Looks like it is a facility message:<br><br>Aug 3 14:40:32.499: ISDN Se0/0/0:23 Q931: RX <- FACILITY pd = 8 callref = 0x00<br>84<br> Facility i = 0x9F8B0100A117020179020100800F4E45544741494E20494E464F20535<br>9
<br> Protocol Profile = Networking Extensions<br> 0xA117020179020100800F4E45544741494E20494E464F205359<br> Component = Invoke component<br> Invoke Id = 121
<br> Operation = CallingName<br> Name presentation allowed<br> Name = ********************<br><br><div><span class="gmail_quote">On 8/3/06,
<b class="gmail_sendername">Ryan Ratliff</b> <<a href="mailto:rratliff@cisco.com">rratliff@cisco.com</a>> wrote:</span><blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
You need to find out how your telco is providing the calling name.<br>Is it in a display IE in the Setup message (this should work)? In a<br>Facility message (see CSCeg80845)?<br><br>-Ryan<br><br>On Aug 3, 2006, at 12:28 PM, Ryan Ratliff wrote:
<br><br>He was referring to CallManager receiving caller name display, not CME.<br><br>I don't have a CME router to test with but is there a command<br>available under the serial port for the PRI 'isdn incoming display-<br>
ie'? I know the command will be there for outgoing calls.<br><br>I can't say what specific types of inbound calling name display CME<br>supports. There are a few different ways the telco can send it.<br><br>-Ryan<br><br>
On Aug 3, 2006, at 12:18 PM, Israel Lang wrote:<br><br>I see the caller-id coming in, but not on the phone. My guess is CME<br>doesn't use MGCP and that is the problem. Any seconds to that notion?<br><br>On 8/3/06, Adam Blomfield <
<a href="mailto:adman@adman.net">adman@adman.net</a>> wrote: It is possible to<br>get calling name information over a PRI however to<br>achieve this you must be using the NI2 ISDN protocol on the trunk and<br>it must be connected to CallManager through an MGCP gateway. Any other
<br>ISDN protocols or an H.323 gateway will not work. You may see the name<br>information in an q931 debug but it will not be passed to the phone.<br><br>On 8/3/06, Israel Lang < <a href="mailto:zephy316@gmail.com">zephy316@gmail.com
</a>> wrote:<br>> I have a CME 4 system w/ a PRI to the telco. I fail to recall if I<br>can get<br>> caller-id over the PRI. I know I can get the calling number<br>displayed, but<br>> my question is can I get calling name displayed on incoming calls?
<br>><br>> Thanks.<br>><br>> --<br>> Have a great day!!!!!!!!!!<br>> zephy316_gmail.com<br>><br>> Replace the _ with an @ symbol<br>> _______________________________________________<br>> cisco-voip mailing list
<br>> <a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br>> <a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br>><br>
><br>><br><br><br><br>--<br>Have a great day!!!!!!!!!!<br>zephy316_gmail.com<br><br>Replace the _ with an @ symbol<br>_______________________________________________<br>cisco-voip mailing list<br><a href="mailto:cisco-voip@puck.nether.net">
cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br>_______________________________________________<br>cisco-voip mailing list
<br><a href="mailto:cisco-voip@puck.nether.net">cisco-voip@puck.nether.net</a><br><a href="https://puck.nether.net/mailman/listinfo/cisco-voip">https://puck.nether.net/mailman/listinfo/cisco-voip</a><br><br></blockquote></div>
<br><br clear="all"><br>-- <br>Have a great day!!!!!!!!!!<br>zephy316_gmail.com<br><br>Replace the _ with an @ symbol