<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=us-ascii">
<META content="MSHTML 6.00.2900.2180" name=GENERATOR></HEAD>
<BODY>
<DIV dir=ltr align=left><SPAN class=350162915-16082006><FONT face=Arial
color=#0000ff size=2>Huntstop settings on the lines themselves
ok?</FONT></SPAN></DIV><BR>
<BLOCKQUOTE
style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #0000ff 2px solid; MARGIN-RIGHT: 0px">
<DIV class=OutlookMessageHeader lang=en-us dir=ltr align=left>
<HR tabIndex=-1>
<FONT face=Tahoma size=2><B>From:</B> cisco-voip-bounces@puck.nether.net
[mailto:cisco-voip-bounces@puck.nether.net] <B>On Behalf Of </B>Israel
Lang<BR><B>Sent:</B> Wednesday, August 16, 2006 9:59 AM<BR><B>To:</B>
cisco-voip@puck.nether.net<BR><B>Subject:</B> [cisco-voip] CME
Issue<BR></FONT><BR></DIV>
<DIV></DIV>Have a customer with 3 analog lines coming into their office. 2811
router running CME 4 with IOS Version
c2800nm-advipservicesk9-mz.124-9.T.bin<BR><BR>Have the following voice port
and dial-peers set up:<BR><BR><BR clear=all>voice-port
0/0/0<BR> connection plar opx 7177<BR> caller-id
enable<BR>!<BR>voice-port 0/0/1<BR> connection plar opx
7177<BR> caller-id enable<BR>!<BR>voice-port 0/0/2<BR> connection
plar opx 7177<BR> caller-id enable<BR>! <BR>dial-peer voice 1
pots<BR> description ** FXO pots dial-peer
**<BR> destination-pattern 9911<BR> port
0/0/0<BR> forward-digits 3<BR>!<BR>dial-peer voice 2
pots<BR> description ** FXO pots dial-peer
**<BR> destination-pattern 9T <BR> port 0/0/0<BR>!<BR>dial-peer
voice 3 pots<BR> description ** FXO pots dial-peer **<BR> preference
1<BR> destination-pattern 9911<BR> port
0/0/1<BR> forward-digits 3<BR>!<BR>dial-peer voice 4
pots<BR> description ** FXO pots dial-peer ** <BR> preference
1<BR> destination-pattern 9T<BR> port 0/0/1<BR>!<BR>dial-peer voice
5 pots<BR> description ** FXO pots dial-peer **<BR> preference
2<BR> destination-pattern 9911<BR> port
0/0/2<BR> forward-digits 3<BR>!<BR>dial-peer voice 6
pots<BR> description ** FXO pots dial-peer **<BR> preference
2<BR> destination-pattern 9T<BR> port 0/0/2<BR><BR>7177 is pilot
point for a hunt group and here is that config<BR><BR>ephone-hunt 1 sequential
<BR> pilot 7177<BR> list 5001, 5093, 5094, 5002, 5003<BR> final
6001<BR> max-timeout 40<BR> timeout 15, 10, 10, 7,
7<BR> statistics collect<BR><BR>The problem lies in that when ever we get
two calls and third call is made inbound or tried outbound the calling party
gets a busy signal. <BR><BR>I have physically called all the numbers
individually and they all work therefore ruling out a line issue. All the FXO
ports look good.<BR><BR>Any help would be greatly
appreciated.<BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR><BR>-- <BR>Have a
great day!!!!!!!!!!<BR>zephy316_gmail.com<BR><BR>Replace the _ with an @
symbol </BLOCKQUOTE></BODY></HTML>