<div>I have always been told no, this could not be done but some documentation says otherwise. Maybe the below URLs is what you are refering to:</div> <div> </div> <div><A href="http://www.cisco.com/en/US/products/ps5855/products_qanda_item0900aecd8028d2e5.shtml">http://www.cisco.com/en/US/products/ps5855/products_qanda_item0900aecd8028d2e5.shtml</A></div> <div> </div> <div><A href="http://www.cisco.com/en/US/products/hw/modules/ps2617/products_configuration_example09186a008052c920.shtml">http://www.cisco.com/en/US/products/hw/modules/ps2617/products_configuration_example09186a008052c920.shtml</A></div> <div><BR>Let us know if you make it work.</div> <div> </div> <div>Peter Casanave<BR><BR><B><I>"Jason Aarons (US)" <jason.aarons@us.didata.com></I></B> wrote:</div> <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Only issues might be clocking from different sources on the two T1s.<BR>There are
clocking limitations on the VWIC2-2MFT-T1/E1. However in<BR>general it does work, I have lots of sites with this configuration. <BR><BR>I would try and stick with a WIC1-DSU if you not sure on the telco<BR>clocking -jason<BR><BR>-----Original Message-----<BR>From: cisco-voip-bounces@puck.nether.net<BR>[mailto:cisco-voip-bounces@puck.nether.net] On Behalf Of Chris Ellington<BR>Sent: Monday, July 17, 2006 10:30 AM<BR>To: cisco-voip@puck.nether.net<BR>Subject: [cisco-voip] Using VWIC-2MFT card with voice and data<BR><BR>I know it hasn't been supported to use a 2MFT card with one port T1 data<BR>and the other port PRI but I seem to remember seeing a doc stating that<BR>it was supported.<BR><BR>At present, my TAC engineer thinks I nuts and can't find the doc. <BR><BR>Anyone on the list recall seeing this?<BR><BR>Thanks!<BR><BR>Chris<BR><BR>-- <BR>Christopher S. Ellington<BR>CCIE #6814<BR>Network Solutions, Inc.<BR>(317) 566
8897<BR>Chris.Ellington@nsi1.com<BR><BR><BR>_______________________________________________<BR>cisco-voip mailing list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR><BR>-----------------------------------------<BR>Disclaimer:<BR><BR>This e-mail communication and any attachments may contain<BR>confidential and privileged information and is for use by the<BR>designated addressee(s) named above only. If you are not the<BR>intended addressee, you are hereby notified that you have received<BR>this communication in error and that any use or reproduction of<BR>this email or its contents is strictly prohibited and may be<BR>unlawful. If you have received this communication in error, please<BR>notify us immediately by replying to this message and deleting it<BR>from your computer. Thank you.<BR><BR><BR>_______________________________________________<BR>cisco-voip mailing
list<BR>cisco-voip@puck.nether.net<BR>https://puck.nether.net/mailman/listinfo/cisco-voip<BR></BLOCKQUOTE><BR><p> 
<hr size=1>See the all-new, redesigned Yahoo.com. <a href="http://us.rd.yahoo.com/evt=40762/*http://www.yahoo.com/preview"> Check it out.</a>