<br><font size=2 face="sans-serif">Jason,</font>
<br>
<br><font size=2 face="sans-serif">Everyone of our gateways are setup this
way. and thus far no problems. For that matter we find it easier
to do it this way then to control the T1's via MGCP</font>
<br>
<br><font size=2 face="sans-serif">Craig<br>
</font>
<br>
<br>
<br>
<table width=100%>
<tr valign=top>
<td width=40%><font size=1 face="sans-serif"><b>"Jason Aarons \(US\)"
<jason.aarons@us.didata.com></b> </font>
<br><font size=1 face="sans-serif">Sent by: cisco-voip-bounces@puck.nether.net</font>
<p><font size=1 face="sans-serif">05/23/2006 06:43 PM</font>
<td width=59%>
<table width=100%>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">To</font></div>
<td><font size=1 face="sans-serif"><cisco-voip@puck.nether.net></font>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">cc</font></div>
<td>
<tr valign=top>
<td>
<div align=right><font size=1 face="sans-serif">Subject</font></div>
<td><font size=1 face="sans-serif">Re: [cisco-voip] T.37 OffRamp Faxing
Using Cisco 3825 Router and UnityIP
Fax Service</font></table>
<br>
<table>
<tr valign=top>
<td>
<td></table>
<br></table>
<br>
<br>
<br><tt><font size=2>I have similar configuration, FXS are MGCP controlled
and T1 are H323<br>
controlled.<br>
<br>
TAC advised I not do this, as the MGCP "Trombone" will overwrite
any<br>
H323 config stuff. I asked the Ciscc TAC SE where in the SRND or
on CCO<br>
it talks about or advised not to mix MGCP/H323, he said it not posted.<br>
<br>
I too would like more info, as I have it working, but they say don't do<br>
this!<br>
<br>
I need H323 for T38/XMedius Fax and MGCP FXS for centralized dialplan.<br>
Will MGCP ever get T38 with XMedius support? Will H323 ever get Calling<br>
Party Name in the right information element (display ie vs facility ie)?<br>
<br>
<br>
-----Original Message-----<br>
From: cisco-voip-bounces@puck.nether.net<br>
[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Jose Mujica<br>
Sent: Tuesday, May 23, 2006 12:45 AM<br>
To: cisco-voip@puck.nether.net<br>
Subject: [cisco-voip] T.37 OffRamp Faxing Using Cisco 3825 Router and<br>
UnityIP Fax Service<br>
<br>
Hi. I already have a Cisco 3825 with 2 T1/PRI with a Cisco CallManager<br>
cluster<br>
already using MGCP. Now the client would like the ability to<br>
send/received<br>
faxes from the desktop. I know T.37 OffRamp works with H323 but can I<br>
have<br>
MGCP on the router for the 2 T1/PRI and then configure H323 on the same<br>
router<br>
for the 3rd T1/PRI to be use for incoming/outgoing fax using T.37??? Can<br>
both<br>
protocols be configured on the same router without any problems? I<br>
haven't<br>
test it out yet.<br>
<br>
Any ideas?<br>
<br>
Thanks in advanced,<br>
-Jose<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
<br>
-----------------------------------------<br>
Disclaimer:<br>
<br>
This e-mail communication and any attachments may contain<br>
confidential and privileged information and is for use by the<br>
designated addressee(s) named above only. If you are not the<br>
intended addressee, you are hereby notified that you have received<br>
this communication in error and that any use or reproduction of<br>
this email or its contents is strictly prohibited and may be<br>
unlawful. If you have received this communication in error, please<br>
notify us immediately by replying to this message and deleting it<br>
from your computer. Thank you.<br>
<br>
<br>
_______________________________________________<br>
cisco-voip mailing list<br>
cisco-voip@puck.nether.net<br>
https://puck.nether.net/mailman/listinfo/cisco-voip<br>
</font></tt>
<br>