<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
<DIV id=idOWAReplyText61113 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Hi Anthony</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>I need to do exactly the same but could not
get it working immediately. I will go back to the lab again. I suspect it is
because my MOH in multicast mode was not working at my HQ. It was in unicast
mode. I did manage to get the MOH for CME fallback mode working and in fallback
mode it is working but when the site s wan link is up I can not get MOH - just
tone on hold. My branch is using g711 for voice in the branch and G729 across
the wan to HQ. Apart from getting the MOH at HQ working - are there any special
tricks - Do I need MOH at HQ in G711 or G729 mode or does it not matter - I.E a
g729 region for my MOH to make sure the MOH signalling to fool the phones into
listening to the stream at the branch etc or does it work irrespective of the
codec at HQ.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Another question - the MOH sample file for
a branch - is it a G711 or G729 ??</FONT></DIV></DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>The one thing that I did was to get the branch going on MOH when in
CME fallback mode (not SRST) is the command where you tie the MOH to a loopback.
I had to also add the fast etehr IP address in the command - the same address as
my cme skinny interface</DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr> </DIV>
<DIV dir=ltr>erik<BR>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net on
behalf of Anthony Kouloglou<BR><B>Sent:</B> Wed 2006-05-31 15:32<BR><B>To:</B>
Goran Selthofer<BR><B>Cc:</B> cisco-voip@puck-nether.net<BR><B>Subject:</B> Re:
[cisco-voip] configure IOS MOH for remote site<BR></FONT><BR></DIV>
<DIV><TT>Hi Goran,<BR>i made it work thanks to you and this link below<BR><BR><A
class=moz-txt-link-freetext
href="http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html">http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html</A></TT><BR><BR>but<BR>when
i change the .au file for a diferrent audio file, i can't stream it to the
phones unless i reload the router. Is there a way to reset the music on hold
server or something like that?<BR><BR>cheers<BR>Akoul<BR>Goran Selthofer wrote:
<BLOCKQUOTE cite="" type="cite">anthony, this MoH is active always at
multicast address...not only for srst.<BR>that it why you should limit MoH
server to one hop...because we are practicaly cheating it with moh file from
flash...<BR>let me explain:<BR>when you put someone on hold (ip phone or
external caller trough voice gateway), those devices expect to "hear" MOH on
multicast address (practically, they became memebers fo multicast
group).<BR>So, instead receiveing direct moh from MoH server (remmember, we
limited it on one hop), the devices will hear MOH file from router's flash
which will be played on 239.1.1.1 port 16384 - exactly where they are
listening... :)<BR><BR>believe me...it works fine for over 50 locations in my
installation :)<BR><BR>cu,<BR>goran<BR><BR><B><I>Anthony Kouloglou <A
class=moz-txt-link-rfc2396E
href="mailto:akoul@dataways.gr"><akoul@dataways.gr></A></I></B> wrote:
<BLOCKQUOTE class=replbq
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(16,16,255) 2px solid"><TT>Thanks
goran but,<BR>with this configuration, the MOH server is active only when
srst is active. I want that the MOH server is always active and
so:<BR>assign this IOS MOH to a media resource group list that only the
specific remote site uses.<BR>Is this
possible?<BR><BR>-akoul<BR></TT><BR>Goran Selthofer wrote:
<BLOCKQUOTE cite="" type="cite">ccm-manager
music-on-hold<BR>!<BR>call-manager-fallback<BR>�moh
music-on-hold.au<BR>�multicast moh 239.1.1.1 port 16384 route <IP
address of loopback interface> <space> <IP address of some
physical interface><BR>�<BR>you should copy file "music-on-hold.au"
to flash<BR>email me if you need this file<BR><BR>this example is for g711
MoH stream to ip phones.<BR>at the same time, you should configure one of
the servers in cluster as MoH multicast server but limit it to one
hop.<BR><BR>cu,<BR>selt<BR><BR><BR><B><I>Anthony Kouloglou <A
class=moz-txt-link-rfc2396E
href="mailto:akoul@dataways.gr"><akoul@dataways.gr></A></I></B>
wrote:
<BLOCKQUOTE class=replbq
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: rgb(16,16,255) 2px solid">Hi
all,<BR>is there documentation on how to configure a IOS to act as MOH
server <BR>(2851 series router). i just don't want the remote site to
stream to the <BR>local users music from the wan.<BR><BR>central site:
cluster with 2 ccm 4.1(3)sr3a<BR>remote sites: 3 each with 2851 series
router and
srst.<BR><BR>Thanks<BR>_______________________________________________<BR>cisco-voip
mailing list<BR><A class=moz-txt-link-abbreviated
href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</A><BR><A
class=moz-txt-link-freetext
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR></BLOCKQUOTE><BR>
<DIV></DIV>
<HR SIZE=1>
Love cheap thrills? Enjoy PC-to-Phone <A
href="http://us.rd.yahoo.com/mail_us/taglines/postman9/*http://us.rd.yahoo.com/evt=39666/*http://messenger.yahoo.com/">calls
to 30+ countries</A> for just 2¢/min with Yahoo! Messenger with Voice.
</BLOCKQUOTE></BLOCKQUOTE><BR>
<P></P>
<HR SIZE=1>
Love cheap thrills? Enjoy PC-to-Phone <A
href="http://us.rd.yahoo.com/mail_us/taglines/postman9/*http://us.rd.yahoo.com/evt=39666/*http://messenger.yahoo.com/">calls
to 30+ countries</A> for just 2¢/min with Yahoo! Messenger with Voice.
</BLOCKQUOTE></DIV>
</body>
</html>
<table><tr><td bgcolor=#ffffff><font color=#000000>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<br>
This e-mail and its contents are subject to the Telkom SA Limited<br>
e-mail legal notice available at <br>
http://www.telkom.co.za/TelkomEMailLegalNotice.PDF<br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~<br>
</font></td></tr></table>