<br><font size=2 face="sans-serif">I had the same issue ;-), it's a feature...
but there's a solution from Wes:</font>
<br><font size=2 face="sans-serif">https://puck.nether.net/pipermail/cisco-voip/2006-February/010023.html</font>
<br>
<br><font size=3><tt>hey,<br>
I have a hunt pilot (-0) for our front desk.<br>
In the associated hunt list (HL), I have a line group (LG) with several
<br>
phones (circular).<br>
<br>
When a customer calls the -0, and somebody tries to PICKUP a ringing <br>
phone, nothing <br>
happens. When I directly call a DN of any phone, any other phone can <br>
pickup that call.<br>
So the problem: I can not pickup calls from a HP/HL/LG, but I'm not sure
<br>
whether this is a <br>
bug or a feature ;-). I googled and found <br>
</tt></font><a href="http://www.ciscotaccc.com/voice/showcase?case=K11612191"><font size=3 color=blue><tt><u>http://www.ciscotaccc.com/voice/showcase?case=K11612191</u></tt></font></a><font size=3><tt><br>
<br>
By the way, in another setup I have a HP (-00) with a HL with several LG,
<br>
and in the first LG there is only <br>
one DN (another Front Desk with only one person). When that phone is on
<br>
"CallForwardAll", calls for the <br>
HP/HL/LG (-00) are not forwarded, the phone rings ;-). I found a <br>
workaround, but is there another solution?<br>
<br>
thanks<br>
</tt></font>
<br><font size=2 face="sans-serif">================================================================================================================</font>
<br>
<br><font size=3><tt>The cisco.com article you reference is spot on.&nbsp; This is only 'fixed'<br>
in 4.1(3)sr2 or 4.1(3)es30 and later.&nbsp; Note the 'fix' is not fully<br>
regression tested so your mileage may vary.<br><br>
<br><br>
How to enable this functionality after upgrade to appropriate version:<br><br>
1. Enter CSCsb42763 (in mixed case)&nbsp; in&nbsp; the&nbsp; Enterprise Parameter<br>
'Cisco Support Use 1'&nbsp; under&nbsp; <br><br>
&nbsp;&nbsp;&nbsp; the new group 'Cisco Support use Only'&nbsp; and click update. Only the<br>
value CSCsb42763 in this <br><br>
&nbsp;&nbsp;&nbsp; parameter&nbsp; can enable the&nbsp; configuration in step 2.&nbsp; Change the<br>
value to&nbsp; anything else to <br><br>
&nbsp;&nbsp; disable this functionality.<br><br>
2. Go to Hunt Pilot Configuration page and select a call pickup group&nbsp;<br>
from the Call Pickup Group<br><br>
&nbsp;&nbsp; dropdown list and click update.<br><br>
<br><br>
/Wes<br></tt></font>
<br>
<br>
<br>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>"Martin Lohnert"
<lohnert@gmail.com></b> </font>
<br><font size=1 face="sans-serif">Gesendet von: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">28.03.2006 15:52</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">An</font></div>
<td><font size=1 face="sans-serif">cisco-voip@puck.nether.net</font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Kopie</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Thema</font></div>
<td><font size=1 face="sans-serif">[cisco-voip] CFwdAll - not quite</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><font size=3>Hey all,</font>
<br><font size=3>I've just found a situation where a phone with Call-Forward-All
enabled will ring. If that phone is a member of a hunt scenario (Hunt Pilot
- Hunt List - Line Group) a call to the hunt pilot will simply ring on
the phone as normal, ignoring CFwdAll setting... This is with CCM4.1.3sr3a.
Bug or Feature? :)</font>
<br><font size=3>ML</font><font size=2><tt>_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
</tt></font>
<br>