<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>Re: [cisco-voip] VG224 / SCCP / Modem</TITLE>
</HEAD>
<BODY>
<DIV id=idOWAReplyText21009 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>This is inaccurate.
</FONT></DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>Using 4.1(3) with VG224 under
12.4T you can use modem/faxes with SCCP.</FONT></DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>I've had a VG224 with stcapp
(SCCP) running for 2 months with no issues. My VG24 is co-located on a lan
with the T1 CAS gateway. </FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Clock slips/errorrs via show controller t1
will kill modems/faxes. Check your clocking, etc.</FONT></DIV></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net on
behalf of Andrew Dignan<BR><B>Sent:</B> Tue 6/20/2006 10:01 PM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> Re: [cisco-voip] VG224 / SCCP /
Modem<BR></FONT><BR></DIV>
<DIV>
<P><FONT size=2>The VG224 using the SCCP image does not support
fax/modems:<BR><BR><A
href="http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_release_note09186a008041df56.html">http://www.cisco.com/en/US/partner/products/sw/voicesw/ps556/prod_release_note09186a008041df56.html</A><BR><BR>------------------------------------------------<BR>•Fax
and modems are not supported on FXS ports with SCCP enabled. FXS<BR>ports with
either fax or modems attached should be configured in H.323 or<BR>SIP
mode.<BR>-------------------------------------------------<BR><BR>andy
dignan<BR><BR>> You can plug a cheap analog phone into that VG224 and after
the same x<BR>> minutes get disconnected? Verify you can reproduce the
problem.<BR>><BR>> Open a TAC case, sounds like you need some debugs, SDL
traces, takes<BR>> -jason<BR>><BR>>
________________________________<BR>><BR>> From:
cisco-voip-bounces@puck.nether.net on behalf of Jeff Anderson<BR>> Sent: Tue
6/20/2006 12:50 PM<BR>> To: cisco-voip@puck.nether.net<BR>> Subject:
[cisco-voip] VG224 / SCCP / Modem<BR>><BR>><BR>>
Question:<BR>><BR>> I have a client who is using a VG224 that is
configured to use SCCP on CCM<BR>> 4.1. The majority of the ports are used
for modems but there are devices<BR>> that need skinny features as well. The
problem is the modem calls fail<BR>> after a random amount of time. It could
be anywhere from 5 - 30 minutes.<BR>> That same modem plugged directly into a
1FB will have no reliability<BR>> issues.<BR>><BR>> I have searched
Cisco's website and their forums looking for some<BR>> configuration
guidelines for modem usage and found nothing. Does anyone<BR>> have any
advice to offer?<BR>><BR>> Thanks,<BR>> Jeff
Anderson<BR>><BR>><BR>><BR>><BR>><BR>><BR>>
-----------------------------------------<BR>> Disclaimer:<BR>><BR>>
This e-mail communication and any attachments may contain<BR>> confidential
and privileged information and is for use by the<BR>> designated addressee(s)
named above only. If you are not the<BR>> intended addressee, you are
hereby notified that you have received<BR>> this communication in error and
that any use or reproduction of<BR>> this email or its contents is strictly
prohibited and may be<BR>> unlawful. If you have received this
communication in error, please<BR>> notify us immediately by replying to this
message and deleting it<BR>> from your computer. Thank you.<BR>>
_______________________________________________<BR>> cisco-voip mailing
list<BR>> cisco-voip@puck.nether.net<BR>> <A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck..nether.net/mailman/listinfo/cisco-voip</A><BR>><BR><BR>_______________________________________________<BR>cisco-voip
mailing list<BR>cisco-voip@puck.nether.net<BR><A
href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck..nether.net/mailman/listinfo/cisco-voip</A><BR></FONT></P></DIV>
</BODY>
</HTML>
<HTML><BODY><P><hr size=1></P><br>
<P><STRONG><br>
Disclaimer:<br>
<br>
This e-mail communication and any attachments may contain<br>
confidential and privileged information and is for use by the<br>
designated addressee(s) named above only. If you are not the<br>
intended addressee, you are hereby notified that you have received<br>
this communication in error and that any use or reproduction of<br>
this email or its contents is strictly prohibited and may be<br>
unlawful. If you have received this communication in error, please<br>
notify us immediately by replying to this message and deleting it<br>
from your computer. Thank you.<br>
</STRONG></P></BODY></HTML>