<html>
<head>
<meta http-equiv=Content-Type content="text/html; charset=us-ascii">
<meta name=Generator content="Microsoft Word 11 (filtered)">
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:Tahoma;}
a:link, span.MsoHyperlink
{color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{color:purple;
text-decoration:underline;}
span.emailstyle17
{font-family:Arial;
color:windowtext;}
span.EmailStyle18
{font-family:Arial;
color:navy;}
@page Section1
{size:595.3pt 841.9pt;
margin:1.0in 1.25in 1.0in 1.25in;}
div.Section1
{page:Section1;}
-->
</style>
</head>
<body lang=EN-GB link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>Thanks Phil, sorry the two dial-peers I
listed are outgoing dial-peers only, they are so the remote site can call HQ
using 4 digits when the WAN is down, these are the remaining dial-peers in the
config, I already have the direct-inward-dial on the dial-peer voice 9 pots the
only inbound pots dial-peer I have and the DDI numbers I was referring to
should use dial-peer voice 1 voip for inbound calls. </span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> </span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>dial-peer voice 9 pots</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> destination-pattern 9T</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> progress_ind alert enable 8</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> direct-inward-dial</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> port 0/0:15</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>!</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>dial-peer voice 100 voip</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> incoming called-number .</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> codec g711ulaw</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> no vad</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>!</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>dial-peer voice 1 voip</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> destination-pattern 5537..</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> progress_ind setup enable 3</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> translate-outgoing calling 1</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> voice-class h323 1</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> session target ipv4:…………</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> dtmf-relay h245-alphanumeric</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> codec g711ulaw</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> no vad</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>!</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>dial-peer voice 2 voip</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> preference 1</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> destination-pattern 5537..</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> progress_ind setup enable 3</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> translate-outgoing calling 1</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> voice-class h323 1</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> session target ipv4:…………</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> dtmf-relay h245-alphanumeric</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> codec g711ulaw</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> no vad</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'>!</span></font></p>
<p class=MsoNormal><font size=2 color=navy face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:navy'> </span></font></p>
<div>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span lang=EN-US style='font-size:12.0pt;font-family:
"Times New Roman"'>
<hr size=2 width="100%" align=center tabindex=-1>
</span></font></div>
<p class=MsoNormal><b><font size=2 face=Tahoma><span lang=EN-US
style='font-size:10.0pt;font-weight:bold'>From:</span></font></b><font size=2><span
lang=EN-US style='font-size:10.0pt'> Philip Walenta [mailto:pwalenta@wi.rr.com]
<br>
<b><span style='font-weight:bold'>Sent:</span></b> Thursday, June 29, 2006 1:22
PM<br>
<b><span style='font-weight:bold'>To:</span></b> Nick Kassel;
cisco-voip@puck.nether.net<br>
<b><span style='font-weight:bold'>Subject:</span></b> RE: [cisco-voip] Dialpeer
mismatch</span></font></p>
</div>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 color=blue face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:blue'>You mentioned that these are DDI numbers
for you? I'd recommend putting "direct-inward-dial" on those
peers.</span></font></p>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt;font-family:"Times New Roman"'> </span></font></p>
<p class=MsoNormal><font size=2 color=blue face=Arial><span style='font-size:
10.0pt;font-family:Arial;color:blue'>I've seen this behavior before, where some
peers have DID on them, and some don't, and incoming calls seem to prefer
non-did enabled dial-peers. My general rule of thumb is that when I have
DID on a line, all POTS peers get direct-inward-dial on them just to prevent
problems (or to prevent someone from getting dial-tone accidentally).</span></font></p>
<blockquote style='border:none;border-left:solid blue 1.5pt;padding:0in 0in 0in 4.0pt;
margin-left:3.75pt;margin-top:5.0pt;margin-right:0in;margin-bottom:5.0pt'>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt;font-family:"Times New Roman"'> </span></font></p>
<div class=MsoNormal align=center style='text-align:center'><font size=3
face="Times New Roman"><span lang=EN-US style='font-size:12.0pt;font-family:
"Times New Roman"'>
<hr size=2 width="100%" align=center tabIndex=-1>
</span></font></div>
<p class=MsoNormal style='margin-bottom:12.0pt'><b><font size=2 face=Tahoma><span
lang=EN-US style='font-size:10.0pt;font-weight:bold'>From:</span></font></b><font
size=2><span lang=EN-US style='font-size:10.0pt'>
cisco-voip-bounces@puck.nether.net [mailto:cisco-voip-bounces@puck.nether.net] <b><span
style='font-weight:bold'>On Behalf Of </span></b>Nick Kassel<br>
<b><span style='font-weight:bold'>Sent:</span></b> Thursday, June 29, 2006 7:07
AM<br>
<b><span style='font-weight:bold'>To:</span></b> cisco-voip@puck.nether.net<br>
<b><span style='font-weight:bold'>Subject:</span></b> [cisco-voip] Dialpeer
mismatch</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>We had an issue with a new installation of a remote site
today, they have a PRI E1 on a 1760 router with a range of DDI numbers.</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>When I added the following dial peers to allow 4 digit
dialling when the WAN is down across SRST we came across a problem. When in
SRST the 4 digit dialling worked fine.</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>dial-peer voice 2000 pots</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>destination-pattern 2…</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>prefix 02079532</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>port 0/0:15</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>dial-peer voice 6000 pots</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>destination-pattern 6…</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>prefix 02071496</span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>port 0/0:15</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>The issue we had was that now any inbound calls originating
from 207 XXX XXXX fail, the calls came in to the router and there were no
errors on the debug then you received a dialtone after hanging up the debug
would show the call clearing down as you would expect. Any other calls from
other area codes were fine.</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Obviously the 2 prefix being presented was mismatching with
the destination-pattern 2… in the dial-peer voice 2000 pots dial peer. </span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=2 face=Arial><span style='font-size:10.0pt;
font-family:Arial'>Is there anyway I can get round as we would very much like
to have these dial-peers in.</span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal><font size=3 face=Tahoma><span style='font-size:12.0pt'> </span></font></p>
<p class=MsoNormal style='margin-bottom:12.0pt'><font size=3
face="Times New Roman"><span style='font-size:12.0pt;font-family:"Times New Roman"'> </span></font></p>
<table class=MsoNormalTable border=0 cellpadding=0 bgcolor=white
style='background:white'>
<tr>
<td style='padding:.75pt .75pt .75pt .75pt'>
<p class=MsoNormal><font size=3 color=black face="Times New Roman"><span
style='font-size:12.0pt;font-family:"Times New Roman";color:black'><br>
***********************************************************************************************<br>
<br>
The information contained in this e-mail is strictly confidential, some or all<br>
of which may be legally privileged. It is for the intended recipient only.<br>
Access to this e-mail by any other person is prohibited. If you are not the<br>
intended recipient, any use, disclosure, copying, printing, distribution of,<br>
replying to or any action taken or omitted to be taken in reliance on this<br>
e-mail, is prohibited and may be unlawful. Please contact the sender immediately<br>
should this e-mail have been incorrectly addressed or transmitted.<br>
<br>
You accept that any instructions are deemed to have been given at the time the<br>
recipient(s) accesses them and that delivery receipt does not constitute<br>
acknowledgement or receipt by the intended recipient(s). You accept that there<br>
may be a delay in processing the instructions received from e-mails after<br>
Charles Stanley has received them. You are advised that urgent, time sensitive<br>
and confidential communications should not be sent by e-mail. <br>
<br>
You acknowledge that e-mails are not secure and you accept the risk of<br>
malfunction, viruses, unauthorised interference, mis-delivery or delay.<br>
************************************************************************************************<br>
<br>
<br>
Charles Stanley & Co. Ltd<br>
Registered Office: 25 Luke Street London EC2A 4AR<br>
<br>
Tel: 0207 739 8200 Fax: 0207 739 7798<br>
Registered in England No. 1903304<br>
<br>
Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd<br>
<br>
Authorised and Regulated by the Financial Services Authority, Member of the<br>
London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<br>
Options Exchange.<br>
<br>
This footnote also confirms that this email message has been swept by McAfee<br>
VirusScan and SurfControl Email Filter software.</span></font></p>
</td>
</tr>
</table>
<p class=MsoNormal><font size=3 face="Times New Roman"><span style='font-size:
12.0pt;font-family:"Times New Roman"'> </span></font></p>
</blockquote>
</div>
<br><br><table bgcolor=white style="color:black"><tr><td><br>***********************************************************************************************<br>
<br>
The information contained in this e-mail is strictly confidential, some or all<br>
of which may be legally privileged. It is for the intended recipient only.<br>
Access to this e-mail by any other person is prohibited. If you are not the<br>
intended recipient, any use, disclosure, copying, printing, distribution of,<br>
replying to or any action taken or omitted to be taken in reliance on this<br>
e-mail, is prohibited and may be unlawful. Please contact the sender immediately<br>
should this e-mail have been incorrectly addressed or transmitted.<br>
<br>
You accept that any instructions are deemed to have been given at the time the<br>
recipient(s) accesses them and that delivery receipt does not constitute<br>
acknowledgement or receipt by the intended recipient(s). You accept that there<br>
may be a delay in processing the instructions received from e-mails after<br>
Charles Stanley has received them. You are advised that urgent, time sensitive<br>
and confidential communications should not be sent by e-mail. <br>
<br>
You acknowledge that e-mails are not secure and you accept the risk of<br>
malfunction, viruses, unauthorised interference, mis-delivery or delay.<br>
************************************************************************************************<br>
<br>
<br>
Charles Stanley & Co. Ltd<br>
Registered Office: 25 Luke Street London EC2A 4AR<br>
<br>
Tel: 0207 739 8200 Fax: 0207 739 7798<br>
Registered in England No. 1903304<br>
<br>
Charles Stanley Sutherlands and Charles Stanley Securities are divisions of Charles Stanley & Co. Ltd<br>
<br>
Authorised and Regulated by the Financial Services Authority, Member of the<br>
London Stock Exchange, International Securities Markets Association, and The London International Financial Futures &<br>
Options Exchange.<br>
<br>
This footnote also confirms that this email message has been swept by McAfee<br>
VirusScan and SurfControl Email Filter software.<br>
</td></tr></table></body>
</html>