<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=utf-8">
<META NAME="Generator" CONTENT="MS Exchange Server version 6.5.7638.1">
<TITLE>Re: [cisco-voip] my digits are being cut off going out the gw</TITLE>
</HEAD>
<BODY>
<!-- Converted from text/plain format -->
<P><FONT SIZE=2>Could it be that it needs to go out the gw as international rather then national?<BR>
<BR>
Scott<BR>
<BR>
--------------------------<BR>
Sent from my BlackBerry Wireless Handheld<BR>
<BR>
<BR>
-----Original Message-----<BR>
From: cisco-voip-bounces@puck.nether.net <cisco-voip-bounces@puck.nether.net><BR>
To: 'Ryan Ratliff' <rratliff@cisco.com><BR>
CC: cisco-voip@puck.nether.net <cisco-voip@puck.nether.net><BR>
Sent: Fri Jul 14 14:02:36 2006<BR>
Subject: Re: [cisco-voip] my digits are being cut off going out the gw<BR>
<BR>
Right<BR>
So when I look in call manager, my route pattern is 9.011! discard predot<BR>
and that it. Nothing is set on the route list/ group. Now on cm gw config<BR>
I have<BR>
<BR>
Outbound calls<BR>
Calling line = default<BR>
Calling party sel = originator<BR>
Called party ie num = cisco<BR>
Calling party ie number = cisco<BR>
Called number plan = isdn<BR>
Calling number plan = isdn<BR>
Number of digits to strip = 0<BR>
<BR>
-----Original Message-----<BR>
From: Ryan Ratliff [<A HREF="mailto:rratliff@cisco.com">mailto:rratliff@cisco.com</A>]<BR>
Sent: Friday, July 14, 2006 4:50 PM<BR>
To: James Grace<BR>
Cc: cisco-voip@puck.nether.net<BR>
Subject: Re: [cisco-voip] my digits are being cut off going out the gw<BR>
<BR>
You need to look in CM not at the gateway. The gateway only sends <BR>
what CM tells it to.<BR>
<BR>
-Ryan<BR>
<BR>
On Jul 14, 2006, at 4:46 PM, James Grace wrote:<BR>
<BR>
For some reason we are trying to dial 011 420 737 731130 and we get a <BR>
message you have not dial enogh digits. We dial this number from <BR>
another phone system and it works just fine. In the debug the called <BR>
party number is getting cut off. What could be causing this<BR>
<BR>
<BR>
<BR>
The number they are trying to dial is: 011 420 737 731130 Here <BR>
are the<BR>
<BR>
debugs when I had them make a test call:<BR>
<BR>
<BR>
<BR>
Jul 14 18:33:08.238: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 <BR>
callref = 0x0FFA<BR>
<BR>
<BR>
<BR>
Bearer Capability i = 0x8090A2<BR>
<BR>
Standard = CCITT<BR>
<BR>
Transfer Capability = Speech<BR>
<BR>
Transfer Mode = Circuit<BR>
<BR>
Transfer Rate = 64 kbit/s<BR>
<BR>
Channel ID i = 0xA98383<BR>
<BR>
Exclusive, Channel 3<BR>
<BR>
Display i = 'Emerson'<BR>
<BR>
Calling Party Number i = 0x0181, '8906'<BR>
<BR>
Plan:ISDN, Type:Unknown<BR>
<BR>
Called Party Number i = 0xA1, '0114207377311'<BR>
<BR>
Plan:ISDN, Type:National<BR>
<BR>
Jul 14 18:33:08.282: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 <BR>
callref = 0x FFA<BR>
<BR>
Channel ID i = 0xA98383<BR>
<BR>
Exclusive, Channel 3<BR>
<BR>
Jul 14 18:33:08.574: ISDN Se0/0/0:23 Q931: RX <- PROGRESS pd = 8 <BR>
callref =<BR>
<BR>
0x8<BR>
<BR>
FA<BR>
<BR>
Progress Ind i = 0x8A81 - Call not end-to-end ISDN, may have <BR>
in-band inf<BR>
<BR>
<BR>
<BR>
Jul 14 18:33:12.862: ISDN Se0/0/1:23 Q931: RX <- CONNECT pd = 8 <BR>
callref = 0x90 D Jul 14 18:33:12.870: ISDN Se0/0/1:23 Q931: TX -> <BR>
CONNECT_ACK pd = 8 callref = x100D Jul 14 18:33:17.286: ISDN <BR>
Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 callref = 0 0FFA<BR>
<BR>
Cause i = 0x8090 - Normal call clearing Jul 14 18:33:17.310: <BR>
ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref = 0x8F A Jul 14 <BR>
18:33:17.322: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 callref <BR>
= 0x0FFA Jul 14 18:33:36.658: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT <BR>
pd = 8 callref = 0 012E<BR>
<BR>
Cause i = 0x8090 - Normal call clearing Jul 14 18:33:36.678: <BR>
ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8 callref =<BR>
<BR>
0x81<BR>
<BR>
E<BR>
<BR>
Jul 14 18:33:36.706: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8 <BR>
callref = 0x012E Jul 14 18:33:44.642: ISDN Se0/0/1:23 Q931: TX -> <BR>
DISCONNECT pd = 8 callref = 0 100C<BR>
<BR>
Cause i = 0x8090 - Normal call clearing Jul 14 18:33:44.670: <BR>
ISDN Se0/0/1:23 Q931: RX <- RELEASE pd = 8 callref = 0x90 C Jul 14 <BR>
18:33:44.678: ISDN Se0/0/1:23 Q931: TX -> RELEASE_COMP pd = 8 callref <BR>
= 0x100C Jul 14 18:33:46.162: ISDN Se0/0/1:23 Q931: TX -> SETUP pd = <BR>
8 callref = 0x100E<BR>
<BR>
<BR>
<BR>
<BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
<BR>
---<BR>
<BR>
<BR>
<BR>
---<BR>
<BR>
<BR>
_______________________________________________<BR>
cisco-voip mailing list<BR>
cisco-voip@puck.nether.net<BR>
<A HREF="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</A><BR>
</FONT>
</P>
</BODY>
</HTML>