<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-7" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
<tt>Thanks Erik,<br>
that is it!!! And yes i did not have problems with inbound calls!!<br>
<br>
Regards,<br>
Anthony<br>
</tt><br>
Erik Goppel wrote:
<blockquote
cite="mid47fb51250604260535y48b69cedp25bd306ca7285478@mail.gmail.com"
type="cite">
<div>Try this one, </div>
<div> </div>
<div>no dial-peer outbound status-check pots<br>
</div>
<div>this way your L1 will come up if you try to make the call, if
you don`t your pots will not come up and you can`t make the call.</div>
<div>This method discards checking the BRI status, and will setup the
call.</div>
<div> </div>
<div>I guess you don`t have the problem when you have an inbound call?</div>
<div><br>
Grtz</div>
<div> </div>
<div> </div>
<div> </div>
<div>Erik Goppel</div>
<br>
<br>
<div><span class="gmail_quote">2006/4/25, Anthony Kouloglou <<a
href="mailto:akoul@dataways.gr">akoul@dataways.gr</a>>:</span>
<blockquote class="gmail_quote"
style="border-left: 1px solid rgb(204, 204, 204); margin: 0px 0px 0px 0.8ex; padding-left: 1ex;">
<div style="direction: ltr;"><tt>Hi all,<br>
i am running 12.3.14T7 spservices early deployment ios on a 2811 router
(but i also faced the same problem with other non deferred 12.3 ios in
2801 routers).<br>
-There are 4 BRIs on that router. <br>
-The <i><b>show isdn status</b></i> shows that Layer 1 is <i><b>DEACTIVATED</b></i>.<br>
-The <b>show dialplan number xxxx</b> does not match any dialpeer </tt><tt>(even
though there are 4 dialpeer pots, one for each voice-port)
</tt><tt> and so i cannot have any outside call <br>
-When i issue the command <i><b>isdn test call interface bri 0/x/x
<number></b></i>, the interface status gets up (<b>Layer 1 also</b>)
and the router's dialplan is working now with no problem. Even the
command <i><b>show dialplan number xxx</b></i> shows the match to each
dialpeer now,<br>
-After a while, the Layer 1 gets deactiveted and the dialpeer fail to
match again and so i do not have outside calls!!<br>
<br>
Is this a bug of the new IOS? I don't think that this behaviour occured
at oldest IOSs
<br>
<br>
Thanks<br>
Anthony<br>
</tt></div>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
<a onclick="return top.js.OpenExtLink(window,event,this)"
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>
<a onclick="return top.js.OpenExtLink(window,event,this)"
href="https://puck.nether.net/mailman/listinfo/cisco-voip"
target="_blank">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
<br>
<br>
<br>
</blockquote>
</div>
<br>
</blockquote>
</body>
</html>