<div>I know this is probably elementary but, I am having issues getting a 7960 to work with a PC hanging off the phone PC port. I am using CCM 4.1(3)sr2 with the latest firmware device pack loaded (26.3). The phones a hanging from a 3524XL inline power switch. I am able to DHCP IPs from both the voice and access vlans from the switch in phone/PC separate port configuration. I tried two different configurations on the switch ports:</div> <div> </div> <div>Interface Fa 0/1</div> <div> switchport trunk encapsulation dot1q</div> <div> switchport mode trunk</div> <div> switchport access vlan 5</div> <div> switchport voice vlan 90</div> <div>(In this mode the DHCPs an IP and works, but the PC never DHCPs an IP)</div> <div> </div> <div>Interface Fa 0/1</div> <div> switchport mode access</div> <div> switchport access vlan 5</div> <div> switchport voice vlan 90</div>
<div>(In this mode the PC DHCPs an IP and works, but the phone does not work)</div> <div> </div> <div>Can someone tell me if I am stuck on stupid here? Thanks all!</div> <div> </div> <div>Peter</div> <div> </div> <div> </div><p>
<hr size=1>Yahoo! Messenger with Voice. <a href="http://us.rd.yahoo.com/mail_us/taglines/postman1/*http://us.rd.yahoo.com/evt=39663/*http://voice.yahoo.com">Make PC-to-Phone Calls</a> to the US (and 30+ countries) for 2¢/min or less.