<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7232.36">
<TITLE>[cisco-voip] IVR voip</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/rtf format -->
<P><FONT SIZE=2 FACE="Arial">Hi all,</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">I just make an application with VXML, and when I test it with an dial-peer pots, via ISDN it works well, but when I try to test it with a dialpeer voip, it doesnīt works the call finish and I donīt Know why.</FONT></P>
<P><FONT SIZE=2 FACE="Arial">Tis is the scenario:</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">1 router A cisco with a ISDN line, </FONT>
<BR><FONT SIZE=2 FACE="Arial">1 router B who runs the VXML</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">In router A:</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">dial-peer voice 1000 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 1000</FONT>
<BR><FONT SIZE=2 FACE="Arial"> session target ipv4:10.10.10.1</FONT>
<BR><FONT SIZE=2 FACE="Arial"> dtmf-relay h245-alphanumeric</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no vad</FONT>
</P>
<BR>
<P><FONT SIZE=2 FACE="Arial">In router B</FONT>
<BR><FONT SIZE=2 FACE="Arial">dial-peer voice 1000 voip</FONT>
<BR><FONT SIZE=2 FACE="Arial"> service acme</FONT>
<BR><FONT SIZE=2 FACE="Arial"> destination-pattern 1000</FONT>
<BR><FONT SIZE=2 FACE="Arial"> incoming called-number 1000</FONT>
<BR><FONT SIZE=2 FACE="Arial"> dtmf-relay h245-alphanumeric</FONT>
<BR><FONT SIZE=2 FACE="Arial"> codec g711ulaw</FONT>
<BR><FONT SIZE=2 FACE="Arial"> no vad</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Any ideas??</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Thanks in advance</FONT>
</P>
<P><FONT SIZE=2 FACE="Arial">Carlos J.</FONT>
</P>
</BODY>
</HTML>