<HTML><HEAD><TITLE>RE: [cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXOCaller-ID</TITLE></HEAD>
<BODY>
<DIV id=idOWAReplyText36272 dir=ltr>
<DIV dir=ltr><FONT face=Arial color=#000000 size=2>heres a sample:</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>Cisco 2821 with 4 VIC2-4FXO running c2800nm-spservicesk9-mz.123-14.T7.bin</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2>voice-card 0<BR> codec complexity flex reservation-fixed medium<BR> dspfarm<BR> dsp services dspfarm<BR>!<BR>!<BR>voice call send-alert<BR>voice call carrier capacity active<BR>voice rtp send-recv<BR>voice dsp release early<BR>!<BR>voice service pots <BR>!<BR>voice service voip <BR> fax protocol pass-through g711ulaw<BR> h323<BR> modem passthrough nse codec g711ulaw<BR>!<BR>!<BR>voice class codec 1<BR> codec preference 1 g711ulaw<BR> codec preference 2 g728<BR>!<BR>!<BR>!<BR>voice class h323 1<BR> h225 timeout tcp establish 3<BR>!<BR>!<BR>voice-port 0/0/0<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/0/1<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/0/2<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/0/3<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/1/0<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/1/1<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/1/2<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/1/3<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/2/0<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/2/1<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/2/2<BR> connection plar 381<BR> caller-id enable<BR>!<BR>voice-port 0/2/3<BR> connection plar 241</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>caller-id enable<BR>!<BR>voice-port 0/3/0<BR> description not connected (reserved for future use)<BR>!<BR>voice-port 0/3/1<BR> description not connected (reserved for future use)<BR>!<BR>voice-port 0/3/2<BR> connection plar 837<BR> description</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!<BR>voice-port 0/3/3<BR> pre-dial-delay 0<BR> description connection to valcom 2003a page'n adapter<BR>!<BR>dial-peer voice 1 pots<BR> tone ringback alert-no-PI<BR> description For InBound POTS Calls<BR> incoming called-number .<BR> direct-inward-dial<BR>!<BR>dial-peer voice 2 voip<BR> tone ringback alert-no-PI<BR> description For InBound VoIP Calls<BR> modem passthrough nse codec g711ulaw<BR> voice-class codec 1<BR> incoming called-number .<BR> fax rate disable<BR>!<BR>dial-peer voice 100 voip<BR> tone ringback alert-no-PI<BR> description For Connection Plar To Call Manager<BR> destination-pattern 381<BR> progress_ind setup enable 3<BR> progress_ind progress enable 8<BR> progress_ind connect enable 8<BR> modem passthrough nse codec g711ulaw<BR> voice-class codec 1<BR> voice-class h323 1<BR> session target ipv4:x<BR> dtmf-relay h245-alphanumeric<BR> fax rate disable<BR> no vad<BR>!<BR>dial-peer voice 101 voip<BR> tone ringback alert-no-PI<BR> description For Connection Plar To Call Manager<BR> destination-pattern 837<BR> progress_ind setup enable 3<BR> progress_ind progress enable 8<BR> progress_ind connect enable 8<BR> modem passthrough nse codec g711ulaw<BR> voice-class codec 1<BR> voice-class h323 1<BR> session target ipv4:x<BR> dtmf-relay h245-alphanumeric<BR> fax rate disable<BR> no vad</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2>!<BR>dial-peer voice 200 voip<BR> tone ringback alert-no-PI<BR> description For Inbound Analog Lines to SRST<BR> destination-pattern 899<BR> progress_ind setup enable 3<BR> progress_ind progress enable 8<BR> progress_ind connect enable 8<BR> modem passthrough nse codec g711ulaw<BR> voice-class codec 1<BR> voice-class h323 1<BR> session target ipv4:x</FONT></DIV>
<DIV dir=ltr><FONT face=Arial size=2> dtmf-relay h245-alphanumeric<BR> no vad<BR>!<BR>dial-peer voice 99 pots<BR> description Overhead paging<BR> destination-pattern 19[0-9]<BR> port 0/3/3<BR> forward-digits 1<BR>!<BR>dial-peer voice 102 voip<BR> tone ringback alert-no-PI<BR> description For Connection Plar To Call Manager<BR> destination-pattern 841<BR> progress_ind setup enable 3<BR> progress_ind progress enable 8<BR> progress_ind connect enable 8<BR> modem passthrough nse codec g711ulaw<BR> voice-class codec 1<BR> voice-class h323 1<BR> session target ipv4:x<BR> dtmf-relay h245-alphanumeric<BR> fax rate disable<BR> no vad<BR>!<BR><BR></DIV></FONT>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2></FONT> </DIV>
<DIV dir=ltr><FONT face=Arial size=2> </DIV></FONT></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> Greg Arthmann<BR><B>Sent:</B> Mon 7/10/2006 1:38 PM<BR><B>To:</B> Frazee, Timothy<BR><B>Subject:</B> RE: [cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXOCaller-ID<BR></FONT><BR></DIV>
<DIV>
<P><FONT size=2>Have a copy of the config ?<BR><BR>Greg Arthmann<BR>Network Consultant<BR>Phone (786)554-2958<BR>www.data-corporation.com<BR>"Cisco IP Telephony Partner"<BR><BR><BR><BR><BR>-----Original Message-----<BR>From: Frazee, Timothy [<A href="mailto:Timothy_Frazee@adp.com" target=_blank>mailto:Timothy_Frazee@adp.com</A>]<BR>Sent: Mon 7/10/2006 2:29 PM<BR>To: Greg Arthmann; cisco-voip@puck.nether.net<BR>Subject: RE: [cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXOCaller-ID<BR><BR>I was able to do this with h323 (with some excellent help of course) and get caller id with name on some calls.<BR><BR><BR><BR>From: Voll, Scott<BR>Sent: Mon 7/10/2006 1:11 PM<BR>To: garthmann@data-corporation.com; cisco-voip@puck.nether.net<BR>Subject: Re: [cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXO Caller-ID<BR><BR><BR>Only with h323 to my knowledge.<BR><BR>Scott<BR><BR>--------------------------<BR>Sent from my BlackBerry Wireless Handheld<BR><BR><BR>-----Original Message-----<BR>From: cisco-voip-bounces@puck.nether.net <cisco-voip-bounces@puck.nether.net><BR>To: cisco-voip@puck.nether.net <cisco-voip@puck.nether.net><BR>Sent: Mon Jul 10 11:09:16 2006<BR>Subject: [cisco-voip] Call Manager 4.1(3) MGCP Gateway Analog FXO Caller-ID<BR><BR>Is analog FXO Caller-ID in CallManager 4.1(3)with a 2811 MGCP Gateway running 12.4x IOS a supported feature ?<BR><BR><BR>Greg Arthmann<BR>Network Consultant<BR>Phone (786)554-2958<BR>www.data-corporation.com<BR>"Cisco IP Telephony Partner"<BR><BR><BR>This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.<BR><BR></FONT></P></DIV>
<DIV><P><HR>
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
</P></DIV>
</BODY></HTML>