<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-7" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<br>
Hi Konstantin,<br>
keep in mind that 0/1/0 and 0/1/1 are configured from the telco as
point-to-point setup!! Only 0/1/1 is always active!! 0/1/0 seems
deactiveted!!<br>
Also, last Wednsday i asked the Telco for the 0/2/0 and 0/2/1 to have
layer 1 always Up, since they are not point-to-point and they said OK.
they did and for 5 days Layer 1 was active and i had no problem with
the dialpeers. This morning they were deactivated, i called them and
told them again that i want them always Up, and they reset them!! I
can't keep my mind each day if they are up and if not call the telco to
fix them!!<br>
Since 0/1/0 is p-t-p as 0/1/1 why it does have the same problem as
0/2/0 and 0/2/1<br>
<br>
Bearer cap speech had to be configured since without this command,
ipphones with VTAdvantage could not initiate voice calls through the
Vgateways.<br>
<br>
isdn switch-type basic-net3<br>
!<br>
interface BRI0/1/0<br>
no ip address<br>
isdn switch-type basic-net3<br>
isdn overlap-receiving<br>
isdn tei-negotiation first-call<br>
isdn point-to-point-setup<br>
isdn incoming-voice voice<br>
isdn static-tei 0<br>
!<br>
interface BRI0/1/1<br>
no ip address<br>
isdn switch-type basic-net3<br>
isdn overlap-receiving<br>
isdn point-to-point-setup<br>
isdn incoming-voice voice<br>
isdn static-tei 0<br>
!<br>
interface BRI0/2/0<br>
no ip address<br>
isdn switch-type basic-net3<br>
isdn overlap-receiving<br>
isdn incoming-voice voice<br>
!<br>
interface BRI0/2/1<br>
no ip address<br>
isdn switch-type basic-net3<br>
isdn overlap-receiving<br>
isdn incoming-voice voice<br>
!<br>
..............................................................................<br>
voice-port 0/1/0<br>
translation-profile incoming TP01<br>
compand-type a-law<br>
bearer-cap Speech<br>
!<br>
voice-port 0/1/1<br>
translation-profile incoming TP01<br>
compand-type a-law<br>
bearer-cap Speech<br>
!<br>
voice-port 0/2/0<br>
translation-profile incoming TP01<br>
compand-type a-law<br>
bearer-cap Speech<br>
!<br>
voice-port 0/2/1<br>
translation-profile incoming TP01<br>
compand-type a-law<br>
bearer-cap Speech<br>
!<br>
.................................................................................<br>
dial-peer voice 1 pots<br>
<br>
Regards<br>
Anthony<br>
<br>
Fedorov, Konstantin wrote:
<blockquote
cite="mid8B5577ED1D5D2F4AA0E4651EC41C6DC70647C5AB@amthqex01.amt.ru"
type="cite">
<meta http-equiv="Content-Type" content="text/html; ">
<meta name="Generator" content="Microsoft Word 11 (filtered medium)">
<!--[if !mso]>
<style>
v\:* {behavior:url(#default#VML);}
o\:* {behavior:url(#default#VML);}
w\:* {behavior:url(#default#VML);}
.shape {behavior:url(#default#VML);}
</style>
<![endif]-->
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman";
color:black;}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
p
{mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman";
color:black;}
tt
{font-family:"Courier New";}
span.EmailStyle20
{mso-style-type:personal;
font-family:Arial;
color:navy;}
span.EmailStyle21
{mso-style-type:personal-reply;
font-family:Arial;
color:navy;}
@page Section1
{size:595.3pt 841.9pt;
margin:2.0cm 42.5pt 2.0cm 3.0cm;}
div.Section1
{page:Section1;}
-->
</style><!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
<div class="Section1">
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Hi,
<o:p></o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Well,
<o:p></o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Can
you send a BRI config
to this list ??<o:p></o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Do
you talk with provider
to activate BRI always ? I suppose that provider configure ISDN BUS,<o:p></o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Is
this possible configure
p2p ISDN ??<o:p></o:p></span></font></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><o:p> </o:p></span></font></p>
<div>
<p><font color="black" face="Times New Roman" size="2"><span
style="font-size: 10pt;">-----------------------<br>
Sincerely Yours,<br>
Konstantin Fedorov</span></font><o:p></o:p></p>
</div>
<div>
<div class="MsoNormal" style="text-align: center;" align="center"><font
color="black" face="Times New Roman" size="3"><span
style="font-size: 12pt; color: windowtext;">
<hr tabindex="-1" align="center" size="2" width="100%"></span></font></div>
<p class="MsoNormal"><b><font color="black" face="Tahoma" size="2"><span
style="font-size: 10pt; font-family: Tahoma; color: windowtext; font-weight: bold;">From:</span></font></b><font
color="black" face="Tahoma" size="2"><span
style="font-size: 10pt; font-family: Tahoma; color: windowtext;">
Anthony Kouloglou [<a class="moz-txt-link-freetext" href="mailto:akoul@dataways.gr">mailto:akoul@dataways.gr</a>] <br>
<b><span style="font-weight: bold;">Sent:</span></b> Tuesday, April
25, 2006 5:42
PM<br>
<b><span style="font-weight: bold;">To:</span></b> Fedorov, Konstantin<br>
<b><span style="font-weight: bold;">Cc:</span></b>
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck-nether.net">cisco-voip@puck-nether.net</a><br>
<b><span style="font-weight: bold;">Subject:</span></b> Re:
[cisco-voip] Why do
my dialpeer pots are not active?</span></font><font color="black"><span
style="color: windowtext;"><o:p></o:p></span></font></p>
</div>
<p class="MsoNormal"><font color="black" face="Times New Roman"
size="3"><span style="font-size: 12pt;"><o:p> </o:p></span></font></p>
<p class="MsoNormal"><font color="black" face="Times New Roman"
size="3"><span style="font-size: 12pt;">Hi,<br>
thanks a lot. I have seen that link, i tried the command "isdn
tei-negotiation first call"</span></font><tt><font face="Courier New"
size="2"><span style="font-size: 10pt;"> </span></font></tt><span
class="modulecontent">but it didn't work. </span><br>
I don't think that it is a problem of the BRI but of the Dial-peer.<br>
As soon soon as the Layer 1 gets deactivated, the show dialplan number
xxx
command is working for a few more minutes!!! And then, as if there is
timeout
or somethng like that, the dialpeer is not found and so no calls can be
made
from the specific dialpeer!!<br>
<br>
Also, don't forget that i am always capable of making an isdn test call
and
bring the interface in an Active mode. That is why i don't think that
it has
something to do with the bri configuration.<br>
<br>
Regards,<br>
Anthony Kouloglou<br>
<br>
Fedorov, Konstantin wrote: <o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><!--[if gte mso 9]><xml>
<u1:shapedefaults u2:ext="edit" spidmax="1026"/>
</xml><![endif]--><!--[if gte mso 9]><xml>
<u3:shapelayout u4:ext="edit">
<u3:idmap u4:ext="edit" data="1"/>
</u3:shapelayout>
</xml><![endif]-->Hi,<u5:p></u5:p></span></font><o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><u5:p> </u5:p></span></font><o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">This
is normal. When ISDN
L1 deactivated, pots dial-peer not active<u5:p></u5:p></span></font><o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><u5:p> </u5:p></span></font><o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US">Try
this solution<u5:p></u5:p></span></font><o:p></o:p></p>
<p class="MsoNormal"><font color="navy" face="Arial" size="2"><span
style="font-size: 10pt; font-family: Arial; color: navy;" lang="EN-US"><a
href="http://www.ciscotaccc.com/kaidara-advisor/accessdial/showcase?case=K23095837">http://www.ciscotaccc.com/kaidara-advisor/accessdial/showcase?case=K23095837</a><u5:p></u5:p></span></font><o:p></o:p></p>
<div>
<p><font color="navy" face="Times New Roman" size="2"><span
style="font-size: 10pt; color: navy;">-----------------------<br>
Sincerely Yours,<br>
Konstantin Fedorov</span></font><u5:p></u5:p><o:p></o:p></p>
</div>
<div>
<div class="MsoNormal" style="text-align: center;" align="center"><font
color="black" face="Times New Roman" size="3"><span
style="font-size: 12pt; color: windowtext;">
<hr tabindex="-1" align="center" size="2" width="100%"></span></font></div>
<p class="MsoNormal"><b><font color="black" face="Tahoma" size="2"><span
style="font-size: 10pt; font-family: Tahoma; color: windowtext; font-weight: bold;">From:</span></font></b><font
color="black" face="Tahoma" size="2"><span
style="font-size: 10pt; font-family: Tahoma; color: windowtext;"> <a
href="mailto:cisco-voip-bounces@puck.nether.net">cisco-voip-bounces@puck.nether.net</a>
[<a href="mailto:cisco-voip-bounces@puck.nether.net">mailto:cisco-voip-bounces@puck.nether.net</a>]
<b><span style="font-weight: bold;">On Behalf Of </span></b>Anthony
Kouloglou<br>
<b><span style="font-weight: bold;">Sent:</span></b> Tuesday, April
25, 2006 1:51
PM<br>
<b><span style="font-weight: bold;">To:</span></b> <a
href="mailto:cisco-voip@puck-nether.net">cisco-voip@puck-nether.net</a><br>
<b><span style="font-weight: bold;">Subject:</span></b> [cisco-voip]
Why do my
dialpeer pots are not active?</span></font><o:p></o:p></p>
</div>
<u5:p></u5:p>
<p class="MsoNormal"><font color="black" face="Times New Roman"
size="3"><span style="font-size: 12pt;"><u5:p> </u5:p><o:p></o:p></span></font></p>
<p class="MsoNormal"><tt><font color="black" face="Courier New"
size="2"><span style="font-size: 10pt;">Hi all,</span></font></tt><font
face="Courier New" size="2"><span
style="font-size: 10pt; font-family: "Courier New";"><br>
<tt><font face="Courier New">i am running 12.3.14T7 spservices early
deployment
ios on a 2811 router (but i also faced the same problem with other non
deferred
12.3 ios in 2801 routers).</font></tt><br>
<tt><font face="Courier New">-There are 4 BRIs on that router. </font></tt><br>
<tt><font face="Courier New">-The <b><i><span
style="font-weight: bold; font-style: italic;">show isdn status</span></i></b>
shows that Layer 1 is <b><i><span
style="font-weight: bold; font-style: italic;">DEACTIVATED</span></i></b>.</font></tt><br>
<tt><font face="Courier New">-The <b><span style="font-weight: bold;">show
dialplan number xxxx</span></b> does not match any dialpeer (even
though there
are 4 dialpeer pots, one for each voice-port) and so i cannot have any
outside
call </font></tt><br>
<tt><font face="Courier New">-When i issue the command <b><i><span
style="font-weight: bold; font-style: italic;">isdn test call
interface bri 0/x/x
<number></span></i></b>, the interface status gets up (<b><span
style="font-weight: bold;">Layer 1 also</span></b>) and the router's
dialplan is
working now with no problem. Even the command <b><i><span
style="font-weight: bold; font-style: italic;">show dialplan number xxx</span></i></b>
shows the match
to each dialpeer now,</font></tt><br>
<tt><font face="Courier New">-After a while, the Layer 1 gets
deactiveted and
the dialpeer fail to match again and so i do not have outside calls!!</font></tt><br>
<br>
<tt><font face="Courier New">Is this a bug of the new IOS? I don't
think that
this behaviour occured at oldest IOSs</font></tt><br>
<br>
<tt><font face="Courier New">Thanks</font></tt><br>
<tt><font face="Courier New">Anthony</font></tt></span></font><u5:p></u5:p><o:p></o:p></p>
</div>
</blockquote>
</body>
</html>