<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD><TITLE>Direct Dialing a trunk</TITLE>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.2873" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>There was an issue in 3.x that prevented trunks from being in
different route groups (or perhaps it wouldn't allow you to assign a trunk to a
pattern that was already assigned to a group), so I had to create a seperate
route group for each trunk and then create a set of test patterns that would be
routed to a specific route list which would test only one trunk.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I'll bet in 4.1 you can create a route pattern and assign a
trunk for that pattern itself.</FONT></DIV>
<DIV> </DIV>
<DIV>--------------------------------------------------------------------------------<BR>Lelio
Fulgenzi, B.A.<BR>Network Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1<BR>(519) 824-4120 x56354 (519) 767-1060 FAX
(JNHN)<BR>^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
<BR>Sanity First : Number of days with fewer than<BR>50 messages in my inbox at
the end of the day: buffer overrun</DIV>
<BLOCKQUOTE
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B>
<A title=JOlson@mlnusa.com href="mailto:JOlson@mlnusa.com">Olson, Jeffrey</A>
</DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A title=cisco-voip@puck.nether.net
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, May 23, 2006 12:51
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> [cisco-voip] Direct Dialing a
trunk</DIV>
<DIV><BR></DIV><!-- Converted from text/rtf format -->
<P><FONT face=Arial size=2>I need to find out how to direct dial a trunk on a
Cisco 4.1 call manager. Does anyone have any ideas?</FONT> </P><BR>
<P><FONT face=Arial size=2>Jeff</FONT> </P>
<P><SPAN
style="FONT-SIZE: 8pt; FONT-FAMILY: 'Arial'">********************************************************************</SPAN></P>
<P><SPAN style="FONT-SIZE: 8pt; FONT-FAMILY: 'Arial'">CONFIDENTIALITY
NOTICE:</SPAN></P>
<P><SPAN style="FONT-SIZE: 8pt; FONT-FAMILY: 'Arial'">This E-mail transmission
contains information from Mortgage Lenders Network USA, Inc. which is
confidential and legally privileged. The information is intended only for the
use of the individual or entity named on this E-mail. If you are not the
intended recipient, you are hereby notified that disclosing, copying,
distributing, or taking any action in reliance on the contents of this
information is strictly prohibited, and that the E-mail should be returned to
this company immediately. If you have received this E-mail in error, please
contact the sender immediately.</SPAN></P>
<P><SPAN style="FONT-SIZE: 8pt; FONT-FAMILY: 'Arial'"></SPAN> </P>
<P>
<HR>
<P></P>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE></BODY></HTML>