<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#000000">
so long as the terminating equipment (banks in your case) provides
answer supervision you should be able to send an infinite number of
DTMF. If the call is not going to the connected state then you are
going to stop around 24 digits. Can you get the CCM trace or q931
debug for an example call?<br>
<br>
/Wes<br>
<br>
Frazee, Timothy wrote:
<blockquote cite="midE660B86F-B9B6-423B-93B9-8F21249BA56E@mimectl"
type="cite">
<div><font color="#000000" face="Arial" size="2">
<p>is there a way to change the maximum number of digits I can enter
during an active call?</p>
<p>finance folks are on the phone with banks and inputting
information via dtmf. after a certain point, the bank stops receiving
digits as the system stops sending them. the ip phone stops showing the
digits on the screen.</p>
<p> </p>
<p>any help would be great.</p>
</font></div>
<div>
<hr>This message and any attachments are intended only for the use of
the addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended
recipient or an authorized representative of the intended recipient,
you are hereby notified that any dissemination of this communication is
strictly prohibited. If you have received this communication in error,
please notify us immediately by e-mail and delete the message and any
attachments from your system.
</div>
<pre wrap="">
<hr size="4" width="90%">
_______________________________________________
cisco-voip mailing list
<a class="moz-txt-link-abbreviated" href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a>
<a class="moz-txt-link-freetext" href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a>
</pre>
</blockquote>
</body>
</html>