immediately<BR> should this e-mail have been incorrectly addressed or transmitted.<BR> <BR> You accept that any instructions are deemed to have been given at the time the<BR> recipient(s) accesses them and that delivery receipt does not constitute<BR> acknowledgement or receipt by the intended recipient(s). You accept that there<BR> may be a delay in processing the instructions received from e-mails after<BR> Charles Stanley has received them. You are advised that urgent, time sensitive<BR> and confidential communications should not be sent by e-mail. <BR> <BR> You acknowledge that e-mails are not secure and you accept the risk of<BR> malfunction, viruses, unauthorised interference, mis-delivery or delay.<BR> ************************************************************************************************<BR> <BR> <BR> Charles Stanley & Co. Ltd<BR> Registered Office: 25 Luke Street London EC2A 4AR<BR> <BR> Tel: 0207 739 8200 Fax: 0207 739 7798<BR> Registered in England No. 1903304<BR> <BR> Charles Stanley Sutherlands and Tozer Wingate are divisions of Charles Stanley & Co. Ltd<BR> <BR> Authorised and Regulated by the Financial Services Authority, Member of the<BR> London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<BR> Options Exchange.<BR> <BR> This footnote also confirms that this email message has been swept by McAfee<BR> VirusScan and SurfControl Email Filter software.<BR> </TD></TR></TBODY></TABLE><DIV style="margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; ">_______________________________________________</DIV><DIV style="margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; ">cisco-voip mailing list</DIV><DIV style="margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; "><A href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A></DIV><DIV style="margin-top: 0px; margin-right: 0px; margin-bottom: 0px; margin-left: 0px; "><A href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A></DIV> </DIV><BR></DIV></BODY></HTML>