<html><head><style type="text/css"><!-- DIV {margin:0px} --></style></head><body><div style="font-family:times new roman, new york, times, serif;font-size:12pt">The port role-type would be switch if you are connecting to a router so VLANs get passed from my last reading of the catex 500 docs. There is not a way to specify what VLANs belong to a trunk port on the express also from my reading of the document so you get all VLANs. I do not have one to play with at the moment so am strictly going off of the docs.<br><br>The server should be a server role port type from my understanding.<br><br>This was meant to be a low-price/simplistic switch without many features to play with.<br><br><div style="font-family: times new roman,new york,times,serif; font-size: 12pt;"><div>----- Original Message ----<br>From: pedro marques <pmarques74@gmail.com><br>To: cisco-voip@puck.nether.net<br>Sent: Monday, April 17, 2006 3:38:47 PM<br>Subject: [cisco-voip] Catalyst Express
500<br><br>Hi, <br> <br>I have a cisco router configured for dot1q trunking [data vlan (VLAN1) + voice vlan(VLAN2)] on fastethernet0/0 interface. This interface is going to connect to a switchport in the catex500. which role should I assign in the catex500 config? router? switch? <br><br>How much as I try different roles I never manage to see the attribution of more than one vlan in the trunk between the switch and the router. I think the switch should recognize the 802.1Q configuration on the router side. Don't know what else to try. <br> <br>In this same switch I am going to connect a CCM. Once again which role should be assigned to it? ip phone + desktop? server? other? <br> <br>thanks in advance <br> <br>regards <br> <br>-- <br>Pedro Miguel Marques <div>_______________________________________________<br>cisco-voip mailing list<br>cisco-voip@puck.nether.net<br><a target="_blank"
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br></div></div></div></div></body></html>