<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7232.36">
<TITLE> Voip application</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<BR>
<P><FONT SIZE=2 FACE="Arial">Hi all,</FONT>
<BR><FONT SIZE=2 FACE="Arial">Here its my scenario:</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I receive a call via E1 in a 3640 router with an E1 card, then via dial-peer voice XXX voip it goes to another cisco router (2801) who runs a Vxml application, but the call ends ans nothing happens. Via debug, I saw that the application starts but …..</FONT></P>
<P><FONT SIZE=2 FACE="Arial">I try the same vxml in another router directly via a dial-peer voice XXX POTS and run perfectly.</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Any ideas¿?</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">There are the configuration in the routers</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Cisco 3640:</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Dial-peer voice 123 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial">Destination-pattern 123</FONT>
<BR><FONT SIZE=2 FACE="Arial">Session target ipv4:10.10.10.1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> dtmf-relay h245-alphanumeric</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no vad</FONT>
</P>
<BR>
<P><FONT SIZE=2 FACE="Arial">Cisco 2801</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">interface Loopback0</FONT>
<BR><FONT SIZE=2 FACE="Arial"> ip address 10.10.11.1 255.255.255.0</FONT>
<BR><FONT SIZE=2 FACE="Arial">!</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 123 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> service acme</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 123</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target ipv4:10.10.11.1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> incoming called-number 123</FONT>
<BR><FONT SIZE=2 FACE="Arial"> dtmf-relay h245-alphanumeric</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no vad</FONT>
</P>
<BR>
<BR>
<P><FONT SIZE=2 FACE="Arial">Thanks in advance</FONT>
</P>
</BODY>
</HTML>