<DIV> </DIV>
<DIV>I check the "Release to Switch" , not "Supervise Transfer" ,but it can't display caller ID normally.</DIV>
<DIV> </DIV>
<DIV> </DIV><SPAN ></SPAN>
<DIV> </DIV>
<DIV> </DIV>
<DIV> </DIV>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #a0c6e5 2px solid; MARGIN-RIGHT: 0px">
<HR color=#a0c6e5 SIZE=1>
<BR>-----原始邮件-----<BR>发件人:"Robert Harvey" <ROHARVEY@FLEMINGC.ON.CA><BR>发送时间:2006-07-06 21:46:54<BR>收件人:"" <CISCO-VOIP@PUCK.NETHER.NET><BR>抄送:(无)<BR>主题:Re: [cisco-voip] can't display caller ID normally<BR><BR><BR><PRE style="WIDTH: 100%; WORD-WRAP: break-word">It sounds as though you are supervising the transfer to your
subscribers. Goto the "Call Transfer" page of a subscriber and check
whether you have "Release to Switch" or "Supervise Transfer" under the
Transfer Type section. If it is set to Supervise, test using Rlease to
Switch on a subscriber to make sure it works as needed. You can use
Bulk Edit to change this for all subscribers if it ends up working for
you.
Robert.
Message: 5
Date: Thu, 6 Jul 2006 10:37:54 +0800 (CST)
From: " ??? " <king-1195@163.com>
Subject: [cisco-voip] can't display caller ID normally
To: cisco-voip@puck.nether.net
Message-ID: <44AC7782.000021.10298@bj163app56.163.com>
Content-Type: text/plain; charset="gb2312"
I configure AutoAttendant through call router and call handler in unity
,but the caller number can't display and it prompts "From Voicemail" on
phone before the call is picked up.And after picking up it,the caller
number is display normally . Why ?
Configuration step:
1. set CTI route point with line 3888(DID) in CCM
2. On line 3888, all call is forward to voicemail
3. On Unity?set call routing: all call ,which calling number is on
voicemail pilot, is send to greetings Administrator
4. On unity, set call handlers:Opening Greeting & Operater
Opening Greeting:call input 0 to send call to operater call handler
Operater:transfer all call to reception extension 3800
What'wrong with my configuration ? and better configuration for me ?
I post the question on CISCO forum ,but it can't reslove until now.So I
hope it can reslove here.
<A href="http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddb95c7" target=_new>http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=IP%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddb95c7</A>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
https://puck.nether.net/pipermail/cisco-voip/attachments/20060706/2d1a9fba/attachment-0001.html
----------------------------------------------------------------
Robert Harvey
Network Support Analyst
Fleming College
Peterborough, ON, Canada
Office (705) 749-5513
Fax (705) 749-5540
experience.success
----------------------------------------------------------------
_______________________________________________
cisco-voip mailing list
cisco-voip@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
</PRE><!-- CoreMail Version 2.5 Copyright (c) 2002-2006 www.mailtech.cn --></BLOCKQUOTE><br><!-- footer --><br><br><br><br><br><div style="border-bottom:1px solid #999"></div><br>
<font color="black" style="font-size:14.8px"><a href="http://adfarm.mediaplex.com/ad/ck/4080-35044-9511-39?cn=netease;textlink0705;hp" target="_blank">半 价 夏 日 特 卖，上 易 趣 !</a></font>
<br>