<br><font size=2 face="sans-serif">Anthony,</font>
<br>
<br><font size=2 face="sans-serif">This is the exact reason why we do not use MGCP on any gateways (unless we absolutly need to) and we do all digit manipulation on the gateway. Callmanager does not give you nearly enough functions for digit manipulation</font>
<br>
<br><font size=2 face="sans-serif">Craig<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td>
<td><font size=1 face="sans-serif"><b>Anthony Kouloglou <akoul@dataways.gr></b></font>
<br><font size=1 face="sans-serif">Sent by: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">03/24/2006 05:35 AM</font>
<br>
<td><font size=1 face="Arial"> </font>
<br><font size=1 face="sans-serif"> To: "cisco-voip@puck-nether.net" <cisco-voip@puck.nether.net></font>
<br><font size=1 face="sans-serif"> cc: </font>
<br><font size=1 face="sans-serif"> Subject: Re: [cisco-voip] How to add the # sign at the end of the number?</font></table>
<br>
<br>
<br><font size=2 face="Courier New"><br>
I think i will go crazy!!<br>
There is no way to add a particular pattern at the end of a pattern <br>
withing a CCM dial plan?<br>
It does not seem reasonable... :-(<br>
<br>
Anthony<br>
<br>
Teodor Dobrev wrote:<br>
> Are we talking for dial rules on the gateway? If so you can make something like that<br>
><br>
> voice translation-rule 2<br>
> rule 1 /^02\(.*\)/ /0\1#/ type any unknown plan any unknown<br>
> rule 2 /^0\(.*\)/ /00\1#/ type any unknown plan any unknown<br>
> rule 3 /^3592\(.*\)/ /0\1#/ type any unknown plan any unknown<br>
> rule 4 /^359\(.*\)/ /00\1#/ type any unknown plan any unknown<br>
><br>
> What happens is that you match any call starting with 02, get any digits after as set1 and put this set of digits after 0, and put # at the end<br>
> Hope that work for you!<br>
><br>
> BR,Teo<br>
><br>
> -----Original Message-----<br>
> From: cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Anthony Kouloglou<br>
> Sent: 24 ???? 2006 ?. 09:48<br>
> To: cisco-voip@puck-nether.net<br>
> Subject: [cisco-voip] How to add the # sign at the end of the number?<br>
><br>
> Hi all,<br>
> all my route patterns are configured at the end with the "#" sign. For <br>
> example i have a 0.!# general pattern for outside calls. I had to put <br>
> the # to provide the end of the call.<br>
> Now, i want to be able to make calls from the OutlookExpress contacts. I <br>
> can use Dial Rules to make any changes i want to the prefix but how can <br>
> i add the # sign at the end of each call?<br>
><br>
> Thanks<br>
> _______________________________________________<br>
> cisco-voip mailing list<br>
> cisco-voip@puck.nether.net<br>
> https://puck.nether.net/mailman/listinfo/cisco-voip<br>
><br>
> <br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
</font>
<br>
<br>