<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2802" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=312220812-13042006><FONT face=Arial
color=#0000ff size=2>From your debugs, it looks like the remote site is note
responding to your layer 2 requests. Does the telco still have the circuit
in loopback?</FONT></SPAN></DIV><BR>
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> Alan Su [mailto:cj.alan@gmail.com]
<BR><B>Sent:</B> Thursday, April 13, 2006 8:02 AM<BR><B>To:</B> Matt Slaga
(US)<BR><B>Cc:</B> Kevin Thorngren;
cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] CallManager
Problem - Make outside call<BR></FONT><BR></DIV>
<DIV></DIV>
<DIV>Hi Matt,</DIV>
<DIV> </DIV>
<DIV>After the framing changed, the e1 1/0 is down.</DIV>
<DIV> </DIV>
<DIV>HK-VGW#sh controllers e1 1/0<BR>E1 1/0 is down.<BR> Applique type is
Channelized E1 - balanced<BR> Receiver has remote alarm.<BR>
alarm-trigger is not set<BR> Version info Firmware: 20050620, FPGA: 16,
spm_count = 0 <BR> Framing is NO-CRC4, Line Code is HDB3, Clock Source is
Line.<BR> CRC Threshold is 320. Reported from firmware is
320.<BR> Data in current interval (5 seconds
elapsed):<BR> 0 Line Code Violations, 0 Path Code
Violations <BR> 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err
Secs, 0 Degraded Mins<BR> 0 Errored Secs, 0 Bursty Err
Secs, 0 Severely Err Secs, 5 Unavail Secs</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Regards/Alan<BR><BR> </DIV>
<DIV><SPAN class=gmail_quote>2006/4/13, Matt Slaga (US) <<A
href="mailto:Matt.Slaga@us.didata.com">Matt.Slaga@us.didata.com</A>>:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">
<DIV style="DIRECTION: ltr">
<DIV dir=ltr align=left><SPAN><FONT face=Arial color=#0000ff size=2>Under the
Controller e1 1/0, try adding "framing NO-CRC4".</FONT></SPAN></DIV><BR>
<DIV lang=en-us dir=ltr align=left>
<HR>
<FONT face=Tahoma size=2><B>From:</B> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip-bounces@puck.nether.net"
target=_blank>cisco-voip-bounces@puck.nether.net</A> [mailto:<A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip-bounces@puck.nether.net" target=_blank>
cisco-voip-bounces@puck.nether.net</A>] <B>On Behalf Of </B>Alan
Su<BR><B>Sent:</B> Thursday, April 13, 2006 7:48 AM<BR><B>To:</B> Kevin
Thorngren<BR><B>Cc:</B> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip@puck.nether.net"
target=_blank>cisco-voip@puck.nether.net</A><BR><B>Subject:</B> Re:
[cisco-voip] CallManager Problem - Make outside
call<BR></FONT><BR> </DIV></DIV>
<DIV style="DIRECTION: ltr"><SPAN class=e id=q_10a931e834f98c9b_1>
<DIV></DIV>
<DIV>Hi Kevin,</DIV>
<DIV> </DIV>
<DIV>I already put the command in s1/0:15 interface but it didn't work.</DIV>
<DIV>Attached is the configuration and other information of this router which
include:</DIV>
<DIV>sh ver</DIV>
<DIV>sh run</DIV>
<DIV>sh controllers e1 1/0<BR>sh int s1/0:15</DIV>
<DIV>sh voice port summary </DIV>
<DIV>sh isdn status</DIV>
<DIV>debug isdn q921</DIV>
<DIV>sh ccm-manager</DIV>
<DIV> </DIV>
<DIV>Thanks a lot for your great help.</DIV>
<DIV> </DIV>
<DIV> </DIV>
<DIV>Regards,</DIV>
<DIV> </DIV>
<DIV>Alan<BR> </DIV>
<DIV><SPAN class=gmail_quote>2006/4/13, Kevin Thorngren <<A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:kthorngr@cisco.com"
target=_blank>kthorngr@cisco.com</A>>:</SPAN>
<BLOCKQUOTE class=gmail_quote
style="PADDING-LEFT: 1ex; MARGIN: 0px 0px 0px 0.8ex; BORDER-LEFT: #ccc 1px solid">Hi
Alan,<BR><BR>I am assuming the "Primary Rate ISDN software, Version 1.1."
is<BR>referring to a data PRI interface. The enacp ppp command
won't work on <BR>this interface as it is a voice interface. It
sounds like the problem<BR>is that serial 1/0:15 needs to have the following
command to bind the<BR>layer 3 to CCM:<BR><BR>isdn bind-l3
ccm-manager<BR><BR>If this doesn't help, maybe you can post your router
config. <BR><BR>Kevin<BR>On Apr 12, 2006, at 10:53 PM, Alan Su
wrote:<BR><BR>> Dear Kevin,<BR>> <BR>> I found that my ISDN layer 2
status stock in "TEI_ASSIGNED" &<BR>> "AWAITING_ESTABLISHMENT". But
the MGCP packet and registration with <BR>> CCM looks normal.<BR>> I
also found that in the router "sh ver", there is no "Primary Rate<BR>>
ISDN software, Version 1.1."<BR>> and I can't use "encapsulation ppp" in
serial1/0:15, it shows <BR>> "%Hardware does not support ISDN data calls;
encapsulation not set."<BR>> My router platform is Cisco 3745 (R7000)
processor (revision 2.0),<BR>> below is the "sh ver":<BR>>
-----------------------------------------------------------------------
<BR>> -------------------------------------------------------<BR>>
Cisco 3745 (R7000) processor (revision 2.0) with 112640K/18432K
bytes<BR>> of memory.<BR>> Processor board ID JMX0630K5DB<BR>>
R7000 CPU at 350MHz, Implementation 39, Rev 3.3, 256KB L2, 2048KB L3<BR>>
Cache<BR>> 2 FastEthernet interfaces<BR>> 24 Serial interfaces<BR>>
1 Serial(sync/async) interface<BR>> 1 Channelized E1/PRI port<BR>>
DRAM configuration is 64 bits wide with parity disabled. <BR>> 151K bytes
of NVRAM.<BR>> 31296K bytes of ATA System CompactFlash
(Read/Write)<BR>>
-----------------------------------------------------------------------<BR>>
------------------------------------------------------- <BR>> Do I miss
any hardware module for voice function ? Thanks so much for<BR>> your
help.<BR>> <BR>> <BR>> Regards,<BR>> <BR>> Alan<BR>>
<BR>> 2006/4/12, Kevin Thorngren <<A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:kthorngr@cisco.com" target=_blank> kthorngr@cisco.com</A>>:
Hi Alan,<BR>>><BR>>> Does the MGCP GW show registered in
CCMAdmin?<BR>>><BR>>> Is the voice port on the GW
up?<BR>>><BR>>> Does "show isdn stat" show
"multiple_frame_established"? <BR>>><BR>>> Does the CSS of the
phone contain the Partition that the Route Pattern<BR>>> is
in?<BR>>><BR>>> You can use "debug mgcp packet" to see if CCM is
sending the call via<BR>>> MGCP to the GW.<BR>>><BR>>>
Kevin<BR>>><BR>>> On Apr 11, 2006, at 12:55 PM, Alan Su
wrote:<BR>>><BR>>> > Hi Kevin,<BR>>> ><BR>>>
> I tried all those different pattern, but still can't get any
<BR>>> response<BR>>> > (even the outside dial tone). and I
use debug isdn q.921/q.931/event<BR>>> > but no see anything in my
voice gateway. is it possible that i wrong<BR>>> > configure in
gateway ? how can I verify is there any signal really <BR>>> >
comes from CCM to my MGCP gateway? Thanks a lot ~<BR>>>
><BR>>> ><BR>>> > Regards,<BR>>> ><BR>>>
> Alan<BR>>> ><BR>>> ><BR>>> > 2006/4/12,
Kevin Thorngren < <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:kthorngr@cisco.com" target=_blank>kthorngr@cisco.com</A>>:
Hi Alan,<BR>>> >><BR>>> >> I had a typo below.In the
US we would dial 011 for international <BR>>> >> patterns.My
below example should have had 9.011!.The "!" allows<BR>>> >>
users to keep dialing digits until the interdigit timeout timer<BR>>>
>> expires<BR>>> >> (15 seconds).You could use the
following two patterns: <BR>>> >><BR>>> >>
9.!<BR>>> >> 9.!#<BR>>> >><BR>>> >> The
"#" allows the users to terminate the dialing with a #.Point<BR>>>
>> both<BR>>> >> Route Patterns to the same GW or RL.
<BR>>> >><BR>>> >> Once CCM determines the call is
an outside call then it will play<BR>>> >> outside dialtone.If
you don't have any internal patterns that
begin<BR>>> >> with 9 then the users should hear
outside dialtone after the 9 is <BR>>> >> dialed.The "!" allows
them to continue dialing.In the first<BR>>> >>
pattern<BR>>> >> CCM will wait 15 seconds after the last digit
(interdigit timeout)<BR>>> >> before extending the call.The
second pattern allows the user to<BR>>> >> terminate the dialing
with a # and CCM will extend the call right<BR>>> >>
away.<BR>>> >><BR>>> >> Here is an example of the UK
numbering plan. <BR>>> >> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/"
target=_blank>http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/
</A><BR>>> >> products_tech_note09186a008028af3a.shtml
<BR>>> >><BR>>> >> Kevin<BR>>>
>><BR>>> >> On Apr 11, 2006, at 11:42 AM, Alan Su
wrote:<BR>>> >> <BR>>> >> > Hi
Kelvin,<BR>>> >> ><BR>>> >> > Thanks a lot,
I'll study those valuable documents you share with<BR>>>
me.<BR>>> >> > Regarding the dialing pattern, I also have
below questions: <BR>>> >> > 1. What if I'm in out of US ? Do
I still can use @ for typical <BR>>> north<BR>>> >> >
American dial plan ?<BR>>> >> ><BR>>> >> > 2.
Can user only dial one digit (ex:9), and after hearing the <BR>>>
dial<BR>>> >> > tone then begin to dial the outside number?
In this case, I can't <BR>>> >> set<BR>>> >> >
the full pattern in my route pattern, how should I configure it ?
<BR>>> >> ><BR>>> >> > Many many thanks for
your help.<BR>>> >> > <BR>>> >> ><BR>>>
>>> Regards,<BR>>> >> ><BR>>> >> >
Alan <BR>>> >> ><BR>>> >> ><BR>>>
>> > 2006/4/11, Kevin Thorngren < <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:kthorngr@cisco.com" target=_blank>kthorngr@cisco.com </A>>:
Hi Alan,<BR>>> >> >><BR>>> >> >> The 9.
pattern needs to match the full pattern you are<BR>>>
using.Some<BR>>> >> >> examples are: <BR>>> >>
>> <BR>>> >> >>9.@ - typical north American dial
plan macro that matches local,<BR>>> >> ld<BR>>> >>
>> and<BR>>> >> >> international patterns.
<BR>>> >> >> 9.[2-9]XXXXXX - More specific pattern for
local 7 digit dialing <BR>>> >> >> 9.1[2-9]XX[2-9]XXXXXX -
More specific pattern for LD dialing<BR>>> >> >> 9.011T -
More specifc pattern for international dialing<BR>>> >>
>><BR>>> >> >> The CCM will need to match the full
pattern dialed from the <BR>>> phone<BR>>> >> >>
before extending the call to the GW.With 9. the GW is receiving<BR>>>
a<BR>>> >> >> blank dialed number (assuming you are doing
pre-dot<BR>>> discard).Also <BR>>> >> >>
you<BR>>> >> >> will want to select the option for outside
dialtone.The below<BR>>> links<BR>>> >> >> should
help describe this.<BR>>> >> >> <BR>>> >>
>> <A onclick="return top.js.OpenExtLink(window,event,this)"
href="http://www.cisco.com/en/US/products/sw/voicesw/ps556/"
target=_blank>http://www..cisco.com/en/US/products/sw/voicesw/ps556/
</A><BR>>> >> >>
products_tech_note09186a0080094b2a.shtml<BR>>> >>
>><BR>>> >> >> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="http://www.cisco.com/en/US/products/sw/voicesw/ps556/"
target=_blank>http://www..cisco.com/en/US/products/sw/voicesw/ps556/
</A><BR>>> >> >>
products_tech_note09186a00800945b9.shtml<BR>>> >>
>><BR>>> >> >> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="http://www.cisco.com/en/US/products/sw/voicesw/ps556/"
target=_blank>http://www..cisco.com/en/US/products/sw/voicesw/ps556/
</A><BR>>> >> >>
products_administration_guide_chapter09186a00803edabe.html<BR>>>
>> >><BR>>> >> >> <A
onclick="return top.js.OpenExtLink(window,event,this)"
href="http://www.cisco.com/en/US/products/sw/voicesw/ps556/"
target=_blank>http://www..cisco.com/en/US/products/sw/voicesw/ps556/
</A><BR>>> >> >>
products_administration_guide_chapter09186a00803ed685.html<BR>>>
>> >><BR>>> >> >> HTH,<BR>>> >>
>> Kevin <BR>>> >> >> On Apr 11, 2006, at 7:47 AM,
Alan Su wrote: <BR>>> >> >><BR>>> >> >>
> Dear All,<BR>>> >> >> ><BR>>> >>
>>> My IPT architecture is: CCM( 4.02) + Voice Gateway(3745
runing<BR>>> >> MGCP <BR>>> >> >>
w/<BR>>> >> >> > E1 PRI trunk to PSTN).<BR>>>
>> >> > I already configured the MGCP and ccm-manager option
in the <BR>>> voice<BR>>> >> >> > gateway, and
it's registered to CM without any problem. <BR>>> >> >>
> I also made the gateway configuratio in CCM to this router.<BR>>>
>> >> > <BR>>> >> >> > Right now my
problem is, I don't know how to setup the route <BR>>> >>
pattern<BR>>> >> >> > to allow IP Phone to make outside
call.<BR>>> >> >> > My idea is, when user dial "9", the
phone will provide an <BR>>> outside <BR>>> >> >>
dial<BR>>> >> >> > tone and user can directly dial the
PSTN phone number to<BR>>> >> complete a<BR>>> >>
>> > call (just like the old fashion way). But when I configure the
<BR>>> >> route<BR>>> >> >> > pattern "9."
and set the S1/DS1-0@VGW to be the gateway,<BR>>> there is<BR>>>
>> >> > nothing but a "Bad Address". <BR>>> >>
>> ><BR>>> >> >> > Does anyone know how to
find the reference document for the<BR>>> >> >> >
configuration or how to fix this problem? I did lots of search <BR>>>
>> but<BR>>> >> >> > nothing found. Any comment
would be very grateful. Thanks a<BR>>> lot ~<BR>>> >>
>> ><BR>>> >> >> ><BR>>> >>
>> > Regards, <BR>>> >> >> ><BR>>>
>> >> > Alan<BR>>> >> >> ><BR>>>
<VGW-Config.txt>_______________________________________________<BR>>>
>> >> > cisco-voip mailing list <BR>>> >>
>> > <A onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip@puck.nether.net"
target=_blank>cisco-voip@puck.nether.net</A><BR>>> >> >>
> <A onclick="return top.js.OpenExtLink(window,event,this)"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target=_blank>https://puck..nether.net/mailman/listinfo/cisco-voip
</A><BR>>> >> >><BR>>>
>><BR>>><BR><BR></BLOCKQUOTE></DIV><BR></SPAN></DIV>
<DIV style="DIRECTION: ltr">
<P>
<HR SIZE=1>
<P></P><BR>
<P><STRONG><BR>Disclaimer:<BR><BR>This e-mail communication and any
attachments may contain<BR>confidential and privileged information and is for
use by the<BR>designated addressee(s) named above only. If you are not the
<BR>intended addressee, you are hereby notified that you have received<BR>this
communication in error and that any use or reproduction of<BR>this email or
its contents is strictly prohibited and may be<BR>unlawful. If you have
received this communication in error, please <BR>notify us immediately by
replying to this message and deleting it<BR>from your computer. Thank
you.<BR></STRONG></P>
<P></P></DIV></BLOCKQUOTE></DIV><BR></BODY></HTML>
<HTML><BODY><P><hr size=1></P><br>
<P><STRONG><br>
Disclaimer:<br>
<br>
This e-mail communication and any attachments may contain<br>
confidential and privileged information and is for use by the<br>
designated addressee(s) named above only. If you are not the<br>
intended addressee, you are hereby notified that you have received<br>
this communication in error and that any use or reproduction of<br>
this email or its contents is strictly prohibited and may be<br>
unlawful. If you have received this communication in error, please<br>
notify us immediately by replying to this message and deleting it<br>
from your computer. Thank you.<br>
</STRONG></P></BODY></HTML>